How To Change a Hayward Pump Seal / Hayward Pool Pump Seal Leaking?

  Рет қаралды 41,482

VIP Pools and Spas

VIP Pools and Spas

3 жыл бұрын

How To Change a Hayward Pump Seal
A swimming pool pump shaft seal prevents water from leaking along the pump motor shaft. Even the most expensive pool pump has its pump shaft seal fail at some point. As a result, you will see water running down the backside of the pool pump or between the motor and wet head. A leaking Hayward swimming pool pump seal can cause damage to the pool pump motor and also cause loss of pressure in the pool water lines.
❤ SUBSCRIBE - kzfaq.info...
🎁TIP JAR - PAYPAL: paypal.me/vippoolsandspas?cou...
-------------PAID LINKS BELOW-----------------------------------
✔ Hayward Super Pump Seal Kit
amzn.to/37tpin0 CANADA
amzn.to/3xADbdA USA
✔ Hayward Super Pump Impeller
3/4 HP - amzn.to/3JV2wBN CANADA
1 HP - amzn.to/3Eyk1Xu CANADA
1.5HP - amzn.to/3JViegb CANADA
NOTE: Check ID on the impeller
✔ Pool Pump Bearing Puller:
amzn.to/3OxcY63 CANADA
amzn.to/391zgMQ USA
✔ Volts and Amps Tester
amzn.to/37qsKyA CANADA
amzn.to/3Mej4Gl USA
✔ Pool and Hot Tub Wrench
amzn.to/3KWmdKI CANADA
amzn.to/3vtslDv USA
✔ Pool O-Ring Lube
amzn.to/3Eq40mq CANADA
amzn.to/3KVn2Du USA
✔ Pool and Hot Tub Silicone
amzn.to/3JTkCnA CANADA
amzn.to/3uRwj9V USA
❤ FACEBOOK - / vippoolandspa
😎 Join this channel to get access to perks:
/ @vippoolsandspas

