How to Replace Toyota Drum Brakes Like a Pro

Рет қаралды 601,607

Күн бұрын

A Toyota Master Diagnostic Technician Shows you how to replace Drum Brakes on your Toyota like a Pro!
In this video that my viewers have asked for, I share with you how to replace your Toyota Drum Brakes. I share with you tips and tricks that I've learned over a long career as a Toyota Technician leading to opening my own Toyota\Lexus specialty shop.
There's a hundred ways to replace drum brakes, I share with you the way I've replaced drum brakes without any issues.
Drum brakes are often regarded as hard to change when compared to conventional disc brakes. However they are actually not difficult if you have the right set of skills and knowledge.
I hope this video and others on KZfaq help make your drum brakes replacement easier.
TCCN Automotive Inc.
Toyota and Lexus Specialist Repair
Visit www.tccnautomotive.com to schedule your appointment today.
Check out the second channel :
/ @thecarcarenutreviews
Recommended Tools:
Basic Scan Tool amzn.to/3Jm6aom
Very good DIY Scan Tool amzn.to/3zF7dvH
Advanced Scan tool amzn.to/3q3L3QQ
Spill Free Coolant Replacement Funnel amzn.to/3uJfKxm
Sun roof drain cleaning tool amzn.to/3GMDlQ9
Good DIY Torque Wrench 1/2" amzn.to/3gE9bnw
Wireless Apple CarPlay for Toyota\Lexus amzn.to/3uKElSo
Very Good Triple Camera Borescope amzn.to/3MrgFs0
*as an Amazon associate, I earn from qualifying purchases.
Follow the channel on Social Media :
/ thecarcarenut
/ thecarcarenut
Check out the channel Merch store
/ @thecarcarenut
Support the channel on Patreon:
/ thecarcarenut
Make a one time donation to the channel:
www.paypal.me/CCNdonate
Check out the amazon store:
www.amazon.com/shop/thecarcarenut
*as an Amazon associate, I earn from qualifying purchases.
#thecarcarenut #tccnautomotive #toyota
0:00 Intro
0:38 Removal
5:02 Preparing your New Shoes
10:50 Preparing Backing Plate
11:51 Installing New Shoes
18:04 Preventing Noise and Issues
21:11 Drum Installation
23:02 Drum Brake Adjustment
25:16 Important Information About Drum Brakes

Пікірлер: 718

@cachanillabc9049 Жыл бұрын

Great videos like always. This guy is probably the most knowledgeable Toyota tech in the USA.

@icosthop9998 Жыл бұрын

True

@gregjones8501 Жыл бұрын

He’s definitely set aside from the rest! 💯✊🏾

@onesri6108 Жыл бұрын

Better than Jesus?😊

@puchu9507 Жыл бұрын

Well, Scotty Kilmer has been there for a long time.

@paulgraumann2774 Жыл бұрын

I agree this guy really knows his stuff and is great at explaining the fiber points that most YTubers slip over or just touch on.

@christy6828 2 күн бұрын

This is one of the very best brake shoe replacement video's I have ever seen. I like that you take the time to show what needs to be done, and you also explain why it needs to be done. You have helped a lot of people, and you inspire confidence to do it yourself. Thank you very much.

@jhaedtler Жыл бұрын

So nice to see a mechanic take his time to do the job correctly! Thank you sir! Thanks for the videos!

@mysoap23 Жыл бұрын

That is ideal but most customers don't want to pay for that time.

@jhaedtler Жыл бұрын

@@mysoap23 Well, then they should not own a car! I'm an aircraft mechanic. I have seen shitty wrenches and lots of broken cars. The car mechanic screws up it only cost them money. If I screw up I go to jail for Manslaughter! It is not all black and white Junior!!!

@mysoap23 Жыл бұрын

@@jhaedtler Why are you having a go at me? I speak from experience in saying that most customers don't want to pay for that time. Obviously you still do the job correctly regardless. Also if I were to make a mistake on a car and it causes an accident killing someone I'd also being going to jail for Manslaughter.

@LAactor Жыл бұрын

@@jhaedtler who are you aircraft maintenance for?

@jhaedtler Жыл бұрын

@@LAactor ME! I have done this all my life!

@hhattingh Жыл бұрын

Plueeeeze! More DIY uploads! Thank you. More and more people are trying to do repairs themselves, not buy new cars. Thank you for this.

