Do they fit you still?

🙏🏼 Thanks for this feedback! Looks like I should restock 😎

@@NeverDenyMe Most definitely. Roller skating blew up in a big way over the past few years. Hopefully, all these newcomers will stick with it for life. If you can get in with some dedicated skate shops and get them to take orders for you, I'm pretty sure your machines would be running non-stop. A post by one or more of the right influencers could change your life. Don't forget about ice skates and roller blades too.

Today's The Day 🙌 Happy Rolling!

Which print do you like best & which skate model do you have? I plan to make more templates soon.

Albeit a small difference...there is one. Depending on your skate and how close the wheel comes to the screws underneath and the kingpin will determine which size you should get. You just want to make sure you have the clearance. I recommend going with the 62mm because chances are that when you loosing your trucks and start turning that your wheels won't rub those screws holding your boot to the truck. I wear a US 12 so I can get away with the 65mm no problem. And since the 65mm's are wider, that means they'll be a bit more stable. Hope that helps.

Ouch...96a is an extremely hard wheel for outdoor skating...unless your skating at a skatepark in a bowl. But since we know you're not quite there yet let's get you some outdoor wheels. Few things to consider... 1) Durometer (hardness): you want to go for a stickier wheel. I'd suggest a 78a. The advantage of this is that because the wheel is super soft it will allow you to roll over twigs and cracks smoothly. It also takes speed out of your skate allowing you to control your movements better while you're learning. 2) Diameter: General rule...the wider the wheel the more stable the ride. A 62mm or higher is a good starting place. Brands: My favorite outdoor wheel is the Atom Pulse. Second runner up is the Radar Energy. And my third runner up would be the Moxi Gummy. Hope that gives you a little insight

Ahhh, just caught the other part of your question in regards to turns outdoors. Just remember, a sticky wheel is a slow wheel so my not be so great for spins and turns outdoors. You'll definitely want to get into the 85a or higher ranger for more advance skating involving a lot of elements where you'll need some slide and use of your edges.

Largest size I'm seeing online is a 13. I'll drop a link if I find anything though.

So he doesn't have spacers in this video...he has washers. Spacers go in-between the bearings.

This is so that the wheel doesn't touch the kingpin (depending on what size wheels you have on your skates) and keep the bearings from having direct contact with the end of the axel.