Пікірлер: 34
@VIPPoolsandSpas
@VIPPoolsandSpas 3 жыл бұрын
Follow the video close and you'll see tricks on how the professionals install a pump seal.
@bradsnapp8437
@bradsnapp8437 3 жыл бұрын
I thought you weren't suppose to touch or put any type of lube other than water or water based lubes on the seals.
@VIPPoolsandSpas
@VIPPoolsandSpas 3 жыл бұрын
@@bradsnapp8437 it's ok. Never had any issues. We are talking about the silicone right? If so, get the stuff I suggest because that's the stuff I've used for years with no problems and no call backs because it leaked again. I would say that doing it this way will make your seal last longer.
@jimbosander
@jimbosander 3 жыл бұрын
How critical is it to NOT touch the ceramic sides with bare hands? The pool shop advised wearing gloves although, I can't imagine it's THAT sensitive, but probably not a bad idea either?
@VIPPoolsandSpas
@VIPPoolsandSpas 3 жыл бұрын
@@jimbosander no big deal
@johnnoakes9576
@johnnoakes9576 Жыл бұрын
Great video brother. It was exactly what I needed to get my pump motor gaskets on! Thank you and God bless.
@VIPPoolsandSpas
@VIPPoolsandSpas Жыл бұрын
Thanks for watching.
@keithguay7523
@keithguay7523 Жыл бұрын
Thank God you ended up taking that rubber piece off or I was heading to fix a pump again… Lol Thanks man great video!!! 💪
@VIPPoolsandSpas
@VIPPoolsandSpas Жыл бұрын
Thanks for watching. Give the video a LIKE
@keithguay7523
@keithguay7523 Жыл бұрын
@@VIPPoolsandSpas already did!
@gonzalomadero9848
@gonzalomadero9848 2 жыл бұрын
Excellent video, very instructive. Thank you.
@VIPPoolsandSpas
@VIPPoolsandSpas 2 жыл бұрын
Glad it was helpful!
@chriscatalan9995
@chriscatalan9995 2 ай бұрын
Awesome video ! very easy instructions. Would you happen to know a part number for the seal kit you installed? Or any suggestions of where I should look to find one
@VIPPoolsandSpas
@VIPPoolsandSpas 2 ай бұрын
Is there a link in the video description?
@jeromecholewa8651
@jeromecholewa8651 Жыл бұрын
Great video! I had been looking for exactly that! Do you have a video explaining what the flinger seal on the motor side does and how to replace it?
@VIPPoolsandSpas
@VIPPoolsandSpas Жыл бұрын
A V-ring or flinger protects the shaft bearing by blocking dust and other contaminants. On the hot tub or pool pumps it's just a rubber piece and can be made. Again, its just to block crap from getting too the bearing.
@Backfire10
@Backfire10 Жыл бұрын
Also, you are not supposed to touch the ceramic part (white part) of the seal; so they say. Oils from your hands contaminate the seal. Nice Video.
@VIPPoolsandSpas
@VIPPoolsandSpas Жыл бұрын
its all fine. never hand an issue.
@yamaha-rb9tk
@yamaha-rb9tk Жыл бұрын
Correct, never get any contamination on the seal face. Can clean with denatured alcohol if it does get dirty.
@canucmikey
@canucmikey 3 жыл бұрын
trying to find the "new" type of seal but cannot locate, what is PN @VIP pools?
@VIPPoolsandSpas
@VIPPoolsandSpas 3 жыл бұрын
Looking for the salt water seal? That would be the best one.
@canucmikey
@canucmikey 3 жыл бұрын
@@VIPPoolsandSpas yes
@VIPPoolsandSpas
@VIPPoolsandSpas 3 жыл бұрын
@@canucmikey USseal02V or PS201V. This is for salt water and or ozone equipment.
@canucmikey
@canucmikey 3 жыл бұрын
@@VIPPoolsandSpas thanks
@pippycat9915
@pippycat9915 2 жыл бұрын
Why is the motor sideways?
@VIPPoolsandSpas
@VIPPoolsandSpas 2 жыл бұрын
lol. Nice caught. It was a customers pump and he turned it sideways for his situation in the pump house. You put it back together the way you take it apart.
@jamesbradford1815
@jamesbradford1815 Жыл бұрын
I had a new variable Hayward pump installed as part of a my pool build. The unit began to leak within 4 weeks. The pump was replaced with a new unit as it was under full warranty. The second pump failed within 48 hrs, again pointing to a shaft seal leak as the source of failure. This time the seal was replaced. Within 24 hrs, this fix also failed with water pooling on the floor. Now the Hayward Regional rep is going to take a look at the issue…..hmm quality control I believe is the issue.
@VIPPoolsandSpas
@VIPPoolsandSpas Жыл бұрын
I'm guessing you have a salt water pool? Putting the right seal in a pump is key and the silicone helps a lot.
@jamesbradford1815
@jamesbradford1815 Жыл бұрын
Salt unit has not been turned on, as we are just running the pump to circulate water during winter. Three failures points to issues with seal installation at the factory. The Regional Hayward rep will be here tomorrow….I am expecting a new pump at Hayward’s cost/expense.
@VIPPoolsandSpas
@VIPPoolsandSpas Жыл бұрын
@@jamesbradford1815find a video for your pump that shows changing a seal. Also. Get a seal or 2 for backup. Warranty won't always cover it.
@jamesbradford1815
@jamesbradford1815 Жыл бұрын
Hayward Rep came out on site and indicated they had a production issue resulting in seal failures. The original pump installed Oct 2022 and replacement Dec 2022 were of sequential serial numbers…and were back to back production units. The Rep authorized a third pump, from a different production run, which will be installed tomorrow…so I am keeping my fingers crossed.
@jamesbradford1815
@jamesbradford1815 Жыл бұрын
I spoke too early. Third pump failed in 48 hrs. There is a production issue here.
How to Change Seals on a HAYWARD Super Pump!
8:51
Hallmark Pool Supplies
Рет қаралды 198 М.
Replace Leaking Shaft Seal on Pentair Pool Pump
13:12
Fix It With Jake
Рет қаралды 56 М.
Mom's Unique Approach to Teaching Kids Hygiene #shorts
00:16
Fabiosa Stories
Рет қаралды 33 МЛН
Пранк пошел не по плану…🥲
00:59
Саша Квашеная
Рет қаралды 6 МЛН
Sigma girl and soap bubbles by Secret Vlog
00:37
Secret Vlog
Рет қаралды 14 МЛН
How to Replace a Hayward Super Pump Motor step by step
13:12
BobsPoolService
Рет қаралды 115 М.
How to Change Seals on a Hayward PowerFlo Matrix Pool Pump!
9:56
Hallmark Pool Supplies
Рет қаралды 33 М.
How to Fix a Pool Pump Pipe Leak (Glue Fittings)
2:30
VIP Pools and Spas
Рет қаралды 12 М.
How To: Replace a pool pump motor shaft seal
12:13
Inyo Pools
Рет қаралды 310 М.
Hayward SP15921FP Pool pump leak repair
8:23
BravoFix
Рет қаралды 82 М.
TriStar Pump Seal and Motor Replacement
7:27
Hayward Pool Products
Рет қаралды 40 М.
How to PRIME a Swimming Pool Pump | Very Informative!
12:50
Hallmark Pool Supplies
Рет қаралды 381 М.
Mom's Unique Approach to Teaching Kids Hygiene #shorts
00:16
Fabiosa Stories
Рет қаралды 33 МЛН