@longnguyen-zu1qe Жыл бұрын

❤ cause no money my man, got to learn from him. 😊

@eugenesotomayor545 2 ай бұрын

Im one of them😂

@DIYDaveOK Жыл бұрын

I did my very first set of rear Corolla drums ever a few months ago and wish I'd had this video!! It was SUCH a pain! 😃. But I got through it!!

@hangdog7094 Жыл бұрын

they are much more difficult than the model he did in this video. 3 springs and they are super strong.

@GranpaRAD 10 күн бұрын

Thanks, I wish I had watched this yesterday. I haven't done drum breaks in decades. My Tacoma now needs me to adjust the shoes out more, and I already took a shower. So that's what the little plug is for!! LOL

@javig5045 29 күн бұрын

Love your subtle humor, Mr. car car nut....Javi G.

@artvance8251 Жыл бұрын

I was taught on orientation of brake shoes,, tall boys to the back and short boys to the front of the class. Maybe kind of dumb but I never made that silly mistake. Taught a lot of young techs this over 45 years.

@inshallah4280 Жыл бұрын

Hell naw bro! This is so helpful to me. Appreciate you

@j.gtheautotech8455 3 ай бұрын

Primary and secondary shoe. Quick google search for picture. But yes primary/ leading shoe is smaller and goes to the front of vehicle.

@mjs7100 Жыл бұрын

You Sir are the Bob Ross of car repair videos. Thank you for an in depth explanation of one of life's mysteries - the drum brake job.

@d1bergman Жыл бұрын

Again, this is exactly the kind of video for Toyota I want to see you doing. I'm always interested in any kind of special treatment which applies to Toyota vehicles. I have a Camry 2018 and Corolla 2017 which btw has the drum brakes in the back and have learned that the adjustment hole is in the front not the back like on most of the other cars I've done in the past. This is a wonderful idea. Make adjusting them so much easier and safer. Please do more videos like this for other areas of maintenance and or repair of Toyota products. thanks

@johndesaavedra1040 Жыл бұрын

I'm 69 and all my cars up until 1977 had drum brakes. I did work on other peoples' cars with disc brakes but I had a steady diet of drums for 30 years. The rear drum brakes on my first (1991) Camry went 200K and only wore out because of leaking cylinders. I did use OEM shoes because they were competitive with AM. Ahmed, I am glad to know that I was taught correctly 55 years ago.

@callmebackfriday2 Жыл бұрын

I did drum brake shoes before and it is quite difficult. I made all the mistakes you mentioned on this video. (push too much and cylinder brake fluid leaking). I learned a lot of tricks on this video. Best instruction and explanation. Every time I work on drum brakes, I always wonder how much car manufacture can save instead of using disc brakes which is much easier and have much better stopping power. Thanks for the video and thank you for sharing your knowledge. 👍

@CrimeVid 7 ай бұрын

Did you put those short crossheads back in again ? or do Toyota’s not use them ? Oi ! maybe you re-cut a lot of drums badly, hein ?

@ianbutler1983 Жыл бұрын

Great video, thanks. I use needle-nose vise-grips to remove the springs. I find I can control them better and keep control with them.

@riceburner4747 Жыл бұрын

Me TOO!

@MattExzy Жыл бұрын

Woa, that strut!! Rustyland never ceases to amaze me... I live in a country where the roads never get salted and there's generally no snow etc in most of it, things like that always just make me gasp. Can't wait to see the struts done, wowsers.

@thetechlibrarian Жыл бұрын

Yeah you’re so lucky. It’s honestly enough to make me want to move. I mean you go and buy a brand new car that’s expensive as ever and you might get a good 10 years out of it but you just know if you live somewhere where there wasn’t saw you might be able to double it.

@tercelfish00 Жыл бұрын

These tutorials are my favorite videos you do. Thank you thank you!!!!!

@elidaniel9568 Ай бұрын

Love your "how to" videos. Please give us more of them. They not only teach how to do something, but how the mechanizem works, and that's wonderful!

@ryanmccoy1612 Жыл бұрын

I absolutely love your channel. As a Toyota owner that maintains his own vehicles as much as I can your channel is invaluable. Sometimes I wonder if you have read my mind or maybe divine intervention. Poof a video that totally answers my questions about the transmission fluid change on my Tundra. Now a Camry rear drum video. I have an 05 Camry that I have been putting off putting rear brakes on. Thank you. The only channel for Toyota lovers in my opinion

@tsukki_amv2848 Жыл бұрын

Great video with a lot of practical tips. I have a 2007 Toyota Sienna (original owner) with 132,000 miles with original rear drum brakes. I have had the parts for a year and I think now I am ready to try this out. My neighbor across the street helped his son change his drum brakes last weekend. He said he would help me with my brakes but when I informed them that the rear brakes are drum, he promptly changed his mind.

