How to Change the Oil and Filters on a John Deere 3038E / Hydraulic and Fuel Filters included.
Рет қаралды 15,234
2 жыл бұрынIn this video I show you step by step how to chance the Fuel Filters, the Oil & Oil Filter and the Hydraulic filters on the John Deere 3038E Compact Tractor. In this video I give you the John Deere Part numbers for all the filters.
#johndeere #tractoroilchange #tractorservice
Part#'s for John Deere 3038E: NOTE: These part No's fit JD 3038E with SN 610001-
Oil Filter M806419
Fuel Filters MIU803127 & MIU802421
Hydraulic Filters LVA14703 & LVA16054
5 qts of Plus-50 ii SAE15w-40 oil
AMAZON AFFILIATE LINKS: See my Home page and click the COMMUNITY TAB / PAGE to see all
Amazon Affiliate Links.
*DISCLAIMER*
WHEN USING ANY OF MY AFFILIATE LINKS I GET A SMALL COMMISION AT NO COST TO YOU.
Thank you very much for watching & following Poorboys' Little Homestead / Papaw's Place. Every time you Like, Share, Comment, & Subscribe, you are being a tremendous help to this homestead. So Thanks Again and God Bless.
Website: www.poorboyslittlehomestead.com
*ALL MY MUSIC is by a friend and/or myself **
Contact : If you would like to mail something or just
reach out to Poorboys' Little Homestead / Papaw's Place
Email: poorboyslittlehomestead34-99cr@yahoo.com
If you would like to help / support Poorboys' Little Homestead you can do so via: paypal.me/Poorboy51 anything is greatly appreciated.
*DISCLAIMERS*
1) When using any of my affiliate links I get a small commission at no cost to you.
2) Anything you see me doing, Advice and/or information given is not professional advice and should be acted on at the user’s own risk.
Thanks and God Bless!
@annieburwell5174 2 ай бұрын
This is the most helpful 3038e video I have seen, thank you
@papawsplace 2 ай бұрын
Glad it was helpful. Thank you much for the comment.
@dougfarris312 2 жыл бұрын
As a first time tractor owner, this video was fantastic! Really appreciate it. Well done!
@papawsplace 2 жыл бұрын
Thank you Mr. Doug.
@mt6144 16 күн бұрын
Very helpful, very good content. Thanks for your time in making this video.
@papawsplace 16 күн бұрын
Thank you! and Thanks for taking the time to leave a comment.
@timcountryman961 2 жыл бұрын
Thank you for this video! I appreciate the heads up about the O rings, and I especially appreciate how your camera wasn't flopping around giving me a headache. Great video.
@papawsplace 2 жыл бұрын
Thank you Mr. Tim
@tracywilliams5703 2 жыл бұрын
Thank you for this video. I just bought me a tractor just like this one, and this video was very helpful in changing these filters.
@papawsplace 2 жыл бұрын
Thanks for Dropping in Tracy.
@centraltexashomestead-mike4956 2 жыл бұрын
Hi Eddie, you always make real good detailed videos. We had a small series 1 when we had 15 acres years ago and it was a work horse. We are getting a cool front this Sunday and some finally needed rain. God Bless you and your family. Mike
@papawsplace 2 жыл бұрын
Hello Guy's and thanks for dropping in. I hope we get some rain also, it's very dry over this way. Thank care my friends and God Bless!
@WillieHarris-qw6uk 3 ай бұрын
Well done. I agree with your comment on the oil dip stick. It is a pain 😂
@papawsplace 3 ай бұрын
Very much a pain.
@fallenknight4943 6 ай бұрын
Hey buddy i have one of these tractors that is written in Japanese. Great video ✌️
@papawsplace 6 ай бұрын
Thank you!
@tommyperkinshuntingfishing8424 2 жыл бұрын
I enjoyed the video but I laughed way before you couldn't find where the dipstick went. At about 8:45 you said exactly what I was thinking. God bless
@papawsplace 2 жыл бұрын
Yes, Sir it's crazy they make stuff like this when it's an easy solution to fix.
@tommyperkinshuntingfishing8424 2 жыл бұрын
@@papawsplace i agree
@DRWEBMAN Жыл бұрын
Thanks for the help. I have almost 50 hrs on my 3038E and an getting up the courage to attack it.
@papawsplace Жыл бұрын
You got this, save yourself lots of money also.
@lisapetmecky7345 Жыл бұрын
Great stuff. Thank you for making this. I learned a few things.
@papawsplace Жыл бұрын
Glad it was helpful!
@wulfclaw4921 4 ай бұрын
Thank you kindly fir the instructional, sir. Wulfy
@papawsplace 4 ай бұрын
You are welcome. Thanks for commenting!
@kadecarthel5297 Жыл бұрын
Thanks for the excellent video…sure helped me changing filters in my new tractor!
@papawsplace Жыл бұрын
Glad it was helpful my friend.
