How to change the oil for boat trailer hubs: First time DIY

No video

How to change the oil for boat trailer hubs: First time DIY - simple and easy.

Рет қаралды 14,558

Күн бұрын

Due to the accident with my friend's boat trailer last week, today I am going to share with you how I change the trailer's oil bath hub and check the trailer.
***Important: Thank you so much for watching and subscribing to my channel. You are the reason for me to do my videos. Please continue to support me and my channel. All the money I receive from youtube will help others.
Welcome back to my Fishing 247 channel. I really appreciate everyone watching and subscribing to my channel. It means a lot to me. I will try to have a fishing video for you to enjoy weekly from now on. If I cannot go fishing, I will have videos related to fishing, cooking, or tutorials.
Be happy, stay healthy, stay safe, and go fishing. Have a great day.
• How to change the oil ...
Instagram: Thuy fishing 247
FACEBOOK: / thuy.stlucy
Email: thuy_stlucy@yahoo.com
Please support the following youtube channels:
1/ Fishing fanatic: / @aquaticlife101
2/Moo of Moo Moo Outdoor: / moomoooutdoors
3/ Keith of TLA: • TLA Lost Footage Part ...
4/ Oleg of Family Fish Killer: / @familyfishkiller1062
5/ T/C of Connected Fishing: / connectedfishing
6/ JU of JU Nation: / jultimatefisherman
7/ MiMi of Mimi Fish fish: / @mimifishfish
8/ Luis of Fishing Failure: / fishingfailure
Be happy, stay healthy, stay safe, and go fishing. Have a great day.

Пікірлер: 68

@toddnicholas8945 3 жыл бұрын

Good job 👍. Put some lubricant on that hub gasket!!! Just like you would on a oil filter gasket ! A little grease on your lugg bolts will be good also! Great video buddy!!! Rust never sleeps ⚓️

@Fishing247 3 жыл бұрын

Thank you Todd for the advices. I will do it again to make sure I do it right.

@JUNationFishing 3 жыл бұрын

Great job. My big bro just did that last month. We were fortunate to see the oil leaked when we got home from one of our fishing trips. Have a great day. 👍🙏🎣⚒

@Fishing247 3 жыл бұрын

Thanks brother. Safety first. Just make sure the next trip will be smoother.

@danielramos7394 3 жыл бұрын

Great DIY video, it a reminder to check the bearings, they are also known to het up!!

@Fishing247 3 жыл бұрын

Let me know and I can change it for you. Thanks for watching.

@BabsiHomeCooking 3 жыл бұрын

Wow! Great video! So beautifully you did! Amazing! Thank you for the excellent video My dear friend! Lots of Love! God bless you!❤️🙏

@Fishing247 3 жыл бұрын

Thanks for watching Babsi

@YourNextCast 3 жыл бұрын

Great DIY, thanks for the walkthrough.

@Fishing247 3 жыл бұрын

Thanks. I am glad you like the video.

@TheLostAnchovy 3 жыл бұрын

That's cool Thuy. The trailer ran really smooth the other day. For sure what you did worked!! Thanks for sharing 😊

@Fishing247 3 жыл бұрын

Hahaha. I did one thing wrong. The tire was inside out. One of the viewer point it out and I corrected it today. 😂😅

@kirkwesterveltoutdoors 3 жыл бұрын

Excellent video...Thank You Sir

@Fishing247 3 жыл бұрын

Thanks for your comment and watching.

@thuythu1831 3 жыл бұрын

Nice DIY video.

@Fishing247 3 жыл бұрын

Thanks

@quikdraw19 2 жыл бұрын

Awesome video

@Fishing247 2 жыл бұрын

Thanks.

@alwallis2000 2 жыл бұрын

Great video !!

@Fishing247 2 жыл бұрын

Thanks All.

@chicles4512 3 жыл бұрын

thanks for the education

@Fishing247 3 жыл бұрын

Thanks Vidal for watching.

@aProudOG 3 жыл бұрын

Just read all of the comments after watching your DIY vid. Respectfully, I’ll continue taking my trailer to an expert for such maintenance. Somewhat mechanically challenged, I see too many ways I can screw that up.

@Fishing247 3 жыл бұрын

Lol. I understand. I did screwed up by putting the tire inside out. A viewer mention and I corrected it. Thanks for your comment.

