How to Change SIG Sauer P365 XMacro Backstrap

Рет қаралды 16,590

Күн бұрын

Harry from UBR Tech shows you how easy it is to change the SIG Sauer P365 XMacro's backstrap.
This video is to show you how to assemble and disassemble for purposes of repair or maintenance only.
Tool set:
amzn.to/45zjP6E
Follow me on Instagram @UBRTechInc
Subscribe for more UBR Tech content @UBR Tech
If you would like to support the channel, you can make a donation at paypal.me/UBRTech. All donated money goes directly to improving the channel and content.
Thanks for watching and don't forget to subscribe.
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including KZfaq) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.

Пікірлер: 43

@marcb1278 Жыл бұрын

I thought it'll give me tip on how to tighten the slack or looseness on the back strap but I guess some people who doesn't read the manual might need some help. Thank you for helping them. Love you channel!

@UBRArsenal Жыл бұрын

Hey Marc, my blackstrap doesn’t have any slack at all. I didn’t know this was an issue. Sorry the video didn’t help with your issue. I’ll keep an eye on the one I have to see if the blackstrap become loose. I had some people ask for these videos so that’s why I uploaded the video. Reading you love the channel makes my week. Thanks for being a subscriber, watching my videos and leaving a comment. Have a great day buddy.

@adamcall3664 Ай бұрын

Thanks for the video! It's very thorough... Switching the slides is a lot easier than I thought

@UBRArsenal Ай бұрын

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

@johnkvockasr.2847 Жыл бұрын

Very detailed and helpful! Thank you!

@UBRArsenal Жыл бұрын

Hey John, You’re welcome! I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

@rhenriksen Жыл бұрын

Rare to see such good IQ and focus! Good job

@UBRArsenal Жыл бұрын

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

@shawncat65 10 ай бұрын

That was a thorough video!

@UBRArsenal 10 ай бұрын

👍🏼🤜🤛

@Lotus6154 5 ай бұрын

Very useful. Thank you for making this video

@UBRArsenal 5 ай бұрын

I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

@toddtharp2377 Жыл бұрын

Great video, great detail. Thanks!

@UBRArsenal Жыл бұрын

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

@tonycoles8508 Жыл бұрын

I really appreciate this channel

@UBRArsenal Жыл бұрын

I’m really glad you find value in the channel. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

@bobs6316 Жыл бұрын

Thanks for the video! 👍🏼

@UBRArsenal Жыл бұрын

Hey Bob! You’re welcome!

@xt000ggang7 2 ай бұрын

Thank u easier than i thought!

@UBRArsenal 2 ай бұрын

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

@negrinator0071 8 ай бұрын

Great video

@UBRArsenal 8 ай бұрын

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

@TheRios7018 11 ай бұрын

Thanks bud 👊👍🏼

@UBRArsenal 11 ай бұрын

I’m glad the video helped. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

@hitfoods1726 8 ай бұрын

Thanks man!

@UBRArsenal 8 ай бұрын

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

@mixdbyjoshua5621 Жыл бұрын

Thank you as I was about to tear mine apart lol

@UBRArsenal Жыл бұрын

Lol! I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

@chrome_o2860 Жыл бұрын

I got the pin out without issue but I cant the the backstrap to slide off for the life of me, any idea how I could get it to slide off?

@UBRArsenal Жыл бұрын

I don't know why yours is so hard to slide off. Are you using both thumbs like I do in the video to slide the back strap off?

@jadan2000 Жыл бұрын

Do you actually need to do a field strip to do this? It seems like it can be done without taking off the slide.

@UBRArsenal Жыл бұрын

I guess not but I always do that when I change any pistols back strap these days.

@jadan2000 Жыл бұрын

@@UBRArsenal any specific reason why?

@UBRArsenal Жыл бұрын

There’s a couple reasons but the main reason is safety. I like to be extra safe for my videos. This way if someone is following my how-to video and they are following how I do things, they will be safer too. Hope that makes sense.

@FilmJunkieOutdoors Жыл бұрын

link to a punch kit you would recommend?

@UBRArsenal Жыл бұрын

This is the punch kit I use. Thanks for watching. Wheeler Hammer and Punch Set with Punches, Brass/Polymer Hammer, Storage Case for Gunsmithing, Firearm Maintenance a.co/d/0mfENpr

@FilmJunkieOutdoors Жыл бұрын

@@UBRArsenal thankyou

@Hangs4Fun 9 ай бұрын

The TACOPS variation of the XMacro it has a flared magwell and it looks like you need to remove that before doing the backstrap installation. REALLY, wish Sig would have these instructions in their owners manual. There's not mention of the flared magwell or the 3 backstrap options.

@Hangs4Fun 9 ай бұрын

weird, I JUST received my TACOPS from Academy sports, got home and was inspecting the flared magwell, and noticed there is female threads. The flared magwell just pulls off and there appears to be a place for a screw to go here to hold the flared magwell in place.

@UBRArsenal 9 ай бұрын

I agree. I also wish they added the mag well to both the TACOPS and the XMacro. That way my how-to videos would help both owners. Thanks for watching and leaving a comment. Have a great day.

@Hangs4Fun 9 ай бұрын

@UBRArsenal thanks. Turns out mine was missing the screw (nut was there in the backstrap though). Called Sig Support and they were great, sending out part and I suggested added the backstrap and flared magwell to the manual. The flared magwell has two little circle indents on either side of the screw hole so I didn't wanna just forcing stuff. Normally, you would just remove the screw, then carefully slide of the flared magwell, then follow your instructions for the backstrap change, then carefully slide the flared maxwell back on (noting the direction) and reinstall the screw.