@mod_incllc3235 Жыл бұрын

The best Drum Brake tutorial I've seen on KZfaq! And I've watched many of them!

@emilerossouw8837 Жыл бұрын

This man is the reason I'm not selling my yaris. Thank you for the in depth videos kind sir. So nice to see someone proud of their work and never cutting corners . I hope other mechanics see these videos and workmanship

@chucksw1 Жыл бұрын

I don't even have drum breaks but I enjoyed watching you do this!😊

@Bgkim1113 Жыл бұрын

Thank you very much!! you guy is very educational instructor. I am a retired shop owner ASE master thirteen years ago. your detail explain is one of the best those on youtube video

@DdDd-ss3ms Жыл бұрын

I needed your upload decades ago when as student I wrestled with the 4 drum brakes of my MINIs (with the springs actually)🤣

@CountryFarmBoyUSA Жыл бұрын

WOW! I live in the rust belt and have never seen a rear strut that bad. Another great video for the DIYer. I'm 60 and my first car, a 1970 Galaxy 500 had 4 way drum brakes and most of my cars until the late 90's had rear drum brakes. My current cars are 2003 - 2005 Vibes and they still have rear drum brakes.

@danielforrest3871 Жыл бұрын

I hope that your shop thrives. You really are an old school, awesome dude.

@Harry1s Жыл бұрын

Thank you for this detailed instructions!!

@sheerwillsurvival2064 Жыл бұрын

Still have my snap on brake tool set the pliers were the best had spring tools on the ends of the pliers. Bought them in 1975 working at a GM dealership. Good memories

@mervwhitney7229 Жыл бұрын

Another excellent tutorial video. I have done the brake shoe replacement job many times in my DIY driving career, with older cars, many years ago. It is not easy when lying or kneeling on the ground! A 'lift' makes everything so much more accessible. Your customers are fortunate to have you..

@justliberty4072 Жыл бұрын

I recommend you get a stool from "HF"; even a little step stool or an upside down 5-gallon bucket is great to sit on rather than kneeling. At least if you destroyed your knees with basketball and running...

@mervwhitney7229 Жыл бұрын

@@justliberty4072 Thank you for the suggestion.. We have Screwfix in the UK where I obtained some Trade Gel filled knee pads, held by velcro straps. They work as a cushion for the knees, as well as roll of carpet underlay or an old pillow. Unfortunately, at 6'4", a stool or bucket are far too low. At my age I would never get up again! The joys of getting old!

@jacklo325 Жыл бұрын

Man, I remember changing shoes on my paseo years ago. You made it looks so easy, while I struggled. The pro vs. weekend warrior...😅

@aldomassa7473 Жыл бұрын

OUTSTANDING as always ! The advice and counsel were even better portions of the video. After so many great videos and perhaps finding more and more reasons to just purchase OEM, it lasted thing long…. Why not go back to the same. Toyota parts = Toyota happy. God bless and be well. 😊

@jafopt Жыл бұрын

Your videos are great. The presentation from beginning to end is as if you’re teaching an automotive repair class.

@Len10293 Жыл бұрын

AMD another very informative video! It’s so hard to find a mechanic of your honesty and professionalism

@PH-md8xp Жыл бұрын

Excellent video. Just one tip, take a couple photographs of the shoes and springs setup after you get the drum off and before you start disassembling the springs, shoes, and clips- so that you have a quick and easily accessible reference for reassembly.

@mojo4376 Жыл бұрын

Thanks for all your great videos. If you were close to me, I’d definitely use your services.

@Derekolson0 Жыл бұрын

Great video Thankyou! I am sure I know how I messed my drum breaks up so bad the first time I did them now. 😂

@davidparker9676 Жыл бұрын

Drum brakes are no fun to replace. This was a pretty good tutorial video. The one thing I'd do differently is all of the cleaning, sanding and lubing BEFORE assembling new parts. I agree to adjust the shoes with initial drag, it will wear in perfectly if you do that. Make sure both sides are adjusted the same so they grab at the same time.

