Thank you for telling me how to depressurize the fuel tank. It may be obvious to some folks, but I am not one of them. Another video mentioned the need for this but did not explain how, so I was glad you did.
@kademztv45155 ай бұрын
Small washer is for the bottom connection..If you check it looks like a cone there. That's where the copper ring sets, sometimes old ones are stuck from the olde filter when removed.
@anonymoususer5794Ай бұрын
Torque specs are 25 lbs/ft. Thanks for the video.
@Shimmernut9 ай бұрын
Full of great tips, thank you!
@bigsoulstar Жыл бұрын
needed this. thanks bro
@giovannimolina3784 Жыл бұрын
Great video. Thanks for showing the tools needed. Appreciate it
@charlie_sam Жыл бұрын
Thank you :), will be making more soon
@chrismaughan155 Жыл бұрын
Very helpful. Will doing this on my 96 hatch. Mine was leaking from the top haha
@CityRaisedCountrySoul10 ай бұрын
I had a 98 Civic changed it it was soo easy
@Topdogchase8 ай бұрын
Hell yea bro 🔥🔥🔥 content keep up the hard work 💯
@charlie_sam8 ай бұрын
Thank you 👌🏼
@danieltenorio3559 Жыл бұрын
By any chance have u changed an oil filter for a civic 2012 or where it’s at bec I can’t find no viedos on that
@charlie_sam Жыл бұрын
No sir sorry
@grockindabuilding474410 ай бұрын
Can u recommend where u got your filter I used a autozone filter and had to return it . Would not seat properly with the washers
@charlie_sam10 ай бұрын
FF696DL is the part number and it is from autozone, at 0:20 you can kinda see the box sorry 😅
@grockindabuilding474410 ай бұрын
autozone and advance both leaked on me/i used the supplied washers gonna try a oem from honda, any suggestions what went wrong?
@grockindabuilding474410 ай бұрын
both from the top/waiting on oem, tried putting old one back-leaks but very small/while I wait for oem
@charlie_sam10 ай бұрын
@@grockindabuilding4744 it sounds like its not the rings but where its sitting might have a bad threads, if the threads are bad you need teflon tape
@dexter7s847 Жыл бұрын
its that your car is vtec?
@keepingupwiththetrustys5632 Жыл бұрын
How often should the filter be change?
@charlie_sam Жыл бұрын
Good question. Usally around 50k depending on the driving and what type of gas is put in, cheap gas will have a lot of particles, hint:don’t let your gas get to low because fuel pump well pump up the little debris left on the bottom of the tank
@malachichanthasena8002 Жыл бұрын
mine keeps leaking when i prime the fuel pump
@charlie_sam Жыл бұрын
Try to find where -be careful because the threads they’re really easy to strip, especially from the hard line -what some people like to do on the threads is put Teflon tape if it’s not sealing right, but do it at your own risk it’s not recommended but that’s what some people do for last resort. Good luck