Shimano Ultegra dual control shifter cable replacement

No video

Shimano Ultegra dual control shifter cable replacement

Рет қаралды 83,355

Күн бұрын

Cable routing through a Shimano ST-6800 dual action leverset to the derailleur.
Similar models are ST-4700, ST-4703, ST-5800, ST-9000, ST-9001 found in the Tiagra, 105, Ultegra and Dura-Ace groupsets.
Symptoms of cable failure are gradual, include chain not changing gears on cassette when shifter is operated, derailleur not moving at all when shifter is operated. Braking is totally unaffected.
Shimano Ultegra dual control lever
si.shimano.com...
Shifter mounting bolt 6.0 - 8.0 N·m {53 - 71 in. lbs.}
Shifter housing screw 0.20 - 0.25 N·m {1.7 - 2.2 in. lbs.}
Derailleur cable clamp bolt 6 - 7 N·m {53 - 62 in. lbs.}

Пікірлер: 38

@madrabbit64 3 ай бұрын

My rear derailleur cable did this on my last 40 mile ride…..shifting had become erratic and it finally gave up. It had been awhile since I’d done one of these. Thanks to your video I went ahead and did all four cables just in case. Thank you, great video.

@srknight307 3 жыл бұрын

Used this video yesterday, saved me loads of time thank you! I needed to remove the lower piece of plastic too to get the broken cable head out.

@TL243 3 жыл бұрын

ok not much new here except one key piece for me. The finger nail pull back of the flap without removing it starting at 6:10. Man, that saved me so much effort and time.

@caahacky 3 жыл бұрын

Excellent video - just the detail I need. Thank you so much.

@richardallen3993 Жыл бұрын

Thanks, mate. I just found your video and resolved my problem exactly as you've demonstrated. You've saved me an expensive trip to a bike shop. Top bloke :)

@theoverengineer Жыл бұрын

You're welcome!

@tommyc.4251 8 ай бұрын

Thanks for the excellent video! My new years day project before kids wake up 😁

@luisceja8121 11 ай бұрын

Woooooooow save me lot of money two shops told me I needed new shifters. I remove the boat like suggested in the video in the old cable was still there. Oh my God thank you for this video.

@theoverengineer 11 ай бұрын

Glad it helped!

@Bushviking Жыл бұрын

Excellent! You are a lifesaver, i managed to get that broken cable head out thanks to this video. Many thanks!

@theoverengineer Жыл бұрын

You're welcome!

@frankreiter5100 3 жыл бұрын

Perfect explanation. I fixed everything by my on also the rests of the broken cable. Thank u

@robertkennedy7649 2 жыл бұрын

Followed the video today made the job simple thank you for sharing

@WasabiBunny 2 жыл бұрын

This was really helpful, thanks for posting. Feel like I need to do my lawn now, not sure why 😉

@theoverengineer 2 жыл бұрын

Glad it was helpful!

@Rangsit997 3 ай бұрын

This is very helpful video. Thank you,

@turbofranz9334 Жыл бұрын

Very usefull close ups!!! Thank you!

@cosycamperconversions Жыл бұрын

Great video thanks

@gunruncycle1503 9 ай бұрын

Thank you a really good video, and nice explanation

@theoverengineer 9 ай бұрын

Glad it was helpful!

@jonathanrogers611 Жыл бұрын

My screw has rusted, i cant open that bottom panel. Any tips? Great video

@theoverengineer Жыл бұрын

Oil? + patience ... awww ... it's a tricky one. Just don't butcher it, you need all the metal remaining in the screw head to turn that thing, eventually ...

@roberttyszko6138 Жыл бұрын

Here is the next video to show to set tension?

@lonniecu6726 3 жыл бұрын

Thanks so much got it fixed

@milkdud3618 3 жыл бұрын

Great job many Thanks

@apocalypsee94 3 жыл бұрын

Great video, Thanks!

@theoverengineer 3 жыл бұрын

Glad you liked it!

@hktkferg 3 жыл бұрын

Very good thanks.

@tonajamal Жыл бұрын

Good

@caahacky 3 жыл бұрын

Ah but now I have removed the broken end of the cable - like yours - from underneath, but the ratchet wheel will not turn.

@theoverengineer 3 жыл бұрын

Ouch. Keep looking, a bit of broken wire strand is stopping it.

@caahacky 3 жыл бұрын

@@theoverengineer I found the problem! The rubber hood cover was contacting one of the ratchet pawls and stopping the wheel turning - because I had removed the round plastic cover underneath to get the broken end out. Thanks again for the excellent video.

@usafmd 2 жыл бұрын

I had the same problem. Turns out the rubber hood needs to be flipped back for it to work! Thanks to my friendly LBS!