@kadecarthel5297 Жыл бұрын
@@papawsplace I share your disdain for overly-tightened filters as well! 😂
@papawsplace Жыл бұрын
@@kadecarthel5297 LOL
@2rueblue 2 жыл бұрын
Brilliant stuff buddy, looks an impressive little tractor, I'm guessing it's not the cheapest on the market having the branding it has, take care stay safe and god bless brother
@papawsplace 2 жыл бұрын
Your correct Cam, the JD is selling its name more than the product being built. LOL that's why I don't own a JD. LOL
@newdayfarm9463 Жыл бұрын
Oh man that gave me a good laugh! 😂. I have a John Deere 790 and I can vouch just how right you are on that dip stick. Such a pain. I have the hinge clips to remove the side cover on front and back so I believe the bolt was replaced on that one too. I believe I’m bout due for filter and oil change also. Great information!
@papawsplace Жыл бұрын
JD could have done a better job with that dip stick for sure. All they have to do is make the tube and the dip stick long like on a pick-up truck and they could have them on top of the engines.
@newdayfarm9463 Жыл бұрын
@@papawsplace Amen I agree.
@douglasvangorp836 Жыл бұрын
By far the best video on changing these filters and fluids. First time JD did it for me, it costs over $700. Granted they may have done a multi point inspection but $700???
@papawsplace Жыл бұрын
Thank you much!
@wellerjohnjr 4 ай бұрын
Thank you, very informative
@papawsplace 4 ай бұрын
Thank you for the views and commenting!
@Mark-gz8dk Жыл бұрын
Really enjoyed your video, told me everything I needed to know. Luckily my work tractor doesn't have a loader as she's just used for mowing the runway and airside and outfield grass at a small airfield over here in England. Lovely little tractor though.
@papawsplace Жыл бұрын
Glad to be of help my friend and thank you for commenting.
@warrentruss9173 Жыл бұрын
Enjoyed video!!!
@papawsplace Жыл бұрын
Thank You
@kyledauphinet6978 Жыл бұрын
Great Video sir! Thank u
@papawsplace Жыл бұрын
Your very welcome and thank you for commenting. God Bless!
@NowWhatTravelReady 2 жыл бұрын
Nice tractor!
@papawsplace 2 жыл бұрын
Just doing a job for another man Ms. Charlene. Mine is the Mahindra.
@benstolie 2 жыл бұрын
Thanks for the info. God Bless.
@papawsplace 2 жыл бұрын
Thank you, Mr. Ben
@donsgotmoney 2 жыл бұрын
I cant tell you how many jack legs I wanted to hit, as a reefer trailer mechanic working on both carrier and thermoking diesels, folks think those fuel filters are pressured filters and need to go on with a torque wrench. They dont, keep doing them that way and you will wind up paying somebody else to remove those filters. Ive spent a couple hours with a cut off wheel just removing the filter base. Fuel filters are suction not pressure, oil filters are pressured, not suction. Loved the advise on making sure the filters are not double ringed, good way to screw your engine up.
@papawsplace 2 жыл бұрын
The bad thing is people don't know and what read the directions on anything. LOL
@bigsonslawncare 2 жыл бұрын
I like this stuff!
@papawsplace 2 жыл бұрын
Hello Big Son's Thank you much sir. There will be more to come.
@bigsonslawncare 2 жыл бұрын
@@papawsplace I'll be watching for sure 💯💪🏽
@johnathonmarin639 3 ай бұрын
thank you sir
@papawsplace 3 ай бұрын
Anytime.
@billhunt892 2 жыл бұрын
Hi bud , I am sure glad you wasn’t gonna grease it , cause when you wasn’t looking…. I borrowed your grease gun …. By the way… you’re outta GREASE ! LOL ! Good video
@papawsplace 2 жыл бұрын
Mr. Bill from this day on every time I get my grease gun out and it's no grease in it. I'm thinking of you my friend. LOL
@hideskinnerbuck5316 2 жыл бұрын
Look forward to changing hydraulic oil.
@papawsplace 2 жыл бұрын
Well Mr. Hideskinner, it's not happening on this tractor at this time anyways. The fellow only wanted the filters changed this time.
@deehendon4204 Жыл бұрын
Can you do a follow up on grease points and Joyce stick lube. This video really helped me with my 3032e. Thx
@papawsplace Жыл бұрын
I would love to but that was not my tractor. I was servicing it for someone else.
@JAHarrell46 Жыл бұрын
Thank you
@papawsplace Жыл бұрын
You're welcome
@DRWEBMAN 8 ай бұрын
Have you made a video for changing a dead battery on a 3038e with a bucket? AND, have you found an easy way to line up the PTO shafts when changing implements? (The output shaft will NOT rotate freely and I have to crawl under move a blade 14 times when by myself.) Thanks in advance.
@papawsplace 8 ай бұрын
I haven't made a video changing the battery out. The 3038 belongs to a friend I was servicing it for him. I set my bushhog on blocks, that way the shaft turns easy when time to hook it up.
