How to change pollen filter on FORD FOCUS MK2 [TUTORIAL AUTODOC]

No video

How to change pollen filter on FORD FOCUS MK2 [TUTORIAL AUTODOC]

Рет қаралды 72,074

autodoc.co.uk

Күн бұрын

How to change pollen filter / cabin filter on FORD FOCUS 2 (DA) 1.6 Saloon 2005-2012 [TUTORIAL AUTODOC]
Pollen filter on FORD FOCUS C-Max (10.2003-03.2007) / VOLVO C30 (10.2006-12.2012) / VOLVO S40 II (MS) (04.2004-12.2012) / VOLVO V50 (MW) (04.2004-12.2012) / FORD FOCUS Mk2 Cabrio (DB3) (10.2006-09.2010) cars should be changed, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
All video and PDF tutorials on FORD FOCUS 2 parts changement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/fo...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Pollen filter: www.autodoc.co.uk/car-parts/a...
Pollen filter for FORD FOCUS 2: www.autodoc.co.uk/car-parts/a...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts changement ➜ kzfaq.info?s...
0:00 - FORD FOCUS MK2 - interior air filters / cabin filter: step-by-step replacement tutorial
0:27 - Unscrew the fasteners of the side plastic trim panel.
1:04 - Detach the accelerator pedal connector.
1:51 - Remove the cabin filter housing cover.
2:33 - Reinstall the cabin filter housing cover.
3:13 - Install the side plastic panel.
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► FORD car repair tutorial - • FORD car repair tutori...
► FORD FOCUS 2 car repair tutorial - • FORD FOCUS MK2 car rep...
► How to change front brake discs / front brake rotors on FORD FOCUS 2 (DA) - • How to change front br...
► How to change front anti roll bar link / front drop link on FORD FOCUS 2 (DA) - • How to change front an...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZfaq: / autodocuk
Instagram: / autodoc_autoparts
TikTok: / autodoc.eu
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2020 AUTODOC GmbH All rights reserved

Пікірлер: 52

@marko_._ 3 жыл бұрын

Focus is a great car, but god save us from the neanderthals who designed this filter location

@autodocuk 3 жыл бұрын

Thank you for sharing your opinion!

@Collapsion Жыл бұрын

Thank you for this great tutorial! it was really helpful. When I changed the filter, I was sitting on the passenger side. I just bent over to the driver's side. It was a reasonably comfortable position, so it was actually way easier job than I expected. I also didn't remove the side plastic trim panel and did not disconnect the accelerator pedal connector.

@autodocuk Жыл бұрын

Thank you for sharing your story with us!

@ahikambenyosef1822 7 күн бұрын

Thanks very helpful

@garantservisstroy 2 жыл бұрын

Great, everything is clear. Thank you!

@alecxpro2071 2 жыл бұрын

Nice info. Thanks

@rayrivera1830 Ай бұрын

Managed to do this by just screwing the filter cover off. Very tight space! The pedal connector was stuck so it was the only way (connector came off easily the first time I tried it, but I put it back on and then it got stuck).

@ethernalsoul Жыл бұрын

I have a 2006 and a 2010 model - changed the filter in both... it's a pain...they could have put the access to the filter on the passenger side, or in the glovebox, or even behind the stereo...

@brianfearn4246 Жыл бұрын

On the right hand drive version the pollen filter is on the passenger side but still a pain, you have to completely remove the fuse box & bracket to gain access to the cover.

@bernardosilva7069 2 жыл бұрын

Thank you!!!!

@alexey9900 3 жыл бұрын

Good 👍👍👍

@mrwilfredmyers7566 2 жыл бұрын

Thats a Young mans job

@FoodOnCrack 2 жыл бұрын

Just did this: flexible filters are easier. You need a DEEP 10mm socket and this goes easiest with a socket wrench to break the bolts and remove with a 1/4 socket screwdriver with deep 10mm socket. A super hard filter can't make the bend around the steering column.

@autodocuk 2 жыл бұрын

Thank you for sharing your experience, it will be very useful information for us and our viewers. AUTODOC

@Lin-vu8vz 3 жыл бұрын

Similar as Nissan, poor thinking designer

@SabriCanbaz 11 ай бұрын

Güzel anlatım teşekkürler yeni filtreyi koymadan içerisinide temizleseydiniz daha güzel olurdu

@stevo091 2 жыл бұрын

Hi good video review, very well explained. Not sure where my pullen filter is. Ford C Max 2011 UK?

@autodocuk 2 жыл бұрын

We recommend that you refer to the technical documentation of your car, which indicates the location of the filter in your car. AUTODOC

@barrythemoth 2 жыл бұрын

Drivers(uk) footwell much easier than this

@Relaxationvideos88 7 ай бұрын

is this the same location for a right hand drive model (on the same side as steering wheel or the passanger side )

@slavkog3113 2 жыл бұрын

In your video at 01:08 you disconnect pedal cable before putting pedal aside and change cabin filter. Haynes manual states that you can do this a maximum of 10 times. I think you should mention this in your video and also can you tell us do they say to disconnect the cable in Ford official Repair Guide? Thanks - This is a quote from Haynes Manual: Disconnect the wiring plug from the throttle position sensor, then unscrew the 3 mounting nuts and remove the pedal/sensor assembly from the bulkhead studs (see illustration). Note that the sensor is not available separately from the pedal assembly. Note: Ford insist that the sensor wiring plug can only be disconnected 10 times before is becomes irreversibly damaged. Use a marker pen to record each disconnection on the side of the connector. Only disconnect the plug if it ís absolutely necessary.

