How to change front rotors and pads on Ford Mustang V 2005

How to change front rotors and pads on Ford Mustang V 2005 - 2013

Рет қаралды 29,299

8 жыл бұрын

In this video I try and give you as many details as I can for you to replace yourself the front brakes on a 2009 4,6 V8 Mustang.

Пікірлер: 30

@gr8pony502 5 жыл бұрын

Fantastic videos (front and rear brakes). Very helpful, right down to what tools to have on hand, important details, tips and techniques. Thanks very much!

@fab-b9818 5 жыл бұрын

Thanks Craig ! Glad you appreciate and find them useful 😃 !

@ninemilliondollars 5 жыл бұрын

I recommend when compressing the caliper pistons to first open the brake fluid reservoir. This will reduce pressure on the pistons and make it easier to compress. Also, depending upon whether you've been topping it off, you don't want it to overflow, so remove some of the fluid if it's at the "MAX" mark.

@totljag1 7 жыл бұрын

Thanks for this video 😃 u helped me change my brakes with ease on my 2007 mustang ! My first brake job ! Great video ! Thanks again

@fab-b9818 7 жыл бұрын

You're welcome ! Glad I helped you with your first brake replacement ;)

@tysonshears63 3 жыл бұрын

Twqy

@tkkak1932 6 жыл бұрын

Thank you explaining everything in simple English. The other videos I watched just said do this do that with no explanation

@fab-b9818 6 жыл бұрын

You're welcome, happy to hear that my explanations are clear ;¬).

@vbeck5517 6 жыл бұрын

it sure did help !!got i done from your great detailed video!!!! nice of you to take the time and do that !! i savded my son 400 bucks.

@fab-b9818 6 жыл бұрын

Sweet ! There are better things to do with those 400 bucks ;¬) !

@tuft7775 5 жыл бұрын

Awesome video Fab.. Thanks so much for posting; a great help with changing my Pads on my Mustang for first time! Your Calipers look great sprayed too...something I may do in time. Drive Safe in your super GT!

@fab-b9818 5 жыл бұрын

Thankyou James ! My pleasure, sadly it was not my car but a friends', so please make the most of your V8 for me 😄 ! For the calipers make sur you take a good quality paint (high heat resistance). Cheers.

@andrewconlow5627 5 жыл бұрын

Excellent Video! Thank you!

@fab-b9818 5 жыл бұрын

thanks ! My pleasure 😉 !

@mathewdavis-adventuresandd6643 7 жыл бұрын

Thank you very much for the video. I have the new rotors setting in the my car now and that is today's project. Wish I had seen the video earlier and I would have picked up some heat resistant paint also.

@fab-b9818 7 жыл бұрын

My pleasure ! Hope everything goes well for you and next time you'll paint them ;¬) !

@vbeck5517 6 жыл бұрын

what a great job !!thanks you helped!!!victor !!!! god bless

@fab-b9818 6 жыл бұрын

Thank you ;¬) ! Great if it helped you :¬).

@mustangmatt7605 6 жыл бұрын

Thanks for the help!

@fab-b9818 6 жыл бұрын

My pleasure !

@winkawak 3 жыл бұрын

my parking cable seal sleeve thats attached to the caliper are ripped, will this be a problem?

@rw5367 5 жыл бұрын

😊👌

@totljag1 5 жыл бұрын

The only thing I did not do and u did not do in the video was clamp ur hose once u put the clamp on The pistons ! Does the bad fluid go back in our system ?

@fab-b9818 5 жыл бұрын

No need to clamp as we don't open the brake hose, When we push back the piston a small amount of fluid is pushed back but it's not an issue. What is importnatn though is to fully bleed the brakes every 2 years to have new one.

@markmanning2451 Жыл бұрын

Loctite! The glue hardens without air.

@jasonweiss7757 5 жыл бұрын

Don't believe they made 4.6l on a 2011 Mustang. The fact you don't even know what your car is, Seems pretty scary your making a "how too" video......

@fab-b9818 5 жыл бұрын

It wasn't my car, first of all, and check your knowledge before writing, the 4.6 V8 was available on the 2005 to 2013 Mustangs...

@jasonweiss7757 5 жыл бұрын

@@fab-b9818 I believe my knowledge is just fine, I believe you need to check yours. The 2011 to 2014 Mustangs have the Gen I Coyote which is a 302 cu in 5.0 L. The 2010 was the last year to have a 4.6 L. More reason why you shouldn't be making a "how to" video.

@jasonweiss7757 5 жыл бұрын

@@fab-b9818 en.wikipedia.org/wiki/Ford_Mustang_(fifth_generation) You might learn something.

@fab-b9818 5 жыл бұрын

Orally I said 2011, it was a mistake, working on different cars I sometimes get mixed up, but in the video description I wrote 2009. The brakes are the same I believe so the engine type (4.6 or 5.0) isn't relevant. Now tell me what's wrong in the way I proceeded for the brake change because that's what's important, much more that a production year. And guess what, I have over 400 "how to" videos on my french channel, helping a lot of people out, do you think I'm going to stop for a couple of guys like you who complain for criticise for the smallest things ?!