How to change fuel filter on Audi A6 Diesel 2016

Рет қаралды 21,768

Күн бұрын

Mr Bhaisaab used to be the name of my channel when this video was uploaded.
How to change diesel filter on Audi A6 2.0tdi 2014-2018
Disclaimer:
All mechanical and electrical work
should only be carried out by
Professional people only.
This video should only be used as
guidance and not as an absolute-guide.
If you don’t know what you are doing,
DONT carry out this work.
By watching this video you accept that
any damage you incur to vehicle,
yourself or anyone around you
is solely 100% your fault.
You have been warned.
I recently started this channel. if you like the content then please like and subscribe. ill need as much subs as possible in order to continue. Thanks.
HotStone Media

Пікірлер: 19

@sorinmedrea4201 2 жыл бұрын

Thanks for you video!!👍

@ryanh3285 Жыл бұрын

Definitely best to prime the filter and pump before starting with vcds ,obd eleven or manually but good video

@Cll859 11 ай бұрын

Do bmw f10 have automatic bleeding ? On and Off ignition after replacing

@louiswitt1019 2 жыл бұрын

Did you have a operating condition or sputtering that required the filter change?

@hotstonemedia376 2 жыл бұрын

Fuel filter is a service part that you suppose to replace as maintenance. Best to replace it once every 2-3 years in order to keep the fuel system clean if your here in the UK. If your in other countries where the fuel is not as clean then you may have to replace it more often.

@louiswitt1019 2 жыл бұрын

@@hotstonemedia376 Thank you for the reply!

@saltyorange100 2 ай бұрын

Do you need to close a valve for the fuel anywhere? Or does it not drain the fuel tank when you remove the filter?

@hotstonemedia376 2 ай бұрын

As long as everything is switched off and the key is not in the ignition or engine is not running then the tank won't drain out.

@peterchajewski8065 2 жыл бұрын

You dont need to bleed the fuel system? It automaticly?

@hotstonemedia376 2 жыл бұрын

Yes. The lift pump will pump the fuel for 3 seconds as soon as you turn on the ignition and will continue to pump while the engine is running.

@petricfabian3684 Жыл бұрын

Hey, i have an audi a4 b8 2011 how do i know my car have an automatic pump ?

@hotstonemedia376 Жыл бұрын

You should be able to hear the sound of fuel flow in the filter for few seconds when the ignition is switched on and engine is not running.

@66Pipes66 2 жыл бұрын

This is wrong. You must bleed the system or you could damage the high pressure fuel pump because you ran it dry.

@hotstonemedia376 2 жыл бұрын

Your comment applies to vehicles that don't have a lift pump. This vehicle has a lft pump in the fuel tank.

@A1948C 3 ай бұрын

Use hose clamp pliers on hose and use vcds to take the air out of the filter and just then fit the filter and take the clamps out of the tubes. That's so wrong how you did it...

@davidredmond1982000 Жыл бұрын

100% wrong, took a big chance without bleeding the fuel system, just because time car started doesn't mean you won't do damage, high pressure pump run dry is a costly mistake

@hotstonemedia376 Жыл бұрын

You are 100% right when it comes to vehicles without automatic bleeding. You are 100% right about causing damage to high pressure pump if run dry this is why you have to prime the system by turning the ignition on & off before starting the engine on vehicles with automatic bleeding. And this vehicle has automatic bleeding. Therefore you have 100% wrong ly misunderstood the video and all the previous messages.

@IIIIIIPETEIIIIII 5 ай бұрын

@@hotstonemedia376so by cycling the ignition key, the system automatically primes? How many times do you need to do this to refill the system and purge all of the air?