@jsims2985 8 ай бұрын

A man after my own heart. Spot on, brother.

@LorenaPoston-tq7vs 9 ай бұрын

I'm a lady and I' will do my rear drum brakes myself, and so far your tutorial was the best!!! Thanks

@HouseCallAutoRepair Жыл бұрын

I always recommend applying the brake a few times during the adjustment processes to get the correct feel.

@cenccenc946 Жыл бұрын

From this video I learned I have those drum breaks on my 2002 Hilux pickup I just got, and I am going to totally DIY the payment to my mechanic to replace them. 😆

@glennfields8121 Жыл бұрын

AMD, you make great videos and provide tips and educate us. Thank you for doing this. You do this by choice and it is appreciated.

@azizbass Жыл бұрын

It looks like you may have changed your camera because the image quality has improved a lot in your lot of your videos recently, and the hissing sound is gone from the microphone. When you were working on the bench, an overhead angle would have been amazing, BIG THANKS and for your fantastic videos. May the Lord bless you and your family/team. Live long and prosper you're a living legend, sir.

@ThunderbirdRocket Жыл бұрын

So thorough and explained the information in simple language ! Thanks !

@gregsantos9731 Жыл бұрын

Very well shown and presented, thank you very much bro, how can i live with my car without you.

@eds8780 3 ай бұрын

Thank you for making this video. I love how you broke it down step by step and articulate it for us novice folk to understand. Great video!

@stevejette2329 Жыл бұрын

So often, KZfaqrs know their subject but not videography. Lighting, cameras, sound, script, etc. This one has great video techniques.

@tardeliesmagic Жыл бұрын

A mechanic told/showed me many years ago to rub the edges off the shoes & to lightly sand the surface too. I've never done the job myself EVER,too risky for me lol Great advice Amd as always....i'm just not good with fiddly things.

@ivanbg5167 Жыл бұрын

At the shop I work at, we like using high leverage pliers to grab the spring, such as snap on HL138ACP.

@coloradoboo1071 Жыл бұрын

Very much appreciated!! I have a few Toyotas with drums that will need replacing at some point (if it ain’t broke don’t fix it!) We are still waiting for your engine bay cleaning on your Camry!!) 😅

@BigSlickRick75 Жыл бұрын

Great video! Little things you've covered that I've never done before 😂! Love the videos!

@ronchappel4812 Жыл бұрын

26:12 ***Solid gold advice***! I've needed that backup plan a few times😆 For anyone that's curious about leading versus trailing shoes,here's a quick explainer. The leading shoe gets the most wear because the rotating forces help pull it tighter against the drum- which gives a stronger braking effect.The trailing shoe doesnt have this advantage. So why not make both shoes the leading type? Early race cars did exactly this and it works well. However this has one disadvantage. When a car is going backwards the leading shoe(s) become trailing shoes and lose most of their braking ability.And because road going car's E brakes need to work equally well in both directions, they have the leading/trailing arrangement.

@danny.choi. Жыл бұрын

AMD you are an ethical and responsible super star mechanic like the one called Mike Holme in building industry, you inspired me! 👍

@silk7519 Жыл бұрын

Glad I have brake pads all around 😆. Excellent video.

@Maplecook Жыл бұрын

THANK YOU for posting this!

@greganderson2335 Жыл бұрын

Very nice as usual. The great thing about current times is that you can now take tons of pictures with your phone to insure you know the original position of all the parts We old guys remember when you just had to guess or check the other side.

@riceburner4747 Жыл бұрын

Most of my cars had TWO upper springs. And when I first started, I'd lay parts on a flat piece of cardboard the way I took them off.

@jh1319 7 ай бұрын

Have watched a lot of DIY on drum brakes, but yours is the best, sir. Well done.

@uaart1 Жыл бұрын

This was EXACTLY what I needed for my ‘05 Sienna. Had a noise only backing up after the new shoes and hardware were installed. I needed to roll the edges of the shoes? Who knew? And I’ve been doing drum brakes on my GM cars and older Hondas for 40 years! Everything else he did is gospel. Side cutter method? Um, ok. I had been using a special tool to hold the spring end that never really worked. Some of the older Toyotas used front access adjustment holes? I wish I had that feature !! 7:04

@yunieskerjoseespinosamarre1174 Жыл бұрын

My friend, thank you!!! Always impressive your lessons. Done this job in my car before. Once said this, there is always a new good tip from you 👍. Blessings 🙏

@LAactor Жыл бұрын

Two things people should note. See how much his arm shakes by frame and just off camera? That's a pro master tech doing it. Your first time won't look as easy These are a pain to do because of the amount of tension those springs fight you with. But take your time and stay focused and you can do it. And if you look closely you see how the springs want to take his glove with them? Or how his gloves are ripped in between cuts? Expect your gloves to be ripped ten times that. Have extra on hand to protect your own skin. Lot of good information on this video I wish I was able to see when I started. Good trick with the white lithium. I always painted it beforehand.

