How to change Strut Mount on HONDA JAZZ 1 TUTORIAL

How to change Strut Mount on HONDA JAZZ 1 TUTORIAL | AUTODOC

Рет қаралды 100,954

autodoc.co.uk

7 жыл бұрын

How to change Strut Mount / Strut Bearing on HONDA JAZZ 1 TUTORIAL | AUTODOC
Top brands that produce Strut Mount: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
On our website you will find a wide range of auto parts you are interested in: goo.gl/Hv16q1
Strut Mount: goo.gl/iqGoQJ
Strut Mount for HONDA JAZZ 1: www.autodoc.co.uk/car-parts/s...
Mobile Shop: m.autodoc.co.uk
► How to replace spark plug on HONDA JAZZ 1 - • Video
► How to replace a rear wheel bearing on HONDA JAZZ 1 - • How to change a Rear w...
► How to replace Pollen Filter on HONDA JAZZ 1 - • How to change Pollen F...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZfaq: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.misinterpretation of the given information. This video is for guidance only and does not guarantee a specific outcome. The user is personally liable for .incorrect or hazardous use of repair equipment, instruments or car parts. AutoDoc highly recommends to be careful and follow the safety rules during repair and replacement works. Keep in mind that exploitation of low quality auto parts does not guarantee the adequate level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

Пікірлер: 47

@rplmia 7 жыл бұрын

should have just showed how to change the front strut and compress the spring maybe next video . love the rest of the videos!

@samhussain5496 9 ай бұрын

I always watch autodoc videos. Mate, your skills are speechless. I wish you could do some work on my Honda Jazz. I would love to keep my car as long as I can. Please reply if you do repairs privately.

@autodocuk 9 ай бұрын

Unfortunately we do offer repair services.

@buddyvdbfive4552 8 ай бұрын

Is there a possibility that I could have pulled the CV joint out of the gearbox? I can’t get the caliper assembly to line up nearly with strut’s second bolt 😢

@xfist2facex 3 ай бұрын

Yes! just did mine today and spent hours trying to work out why it wouldn't line up again. Just had to giggle pushing back in toward the gearbox while spinning the axle and eventually the splines lined up and went back into place.

@jordanreg5085 2 ай бұрын

Standard issue , it's the inner cv tripod rotate your wheel/rotor disc and push inwards ,

@qheanne 2 жыл бұрын

nice thanks for this tutorial. . . Can you also do a video of condenser fan disassembly for honda jazz 1 GD . . . Thanks in advance . . . keep it up

@autodocuk 2 жыл бұрын

Unfortunately, we don't have the requested tutorial for HONDA JAZZ 1. The list of existed tutorials for HONDA JAZZ 1 can be found here: kzfaq.info/sun/PLWep5LzT0sxn9ujOY2jWphapQbON_qlCy We are currently working on creating a wider range of tutorials. Stay tuned and follow our latest updates. AUTODOC

@jimmy111086 2 жыл бұрын

My upper strut nut is too tight, it snapped my allen key. Any advice on how to loosen it? I dont have access to an impact gun.

@rickysmith9284 8 ай бұрын

Sorry its a year too late but beating the Allen key in the direction to loosen it or hitting the Allen key square to the bolt as you're applying pressure may help

@ghist420 7 жыл бұрын

done this job a few times and must say, the way the knuckle went back into the strut like no sweat at all, hardly any lifting.. not how it goes in the real world

@autodocuk 7 жыл бұрын

Thank you for the feedback!This video is considered to be an informative one, and it is approximate. Best regards, Autodoc.

@samhussain5496 9 ай бұрын

Oh mate. Music to my ears. Send us your work shop details or link. Please

@autodocuk 9 ай бұрын

Unfortunately, we do not provide auto repair services.

@arielunicorn2442 5 жыл бұрын

How to know if absorber mounting to bad?can tell me pls

@autodocuk 5 жыл бұрын

Thank you for your feedback. Probably the part broke down and we recommend you to contact the specialized service. If you need any recomendatiomns concerning to order the parts for your vehicle or replacement of the part please feel fre to contact our support team.Best regards,Autodoc!

