How to change front shock absorbers TOYOTA YARIS XP9 TUTORIAL

How to change front shock absorbers TOYOTA YARIS XP9 TUTORIAL | AUTODOC

Рет қаралды 42,384

autodoc.co.uk

7 жыл бұрын

How to change / change / install / replacement front shock absorbers on TOYOTA YARIS XP9 TUTORIAL | AUTODOC
Top brands that produce shock absorbers: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
On our website you will find a wide range of auto parts you are interested in: goo.gl/iCHSNq
Shock absorbers: goo.gl/DJD6DM
Shock absorbers for TOYOTA: goo.gl/xRGkjA
Shock absorbers for TOYOTA YARIS XP9: goo.gl/2ScFBU
TOYOTA Car parts: goo.gl/tH7Dem
01:00 - Use an end bit №6 and a combination spanner №17
01:33 - Use a socket №14
02:11 - Use a socket №19 and a combination spanner №19
03:12 - Use a hex-nut wrench №6 and a combination spanner №17
03:51 - Use a special device to take the spring out
04:18 - Use a socket №17
05:18 - Before installing a new shock absorber it is strongly recommended to pump it over for 3-5 times manually
Have a look at other videos on our channel:
►TOYOTA YARIS XP9 car repair - • TOYOTA YARIS XP9 car r...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZfaq: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

Пікірлер: 29

@grahamwishart4832 7 жыл бұрын

Good video but shouldn't use impact gun to tighten top nut on shock absorber on assembly.... can damage piston seals on new shock absorber

@makeit.primetime99 4 жыл бұрын

2x speed for all these videos makes them better

@joesaric1 3 жыл бұрын

hahahahha good idea !

@dividabledatas8145 4 жыл бұрын

Thanks for the vid, I don't need to replace them it's that the top part of the shock absorber on the passenger side came off and I hope I can put it back in it's place

@ax4178 3 жыл бұрын

They make it look so easy.

@robertdowney9482 6 жыл бұрын

Thanks for the video im confident enough to do it in my yaris

@autodocuk 6 жыл бұрын

Thank you for the feedback! It’s great to know that our video was useful! Follow our upcoming updates. Best regards, Autodoc.

@alanhartley173 5 жыл бұрын

Awesome video, to the point, no bullshit. Love your videos.

@autodocuk 5 жыл бұрын

Thank you for the feedback! We are grateful that you appreciate our media! To see more interesting content stay tuned. Best Regards, Autodoc.

@Vanadeo 4 жыл бұрын

Did my droplinks the otherday, turns out it was 19mm socket but the 6mm allan socket was true.

@Marco-lh9mr 3 ай бұрын

Should we tighten again top part after car is on ground?????? It became loose after i put in on ground and there is space between frame and black plastic tampon part

@autodocuk 3 ай бұрын

You can find this information in the technical documentation for car repairs.

@hapietv3076 3 жыл бұрын

sir i have i problem on my yaris 2008 model the power steering sometimes its hard to turn. do you know what is the problem?

@autodocuk 3 жыл бұрын

Thank you for your comment! In your case only the diagnostics will help. Basically, the affliction in this YARIS model is with the control unit in the electric power steering. We highly recommend you use a professional car workshop to have a close look into this issue and locate the faulty part. Stay tuned and follow our latest updates! Best regards, Autodoc Team.

@sparemotorpartsbd5523 4 жыл бұрын

Nice video

@autodocuk 4 жыл бұрын

Thank you for your feedback! We hope you will like our upcoming videos too. Please stay tuned with us for more tutorials. Best Regards, Autodoc Team.

@sparemotorpartsbd5523 4 жыл бұрын

@@autodocuk Obviously

@wangdangle73 Жыл бұрын

How do u get cap off top strut

@autodocuk Жыл бұрын

You can see it starting at 3:10 minutes.

@JosePerez-ug4ue 3 жыл бұрын

When you mentioned hex-nut wrench Not is that 6mm?

@autodocuk 3 жыл бұрын

Please specify the time of the fragment in the video in which you are interested in the instrument. AUTODOC

@JosePerez-ug4ue 3 жыл бұрын

@@autodocuk at 3:12. No6* is it 6mm?

@farmerdave7965 6 жыл бұрын

No safety glasses ?

@autodocuk 6 жыл бұрын

Thank you for your feedback! Unfortunately, we have made a mistake of not using of one of the main protection methods. Best regards, Autodoc.

@86virtu 9 ай бұрын

you must be american

@theturinwe1474 5 жыл бұрын

great video. he does one side in 12 minutes about. suppose that means it'll be about 40 a side for me. LUL

@autodocuk 5 жыл бұрын

Thank you for the feedback! Unfortunately, each car requires its particular replacement and everything depends on a technical condition of a car parts units. We try to show the process itself and the replacement sequence. Best regards, Autodoc.