In this video I tried to give you as many details as I could if this is your first time replacing brake pads and/or brake discs on your 1999- 2005 Toyota Yaris/Echo/vitz.
Пікірлер: 55
@karenrlock6 жыл бұрын
I am pretty handy, but I'm no expert on cars. This tutorial made changing the brake pads on my 2003 Toyota Echo about as easy as changing a tire! Thank you.
@fab-b98186 жыл бұрын
Hi, happy I could help ;¬) !
@crystalwright55813 жыл бұрын
.aa
@HeatMyShorts3 жыл бұрын
Thank you for this video. Just finished our Echo's pads so easily by watching this
@pierregoyette10745 жыл бұрын
Yhanks for your video, you are the only one i found who explain which side goes the pads support plates!
@fab-b98185 жыл бұрын
You're welcome ! Gad you found what you were looking for in my video 😉.
@gluteusmaximus35024 жыл бұрын
Well done mate. Looks simple to do for my 2007 Yaris project.
@alm47373 жыл бұрын
Got it done. It was a breeze thanks to your video. Cheers
@cotcotpouetpouet4 жыл бұрын
Merci pour tous ces détails !
@lornejuchli63436 жыл бұрын
I what to thank you very much for this great video.Saved me lots of time and trouble.!! Thankyou
@fab-b98186 жыл бұрын
You're welcome, glad it helped you :¬) !
@michaelcarletti7666 жыл бұрын
great video .Very well done! thanks for your time and help
@fab-b98186 жыл бұрын
Thanks Michael, glad I could help ;¬).
@bradkerr44784 жыл бұрын
very clear and informative!
@stevenking7352 Жыл бұрын
Newbies note! The reason FAB-B uses an old brake pad on the piston to compress it, is to avoid damaging the walls of the piston by pushing on just one side or the other. Such damage can lead to the caliper freezing up. If it does, you will notice the pull to that side and the SMELL of your pads "burning". Like that you cleaned the bracket components, but shouldnt' there be a wee bit of hi temperature grease on the bracket surfaces where the pads ride? (And on the backs of the pads where the caliper piston sets? oops, I spoke too soon)
@MrKarlito8197 жыл бұрын
Great video! thanks for sharing. So helpful.
@fab-b98187 жыл бұрын
Thankyou ! Happy to help ;¬)
@alokalakruwan4 жыл бұрын
Thanks bro. Very helpful 👌
@heiner717 жыл бұрын
Very helpful video. Great job!
@fab-b98187 жыл бұрын
Thankyou, glad if I can help :¬).
@jesussaves66716 жыл бұрын
You're the man. Thank you so much
@fab-b98186 жыл бұрын
Thanks, my pleasure ;¬).
@stevenolsen63606 жыл бұрын
spot on advice, THANK YOU x 1000
@fab-b98186 жыл бұрын
Great, it was a pleasure !
@antonioalbino99946 жыл бұрын
Man that was really helpful ! Thank you
@fab-b98186 жыл бұрын
You're welcome !
@paulfitterer55764 жыл бұрын
Really helpful, thanks!
@alm47373 жыл бұрын
Very helpful. Thanks
@thorstenh11225 жыл бұрын
Super Video !
@fab-b98185 жыл бұрын
Merci 😉 !
@simonsuen8096 Жыл бұрын
Excellent video. One question: how can I turn the steeling wheel to an angle when only one wheel is jacked up? Thanks.
@bayleedm43365 жыл бұрын
Awesome
@MrBiggabit3 жыл бұрын
Nice 👍
@davidvalens33374 жыл бұрын
could you do a tutorial on how to fix a broken hood latch on the Yaris?
@tylernorthwood47353 жыл бұрын
thanks
@1nv1nc1bleczars7 жыл бұрын
excellent!
@fab-b98187 жыл бұрын
Thanks ;).
@DaveBegotka8 жыл бұрын
Thanks!
@fab-b98187 жыл бұрын
My pleasure ;)
@HaiderAli-hq9op2 жыл бұрын
my friend. Toyota Yaris caliber itself fits the Toyota Echo
@grabitz6 жыл бұрын
Thanks .
@fab-b98186 жыл бұрын
You're welcome ;¬).
@umutgunaydi36277 жыл бұрын
Great diy but why did you not use grease behind your brake disc as i that on the other videos
@fab-b98187 жыл бұрын
Thanks ! I did put copper grease between the back of the pads and the caliper. Did you mean something else ?
@somethingtrulyhorrifying7 жыл бұрын
Hey man, I read this and I think he means between the rotor and the hub assembly...Great video though, couldn't explain it much better than this. Did the brakes and rotor on toyota echo after watching, felt good.
@fab-b98187 жыл бұрын
Hi, you're right, that's probably what he meant. I didn't put grease there but indeed it's not a bad idea to avoid sticking of the rotor. Glad you found my explanations clear and good on you for the doing the job ;¬).
@mathieulacasse48635 жыл бұрын
Why is it that even after changing the pads, at the very end, we can still some sort of grinding noise when attempting to spin the wheel?
@fab-b98185 жыл бұрын
The padsare still "rough" and they have to bed in witht the discs, so that grinding noise is normal just after the job (if everything has been well mounted).
@Heavy69Metal3 жыл бұрын
Can you use anti seize grease?
@fab-b98183 жыл бұрын
Yes, but if you are not familiar with the use of that grease, better not put any.
@francisd-trepanier57355 жыл бұрын
mon echo commence a sifler quand je roule, parfois non. Est-ce un signe d'usure?
@fab-b98185 жыл бұрын
Très difficile à dire comme ça, ça peut venir de tellement de choses...
@francisd-trepanier57355 жыл бұрын
egalement un probleme au niveau du filtre a air kzfaq.info/get/bejne/qNV6qNZzptSyiX0.html
@fab-b98185 жыл бұрын
En effet ça bouge pas mal ! J'ai l'impression qu'un support moteur est mort, du coup toute cette partie du moteur tremble exagérément.