@danialrafiqi9346 4 жыл бұрын

There will have a gap

@jupiterenigma9132 3 жыл бұрын

Just had my passenger side strut mount changed....if you buy the kit , which is the rubber strut mount as shown , it comes with the silver bearing also which can be seen in this video.... why he didn’t change that bearing whilst it was off??? The new strut mount I bought was £26 and that included the new bearing.peace of mind with the new bearing fitted too...

@autodocuk 3 жыл бұрын

Sometimes it is easier to replace only the bearing Thank you for your comment. We'll take this into account

@uhsen 6 жыл бұрын

air impact tool to put every back leads to over torquing

@autodocuk 6 жыл бұрын

Thank you for the feedback! Your opinion and remarks are very important for us. We will take them into consideration for our next tutorial. Best regards, Autodoc.

@holyshapes 4 жыл бұрын

how many hours about for both? maybe 2 hours total?

@autodocuk 4 жыл бұрын

Thank you for the comment! It depends on the technical condition of the part itself, on average it takes from 40 minutes till two hours to replace one side. Stay tuned and follow our latest updates. Best regards, Autodoc.

@YaoGamers 3 жыл бұрын

why not clean it when swapping the part ?

@autodocuk 3 жыл бұрын

Thank you for your comment. We understand that mistakes were made during the replacement and in the future, we will try to no longer allow this.

@triniredman 11 ай бұрын

Why does my shock mount on top move so easily? is it supposed to do that?

@autodocuk 11 ай бұрын

It is difficult to advise something without proper diagnostics so that we recommend contacting the professional car workshop. AUTODOC

@Mystic-Matt 2 жыл бұрын

What’s a number 7 wrench… 7mm?

@autodocuk 2 жыл бұрын

This is a 7mm hex. AUTODOC

@freescho 4 жыл бұрын

after replacing the struts mounts, the car is shaking when accelerating. Whats the problem??

@autodocuk 4 жыл бұрын

Thank you for your comment. According to the description, it is difficult to solve your problem, we recommend contacting the service for a complete diagnosis and identify the cause of the problem. Best Regards, Autodoc team.

@bronniesboy Жыл бұрын

What is the symptom of a bad to strut mount

@autodocuk Жыл бұрын

There can be many signs, and without proper diagnostics, we cannot advise anything, please contact the service.

@JohnWhite-zt5gb Жыл бұрын

Seems like he coulda just undid the top nut and it would've fallen enough to change?

@autodocuk Жыл бұрын

This is not enough.

@Jonathan-L 6 жыл бұрын

My Honda dealer quoted me about 800 quid to change just ONE strut mount!!! Naturally, I didn't give them the job.

@autodocuk 6 жыл бұрын

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@Gruxxan 6 жыл бұрын

Jonathon L, i just got quoted £334.54 for both sides at my honda dealer

@Jonathan-L 6 жыл бұрын

Even £334.54 seems expensive, so it's probabaly better to get the replacement parts cheap from Ebay, take the car to a good mechanic and get them to fit the new parts. If they've never done the job before, just refer them to this KZfaq clip.

@Jonathan-L Жыл бұрын

@@WawkaNaPisjune If you don't have all the essential tools, then the job ends up taking longer or you can't finish the job without calling in an expert who can complete the job. Get more quotes for the repair job and you might be able to pay less than the 600 you have already been quoted.

@jokernepalm 6 жыл бұрын

Instructions unclear, shaft stuck in cylinder no. 4

@autodocuk 6 жыл бұрын

Thank you for the feedback!This video is considered to be an informative one, and it is approximate. Best regards, Autodoc.

@jokernepalm 6 жыл бұрын

Imma jokin'

@kendelion 5 жыл бұрын

lol i thought you gonna do the dick joke!

@paulcraig7243 6 жыл бұрын

why is there no voice over in all your videos? looks like so much time goes into making these videos. Makes them lame

@autodocuk 6 жыл бұрын

Thank you for the feedback! We are glad that our tutorial was helpful for you. Your opinion and remarks are very important for us. We will take them into consideration for our next tutorial. Best regards, Autodoc.