How to change KTM300 Coolant | On Two Wheels
Рет қаралды 13,354
Күн бұрынThis is a quick guide on how I changed the coolant on my KTM 300.
I had made a bit of a boo-boo while topping up coolant. I mixed colours, which is a no-no! So I decided to do a full flush and put in some fresh engine ice!
Facebook: / ontwowheelsau
KZfaq: / @ontwowheels
#howTo #KTM #300 #coolant #change #flush
#ADVBike #adventureRiding #Adventurebike #EnduroRiding #EnduroBike #OnTwoWheelsAU #onTwoWheels #australia #victoria #melbourne
@ShawnBlais Жыл бұрын
FYI The manual says to elevate the front of the bike 30" to properly bleed it
@isaacwest7451 Жыл бұрын
So helpful make more videos for KTM300!!
@Forged721 Жыл бұрын
Kool mate Thank you for this 👍👍👍
@peteuncle2935 10 ай бұрын
I'm wondering if you are still out there kicking it, trying to get it to start? Where was the sparkplug replacement and start video? You will want to top up coolant after running the bike and letting it cool too.
@dmorgan3244 2 жыл бұрын
I think you are supposed to start the bike after filling, with the cap off, to let the air out.
@aarongrey557 Жыл бұрын
Haha note too self. Take the radiator cap off after removing the drain bolt to avoid getting drenched with coolant 😅
@justinlynn2264 2 жыл бұрын
How’s your bike running? Did the spark plug change get it going again?
@stevenbenson6370 2 жыл бұрын
🤣 P r o m o S M!!
@OnTwoWheels 2 жыл бұрын
Thanks I guess :)
Highland Cycles
Рет қаралды 6 М.
ABRACADABRA TV
Рет қаралды 2 МЛН