@LAactor Жыл бұрын

And you can find all kinds of painter or electro coated rotors and drums now. Including those made specifically for rustyland

@Digidoc316 Жыл бұрын

In my experiences with drums, all reusable parts get thoroughly wire brushed clean, washed off with brake cleaner; including the face of the axle, the wheel studs, the adjuster, and the hub face. When assembling the new shoes, lubricate all rub points like the parking brake hinge point and the bosses on the backing plate. I would put both shoes on with the hold-down hardware, put a ratchet binder around the shoes and tighten it to keep compression on the wheel cylinder. Then, I could install all the return springs and remove the ratchet strap. If the vehicle was equipped with steel wheels (rare these days), I would paint the hub face and the drum face LIGHTLY with anti-seize to prevent the wheels from rusting onto the drum or the drum to the axle. When adjusting the brakes, I would run them down tight, and then stick a screwdriver in to hold the adjuster off the star wheel and back off 1/2 to 1 complete turn. Typically, this centered the shoes and left minimal space between the drum and the shoes. That is one crappy strut!!

@mvtroiano 5 ай бұрын

I have watched 100 brake install video's over the years. No one else said to turn the self adjuster all the way back down. That makes complete sense! I like your style of explaining things and just subscribed!

@7fpsmarvin Жыл бұрын

Man this has never been my go-to I’ve always paid someone else to do this for me but following you for a minute now and I’m going to shoot my shot 👌🏻

@7thplanet121 Жыл бұрын

I made a hook with a welding rod. Removed the flux and made a small hook on one end and on the other I bent it to be comfortable for the hand. Works great for removing and fitting springs.

@kens97sto171 Жыл бұрын

Great video.. nice clear steps. I like how you put the parts on the table side by side, keeping everything organized. I need to start doing that. Its easy to get stuff turned around or backwards. Taking pics helps too. On the adjustment part. I have added a step, get the brakes adjusted to whatever you like. I then get in the car and apply and disengage the parking brake several times. Then go back and adjust the brakes again.. normally you will find they are loose again. The parking brake will press the shoes tightly against the drum and center them nicely. I have found repeating the parking brake step 2 -3 times, and you will get to a point where there is no longer any change after you do it. Now the Brakes are centered, and adjusted nice.

@denniskubai 2 ай бұрын

One of the best clips I have have watched on DIY tutorial. So straight to the point, excellent explanation, excellent display of the steps. Infact, I have not seen anything done outside the face of the camera like in some tutorials. God bless you abundantly sir.

@edulloa7958 Жыл бұрын

Well done job explaining the process of changing the drum brakes,God bless you for sharing your knowledge.

@vetteboy1024 Жыл бұрын

One of my most frustrating cars to replace the drum brakes was a late 90’s Tercel.

@karotte29 7 ай бұрын

Thank you that video boosted my confidence in tackling my Tacoma!!!!!

@dandan3643 Жыл бұрын

I'm shocked at the amount of rust you have to deal with. I don't know what state your in but I'm in Florida by the ocean and you would think our cars would be caked in rust but it's the opposite of what you get there. I love the channel. You speak so well.

@underscr0e Жыл бұрын

Toyota sure loved to hold onto those rear drum brakes for a long time!

@Blakecryderman7244 Жыл бұрын

@underscr0e well these cars don’t weigh much and front brakes do more work stopping the car then the rear brakes do. But all drum brakes including front on the old 50’s boat cars that weighed 5000 pounds that’s a different story, drum brakes are fine on lighter cars that don’t take much to stop vs the old boats, like a 55 bel air the drum brakes aren’t great because it’s a heavy car, a lot different then a lighter Toyota car of today.

@jfan4reva Ай бұрын

Honda too! (2015 Civic LX - drum rear brakes)

@PeteBasel 5 ай бұрын

Drum brakes are such a pain in the butt with all the springs and do dads, hate them everytime I do them. Even took pictures before to see where things went. NICE job and thanks for explaining so clearly! I often find things rusted solid, lots of PB Blaster, and brake grease to clean them up.