@ghostridergale Жыл бұрын
You talking about John Deere being Chinese tractors reminds me of my brother in law that was one of those guys that’s got the attitude you only buy American! He bought a Ford Bronco of course thinking it was all American made. Should of seen the look on his face when he learned the transmission in his American made Ford was the same transmission in a Mitsubishi vehicle! 😂 Naturally I never let him live that one down! Since he loved bad mouthing my Japanese Datsun or Toyota I owned.
@papawsplace Жыл бұрын
😂 Yes sir, them made in the USA stickers get to some people's head.
@donnieschober7544 Жыл бұрын
I enjoyed the video and I also had trouble getting the dipstick back in the hole. The engineer who designed that setup needs to go back to school! Following the oil change, my Deere refuses to crank. I'm told that the logo in the dash indicates that there is low oil pressure in the engine. I need to know where the sensor that detects this low pressure is found so I can replace it. Thanks in advance for your help and God bless.
@papawsplace Жыл бұрын
Wish I could help you but this was not my tractor so I can't help you with that one.
@MyDeere3320 Жыл бұрын
Just a little correction, but that writing is Japanese, not Chinese. Great DIY video by the way. I'm gonna be doing my 3320 soon since I bought it off an auction.
@papawsplace Жыл бұрын
Some of that Made in the USA Japanese writing. 🤣🤣
@tracywilliams5703 2 жыл бұрын
Question: I just bought a 3038E tractor from a guy that had 220 hours on it. I drove it for about an hour and it kept going dead so I changed all the filters on it and there was a lot of water in the water seperater. Now the tractor is going dead and the oil pressure light is blinking on and off. Do you have any idea what may be wrong?
@papawsplace 2 жыл бұрын
That could be many things, First I would check my separator again and if it has trash or water in it again, I would drain the fuel tank and flush it good.
@ultraclassic1550 Ай бұрын
That writing on the Filter is Japanese which is where that Yanmar motor was made.
@papawsplace Ай бұрын
Japan made stuff is good stuff.
@joetolopino7126 Жыл бұрын
Pretty sure the writing on that fuel filter was Japanese as that's where the Yanmar engines are made. Thanks for the helpful video.
@papawsplace Жыл бұрын
Maybe, I barely can read English must less any foreign stuff. LOL
@tracywilliams5703 Жыл бұрын
What size bushhog is recommended for this tractor?
@papawsplace Жыл бұрын
5 foot because the weight of a 6 foot is to much for the light weight of the tractor.
@tracywilliams5703 Жыл бұрын
@@papawsplace Thank you so much.
@papawsplace Жыл бұрын
You are very welcome
@enigmawyoming5201 Жыл бұрын
Love you style! But… what year 3038e do you have? I have a 2012, but it looks different than yours, and different than another KZfaq good ‘ol boy video which looks different than yours and mine! And no… I didn’t buy my JD 3038e from a guy in Tijuana Mexico asking me if I wanted to buy a tractor he had on the inside of his trench coat… like “genuine” Rolex watch.
@papawsplace Жыл бұрын
🤣🤣I'm not sure what year it is, that was my brothers-in-law tractor I was doing a service on for him.
@enigmawyoming5201 Жыл бұрын
@@papawsplace Thanks for the quick reply. Like I said, I love your style! New subscriber here. If if you post something I’m not particularly interested in, I’ll still watch and “like” because of your way of talking to us here in the digital wasteland.
@papawsplace Жыл бұрын
I appreciate that much! 🤣🤣🤣🤣I don't have any sisters available at this thime but I'll keep you updated if one come available. 🤠🤠
@themcfarlandteam2938 2 жыл бұрын
👍
@papawsplace 2 жыл бұрын
Thank You.
@thatguy2224 Жыл бұрын
No pin up front. Comes from the factory as a 10mm.
@papawsplace Жыл бұрын
👍
@slamsshenanigans2296 Жыл бұрын
Howdy, great maintenance video! For you and any of your subscribers with a 3 series tractor if you ever lose your transmission and steering, come on over to my channel for the fix. I couldn’t find anything when I went through it so trying to help out!
@papawsplace Жыл бұрын
Hello Slam's, Thanks for that info. I'll check it out. 👍
@Bekind1980 2 жыл бұрын
All I do is lift the loader up in the air way easier
@papawsplace 2 жыл бұрын
They could still do better Sir. God Bless!
@douglasvangorp836 Жыл бұрын
Be careful doing that. My 2 yr old grandson climbed into the drivers seat and threw the lever causing the bucket to crash to the ground pinning my foot. Screamed like a MF to get someone to raise the bucket. Moral: put a block under where the bucket contacts the ground. Or tie the grandson to a tree.
@papawsplace Жыл бұрын
I have a 3-year-old grandson and I know what you mean. LOL
@user-si7uy3cj4b 7 ай бұрын
😂 Dip stick problem.
@papawsplace 7 ай бұрын
👍👍
Midwest Hunting & Outdoors by Two Dumb Asses
Рет қаралды 2,7 М.
Danimal’s House
Рет қаралды 324 М.
Big Daddy Addy
Рет қаралды 8 М.
Tractors USA
Рет қаралды 34 М.