@noyzizi Жыл бұрын

You can leave the oil in there for 3-4 years unless it's milky then change it out. Oil is much easier than grease. I would say to put a little oil on the gasket before screwing it back on so it can seal better and maybe clean the bolt before you screw it back in otherwise good job!

@Fishing247 Жыл бұрын

Thanks. I will do the right way next time.

@dogsense3773 3 жыл бұрын

I'm 65 years old been working on cars for 50 years, always have safety stand under axle not just the floor jack, I've had floor jacks fall apart and the car came down in 2 seconds thanks

@Fishing247 3 жыл бұрын

Thanks for good advice. I always do that with car and forgot with the trailer. Serious mistake. Lucky nothing happened. I need to go through the safety protocol from now on thanks for watching and commenting.

@pjcombs27 Жыл бұрын

Good video. You forgot to put a some oil on the o-ring that is in the cap.

@Fishing247 Жыл бұрын

Thanks brother. I did it again later on when I read one of the comments.

@rockbottomfishing1967 3 жыл бұрын

just a fyi the wheel is on backwards

@Fishing247 3 жыл бұрын

Oh. I will checked again. Thanks for pointing it out. Thanks for your comment.

@Fishing247 3 жыл бұрын

Thank you brother. I just checked the tire and it was inside out 🤣. The air valve is on the insides. Thanks for pointing it out. I will redo it tomorrow. Thanks again for your comment. 🙂

@rockbottomfishing1967 3 жыл бұрын

just want to make sure you’re safe for the next trip man

@Fishing247 3 жыл бұрын

Much appreciated. Means so much to me. Hope to cross path with you someday. Stay safe and good luck fishing

@46fd04 2 жыл бұрын

DO NOT put oil or grease on wheel lugs! I would put oil on the spindle where the rear seal goes over. I would also put oil on the aluminum cap's rubber o-ring.

@Fishing247 2 жыл бұрын

Thanks

@freewifi8947 Жыл бұрын

Thanks for the tutorial. Do you know where I can get a new cap?? Mine is leaking (reliable parts original cap)

@Fishing247 Жыл бұрын

Hello. I bought on eBay in 2021:

@Fishing247 Жыл бұрын

I bought on eBay. I don't know if they still have it. EZ-LOADER OIL BATH HUB CAP 5 LUG WITH O-RING 250-034388 FITS 10" RELIABLE HUBS

@Fishing247 Жыл бұрын

Hello. I just check and eBay has it.

@stevemonte4027 4 ай бұрын

I think you put that tire on backwards....valve stem goes out

@Fishing247 4 ай бұрын

Lol. You the only one to spot it. After installing it, I tried to put air in and found out it was inside out and I did put it back correctly. Thanks for your comment.

@tomhuynh7556 3 жыл бұрын

Thanks for the video bro. I have an old trailer that does not have caps at the wheel hub. So, you mentioned that you bought at an EZ Trailer store. Is that store on line or is it somewhere in the Bay?

@Fishing247 3 жыл бұрын

The store is located bin San Jose corner of Moorpark and Winchester.

@sinhtran859 3 жыл бұрын

chú ơi bữa nào đi câu cá mú ở monterey cho con đi với chú ơi . con ở san jose thanks chú

@Fishing247 3 жыл бұрын

Chú còn vài người đang đợi chú. Khi nào được chú sẽ cho con đi.

@MooMooOutdoors 3 жыл бұрын

I wonder if I'm supposed to do the same for my cargo trailer.

@jus4funtim 3 жыл бұрын

It doesn't hurt to check, especially if you haven't in a couple of years, although your cargo trailer isn't exposed to salt water

@Fishing247 3 жыл бұрын

Thanks for your comment.

@scotthammond9913 3 жыл бұрын

Those bearing need to be packed with marine grad bearing grease. Your bearings are dry and will over heat causing them to seize and fail. I carry a new hub with packed bearing with me on every trip. Learned the hard way.

@Fishing247 3 жыл бұрын

Hi Scott, I contacted EZ trailer dealer before I did the oil change. They told me that don't grease the bearings because it is the oil bath hubs. So I only cleaned checked the bearings and replaced the oils.