@michaelfishman7174 6 ай бұрын

Beautifully explained. I have never seen a video that explains this so clearly. Thank you for sharing this with us.

@romeokabatay4655 6 ай бұрын

Extremely thorough and highly informative. After watching this, even a non- DYI person should be able to service a drum brake. Thank you, very much. I always enjoy your excellent presentation.

@Rick_Kn Жыл бұрын

I use a large wood clamp to hold the shoes together when I install the last keeper and spring. I'm also wondering what aftermarket parts you find acceptable? Some are good and some not so good. You do this everyday and I and others would GREATLY value your opinion. Thanks!

@peterchang4601 9 ай бұрын

Thank you so much for your insightful instructions! It's always great to watch you work and to learn from you! You made this difficult job easy because your method is a lot better and smarter than some other videos I've seen. You are the best!

@joseleysa5137 Жыл бұрын

Wonderful step by step instructions and very clean work indeed. That is why i enjoy watching your videos... Keep it up Care Nut!

@richardprokopczyk9255 Жыл бұрын

you are completely 100% correct about doing one side at a time , drum brakes confuse more backyard mechanics than any thing on the car,thank you CCN for your videos! LATER GATOR

@slimshady6359 2 ай бұрын

I have to take a million pictures with my cell phone to refer to as I'm reassembling parts like brake springs. However , I haven't done it for as long as you have so you make it look so easy .. Thank you for making these videos..

@Ocean_breezes 2 ай бұрын

I could relate. Just did rear drums and shoes on my 2006 Tundra. What a learning experience. It's actually easy to reassemble if you take careful detailed notes on spring and adjuster placement

@stackthatartpaper Жыл бұрын

I bookmarked this video so I can watch it when I have to replace my new Tacoma’s in 17-20 years

@jzb8380 Жыл бұрын

Thanks so much for this video! I was just about to tackle this job on our 2005 Camry.

@KP-uj1wf Жыл бұрын

Thanks for another great video. Would it be possible to do a similar video, but on 'servicing disc brakes'? Thanks!

@tdcm666 Ай бұрын

He also made a video "How To Replace Your Toyota Brakes Part 1 and Part 2" where he replaces the disc brakes

@rickj1983 9 ай бұрын

I would be more than happy to relinquish my weekend mechanic work to let you take over everything if you simply moved to CO. Your attention to detail is phenomenal.

@ppeterson9359 9 ай бұрын

Sure wish you were closer than 1/2 a country away! After two visits and $800 spent at a professional shop I offered to fix my sister-in-law’s low brake pedal on her ‘06 Camry. I suspected the rear brakes weren’t self adjusting. Sure enough, the previous shop hadn’t even lined up the adjustment hole in the drum w/ the hub. The star wheels were totally seized up. Love the channel!

@Larry-Hi Жыл бұрын

Made my day in light of the kaos going on in our Nation and World. Love your videos. Thank you Car Care Nut. God bless, aloha!

@LAactor Жыл бұрын

Larry Yo we have such chaos in the agenda that our leaders are concerned over that other world leaders are abandoning the US dollar. India will use other currency to trade their rupees. China and Russia just brokered a deal to do the same. Our world here is being ruined. We will be refugees in 20-30 years if this keeps going. Our country has fallen.

@MarzNet256 Жыл бұрын

Excellent. I have a 2006 Matrix with almost 209k miles and original drums. The car stops perfect with zero noise. I recently tried to do an inspection and used the bolts to break the drum free but it hung up on the pads trying to remove it. I just pushed it back on, realizing that I should have new parts on hand.

@montestu5502 Жыл бұрын

There is probably a ridge on the drum so you will need to turn the adjustment mechanism in to pull the shoes in so you can get over the ridge. You turn it the opposite direction that AMD was doing in this video. You do need to hold up the adjusting lever with another screwdriver so you can turn it backwards.

@MarzNet256 Жыл бұрын

@@montestu5502 Yes. I know this trick but did not want to mess with it until I had all new parts.

@michaelhaile401 Жыл бұрын

This is something important AMD should’ve talked about but he didn’t. The shoes will wear the inside of the drum creating a ridge at the end that will trap the shoes. If you try to force the drum off through the bolt holes, you can end up breaking hardware. Now you have to replace almost everything. This happened to me actually. The proper way is to remove the rubber grommet and adjust the shoes inwards to allow for enough room to let the drum slide off. Most Toyotas have this on the back which can create a tough access for somebody to see behind the wheel.

