Thanks for this. Saved me since my shifters didn’t come with instructions.

Great video, super easy explanation! Straight to the point, I love the accent, hahaha

Just wanted to say thanks, this is so clear and straightforward, no faff, just good quality information.

I believe other videos are sincerely produced to help. But they don't. This one is by far the best I have seen, clear, short, and to the point. None of the key steps and comments were left out. Now I know I can take care of my shifters brake cables.

I had problems with two different aspects of a 105 r7000 groupset and spent hours trying to get past them. I looked up videos, forums, and everywhere else but had no luck. Videos from this guy solved both problems and the bike is on the road. Awesome stuff!

Fast, simple and clear instructions, most helpful video yet. Thank you!

I have been reinstalling and setting up this R7000 front derailleur today and it’s quite a fiddly and temperamental design! Even with everything aligned as carefully as possible it still seems very hard to find good high and low stop settings, particularly on the large chain ring. If you set it to just skim on the highest gear (smallest on the rear) you get noise on the lowest one or two. If you try and open up the gap a touch more to be sure it’s not rubbing on the highest, the noise extends to the lowest two or three lowest. It seems as if the cage is just not quite wide enough to accommodate the cross chaining on the 2x11 drive. Other problems: it can be hard to distinguish between noise from rubbing and noise from the chain against the ring due to cross chaining. Be careful with the chain guide height over the large ring. If you make it too small (say about 1mm) the chain rubs against the bottom of the cage when the largest gears front and rear are selected.

Thumbs up sir!! Concise, straight to the point! Thank you

Just changed my gear and brake cables, all now working as they should. Great video, thank you.

As always, clear and perfect to understand. thanks a lot

Excellent video. Clear and concise. All the information and no fluff. This gave me confidence in installing a new gear shifter. Shimano website instructions were either unavailable or so well hidden that I could not find them.

Glad I clicked on your tutorial first! Cheers!

Really helpful, clear and straight to the point thanks!

Thank you for the explanation. Your videos are thorough and clear to follow. I’ve installed an entire groupset following your stuff thanks! Cheers

Its really helpful as its been years since i did my last brake-shifter cables routing

Brilliant very good video will have a go on my 105 shifters

Thanks a bunch...saved me loads of rework on installing my new R7000 group set...much appreciated clear instruction!

Sehr gut beschrieben und gezeigt ! 👍🏼

Thanks 🙏🏾 a million 👊🏼

going to change mine out later today. thanks for the help!

Thanks for this video, will be swapping groupsets and was not sure about this part

Well done on the shimano 105 shifters. After my first ride I'll be checking out your station for advice on electric shifting. Seems like that will be the future, and its coming fast. Thanks.

Thank you. Very helpful. I can now proceed with confidence!

Practical and thorough explanation :)

Great video thank you so much

Awesome video, thank you very much!

Could you do a video covering the installation of inline barrel adjusters? I love your ‘to the point’ style and all the other videos out there are full of waffle. Maybe a quick explanation of what they do/how they work and then how to install them? 🙏

concise and helpful explanation. Cheers

Great demo, thanks!

Thank you so much! Your video is very helpful 👍

Thanks - nice instructions and good camera work!

Excellent as usual. Thanks mate.

Excellent explanation, thank you!

Thank you for this video! 👍🏼

Thank you. Good info you'd think Shimano would provide, grateful you did. By the way you are identical to my mate from Bristol, it's uncanny.

Thanks!

Thanks mate! Gr8 vid!

You are a legend

Thanks

Lifesaver! Cheers!

Cheers very helpful

Thank you fot this VIDEO 😀 I gonna change first time gear cable in my shifter. You help me a lot. Greetings from London 👋

I watch this video every time I install 105 shifters

Thanks a lot for sharing

thanks you help me out

Thank you!

Very good interesting video

Thanks.

Terima kasih atas video nya 👍

Sweet as a nut. Thank you very much.

Thanks for this . Sounds like you might come from the Bristol Area ? Do you have a bike shop or do repairs ?

thank you.

Gracias

Great video and easy to follow. Will these shifters work with BR650 long drop calipers?

working on an old road bike. cheers

What’s the difference between the 10 speed and 2 x 10 speed Shimano 105 shifters?

what does it mean when the lower shfter when u push it stays in place

Hi, my left shifter isnt the same as right when it comes to the recess hole that the gear cable sits. The right hand one is as you describe but the left doesn't have sufficient room for the cable end to seat. Should they be identical? Thanks

Do they sell optislick specific inner cable? I need to replace the fd inner cable for my 2021 Domane sl5 and looking for the correct part.

Does anyone know if I need special set of cables or have a link?

Would you happen to know the Shimano part numbers for those outer ferrules please

I’m wondering if I’m missing something, I’m trying to remove the existing cable, I’ve shifted it all down to the smallest cog, But I don’t see the end of the cable inside the lever yet, it offers some resistance, am I missing a step? Unscrewing something maybe? Or just force pull it?

Would anyone happen to know if the Shimano 105 R7000 11 speed STI shifter set can be connected to the Magura MT 8 Carbon Disc Brakes?

hi there my shifters dont include that 2:46 , would work correctly without it?

Looks easy when you don't have old cables installed. I can't remove old cable from gear. It stucked some way. Don't know what to do to remove it.

Do Shimano left shifters always work the front derailleur & right shifters always work the rd? I am setting up rx600 hydro shifters and i am not 100% sure...😚😚

Any relation to Sheldon?

will the 56 cm fit a 6'2" guy?

wait ! why my 5700 are not like those ?

What is the name of item at minute 2:45?

Thanks