@autodocuk 2 жыл бұрын

Thank you for your valuable clarification, this will be very useful information for our viewers. AUTODOC

@Happiness-lp9fw 2 жыл бұрын

@Slavko_G No. Couldn't find enything like that. ''Haynes manual states'' You state that it states but dont state which one states that and there was nothing to be found on the net. So sounds like bs to me.

@iksseven3193 3 жыл бұрын

The old old filter was putted in wrong way

@autodocuk 3 жыл бұрын

Yes, you are right the old filter was crooked, thank you for your interest in our videos! AUTODOC

@WireSniffer 2 жыл бұрын

Yes I noticed this too, when AutoDoc took the old filter out @1:50s, it was showing 'Air Flow' direction the wrong way. The Air flow should be flowing INTO the car cabin, not towards the engine bay.

@user-uw6ve4pg1o 5 ай бұрын

When they took out the old filter, the stripes were horizontal. And when they installed the new one, the stripes were vertical... So which is correct? The arrow is towards the interior - this is understandable.

@user-uw6ve4pg1o 5 ай бұрын

Is it possible to remove the chip (connector) from the pedal? Maybe then it is necessary to make an adaptation?

@busadam2368 3 жыл бұрын

Hi, Can I re-use the bolts what I take out when I remove the pedal or shall I use new ones when I put it back?

@autodocuk 3 жыл бұрын

The bolts can be reused.

@busadam2368 3 жыл бұрын

@@autodocuk thank you!

@BaharAli9889 3 жыл бұрын

👍👍

@gangsterboi5146 5 ай бұрын

Where is filter located in Ford Focus mk2 2008 auto petrol

@autodocuk 5 ай бұрын

The cabin filter is located in the same place as shown in the video.

@toddsmith1617 3 жыл бұрын

Where is it in a ford focus se 2011?

@autodocuk 3 жыл бұрын

On Ford Focus 3, the filter is under the glove compartment

@popsyoshi7790 3 жыл бұрын

What a bitch of a job. I'm not surprised when I finally got the old pollen filter out it looked like it hadn't ever been changed. Lots of cuts and bruises. I didn't need to disconnect the loom from the gas pedal, just tucked it away behind the brake pedal. And the miniscule screws on the filter housing were a 7mm socket. What is a #8 anyway? Millimetres surely? Otherwise thanks for the explanation and torture hour!

@balaclavaman6301 10 ай бұрын

They are 7mm not 8mm as stated in the video.And a pain to remove and tighten because the heads don´t have any depth so they don´t grip to the socket.

@caskwith 3 жыл бұрын

Such a terrible design on this car. I have the UK version and you need to remove the glove box and fuse panel to gain access and it is still difficult. 45mins-1 hour to complete. Done the same on our other car, a Renault Modus, takes less than 2 minutes.

@woodcock696969 3 жыл бұрын

I’ve got the mk2 and mk3 and the mk2 is the worst pollen filter I’ve ever had to change. The access through the scuttle on the mk1 was bad enough that most garages would refuse to replace them

@SAM-zt2uy 3 жыл бұрын

Damn and there was me thinking it was going to be easier without the pedals in the way.

@caskwith 3 жыл бұрын

@@SAM-zt2uy Afraid not. A long spring type flexible extender for a screwdriver will be really useful for getting at the bolts but it's still a pain of a job. I need to do it this year and really not looking forward to it.

@SAM-zt2uy 3 жыл бұрын

@@caskwith Changed it this afternoon in about 30 mins, I had done the heater fan resistor last month so which is in the same location and definitely worth doing at the same time if it’s never been changed.

@caskwith 3 жыл бұрын

@@SAM-zt2uy You are quicker than me! haha. How much was the resistor? Might just do that job as well then.

@zoltanm6034 2 жыл бұрын

air flow? 1:52 or 2:18

@autodocuk 2 жыл бұрын

Please rephrase or clarify your question and we will be able to assist you. AUTODOC

@zoltanm6034 2 жыл бұрын

@@autodocuk The arrow on the filter! The filter is palaced wrong in the first time. Btw its really a nightmare to fit the filter in one piece. Thats all, thx for the video.

@NorbertCristian28 3 жыл бұрын

worst change ever, i hate fooord !!!

@karolisgrigorjevas8022 3 жыл бұрын

In ford work only idiots i see...😂😂😂

@eddgreen9376 Жыл бұрын

Why are Fords so poorly designed when it comes to maintaining them! You’d think they’d have learned to make them simpler to maintain by now with how unreliable they always used to be! 😂

@autodocuk Жыл бұрын

We do not have such information so that we recommend that you consult your mechanic.