@user-em8mf4bi4l 9 ай бұрын

Μονο Toyota. Καλύτερη εταιρία που σκέφτεται τον τεχνικό

@jegerm6752 7 ай бұрын

Great video. Just replaced my brake shoes today. It wasnt that hard, thanks to this video but my god, I hated doing it so much. Between all the springs, the need to clean all the caked brake dust, and the need to adjust them afterwards, it took me more than 2 hours. Having specific tools wouldve made the job so much easier, and my drum doesnt have the hole in the front for adjustment. Luckily drum brakes last so much longer, so I may not have to do another one for at least 7 years if the car is not sold yet by then. Disc brakes are so much easier to work on, and the pads are much cheaper than drum brake shoes.

@panagiotisharos9625 Жыл бұрын

Congratulations... excellent... regards from Athens Greece...

@davidrouleau3289 Жыл бұрын

I've never really like those hold down spring removal tool my go to instead has always been long nose vise grip, it hold the spring and the plate and it work on all cars

@icosthop9998 Жыл бұрын

Nice

@olavi_liikanen 5 ай бұрын

Wow! This was very uselful video for me, thank you! I did watch this before i replaced my 1993 Corolla's rear drum brakes. Car has been driven 124 598 km/77421 miles currently.

@Motorsportsgeek Жыл бұрын

Quick light layer of clear coat on the drums will keep them clean for a long time if you are in the rust belt.

@jonjon5692 2 ай бұрын

Great video! I want to note that the 2002-2006 model which is what this camry is has 2 different types of rear brake rotors and shoes. This Camry and parts in this video is the Camrys made in Japan. The USA made Camrys have differs parts.

@timklein3962 5 ай бұрын

At only 200;000 miles this car has a long way to go; but to each their own; good video and great work here !! Thanks !!!

@alexzee4564 Жыл бұрын

My most favorite thing to do in the world.......

@keefeD146 Жыл бұрын

?, playing w your ol' bamboo shtick? 🧴

@chuckwalla2967 Жыл бұрын

Not!

@coloradoboo1071 Жыл бұрын

I agree and I’m SO thankful when I don’t have to redo/tweak brakes after spending a long time replacing them. (I’m about 80% successful so far!)

@riceburner4747 Жыл бұрын

🙄 dont miss at all

@joseeduardo4327 Жыл бұрын

Nobody believes me when I say my ‘22 Tacoma has rear drums lmao

@adilakhtarghani6848 4 ай бұрын

I am glad it has to be replaced every 15 years . I did mine yesterday morning and putting that cable was the only issue I faced. Rest was easy. Btw I use locking plier to pinch the brake line it made job easy with the cylinder.

@sofjanmustopoh7232 Жыл бұрын

In the 90’s I have no money and have to maintain my own Camry and other family Camry. I did about the same thing but thru trial and error and old mechanic advice 😅. Thank you for the memories . Now I still change my own brake . But it is all disc brake now . I love that part about making sure the auto adjuster goes click click . Otherwise in about 1 month the brake would be out of adjustment. And car would dive and lock up the front wheel because the rear brake is too loose and does not brake

@brianzachary5618 11 ай бұрын

I put new drums and shoes on my 2003 Tundra a couple of weeks ago. I watched some other videos that helped a lot. The lithium grease and sanding the ends of the shoes are two tips I picked up.

@avsfan291 7 ай бұрын

I've watched my share of DIY car video's and this one is the cleanest one I've seen. Nice job.

@MrNICOYA2009 11 ай бұрын

I’d like to thank you a lot for this video helped me to replace rear breaks on my corolla ‘11. My ugly fight was with installing the adjuster spring, at the end used an small flat screwdriver to do it. Four hours but saved me almost a grand.

@garymoon2829 5 ай бұрын

Thank you AMD, this was extremely helpful. ! I've done a few drum brake jobs on my cars, having had no particular instruction. I definitely learned good techniques from your video, and feel sure now that the next time will be easier, faster, and less stressful. Thanks!

@Monroe1516 5 ай бұрын

after the initial ajustment ,, i like to pull the hand brake on & off a few times with both drums on to center the shoes . Then go back and recheck the ajustment on both brakes,, thanks for the great video.