Good job Steve! Very thorough that any noob can follow. Keep the videos coming.

Thanks dude! I just changed the headlights in my tuscon yesterday thanks to KZfaq so this is my next project.

For those of you asking about these ramps...DO NOT BUY ! They are 12k lb capacity floor ramps, but one of them cracked just seconds before I rolled under my Cherokee XJ to drop the oil. My Jeep I believe is about 4k lbs. I made my own solid core ramps with 2 x 10, 36" long boards stacked three high or you could go four high if you wish, screwed together and tapered the ends, they will not fail guaranteed. Be safe.

Thank you for sharing this. This literally helped me out just today. Great video. Thanks!

Thank you for beong so comprehensive and direct to the deal 🎉🎉🎉 just got all the items needed doing it in a few hours 😊😊😊 ty Boss

Thank you! Very helpful.

Why can't they all be this easy to work on?! Great vid

I used a 1/2 ratchet with a 17mm socket but noticed you can get to much torque and possibly damage the drain plug so next time I’ll use a 3/8 ratchet with 17mm

Got any videos on replacing speed sensor for tucson 2013 Edit: good video however please! Set the handbrake and chock your rear wheels after lifting or putting your car on ramps. It could rollover.

Hint. Push up on the oil filter as you are removing. It will keep the oil from running down your arm😎 Good Video.

Perfect video bro ! ‘Preciate you💯👌🏻

Sweet. Thanks man.

Good job !

Thanks Steve!

So glad you don't have to remove plastic undercover to get to the drain plug and oil filter.

The Tuscon 2007 requires me to remove the front 4 bolts (12 mm) that secure the plastic rock guard. Then I can bend the rock guard down enough the access the oil filter. The oil drain plug is a 17mm.

Can you put 5 quarts in instead of the 4.6 will it be okay? I also add a little oil to the filter before screwing it on don't want your pump to run dry when you start car!

Thank's for a great vidio! Very spotless. Could you pls do a vidio I'm at 39.000 miles when should a radiator flush and Transmission change be done pls!

I was curious why the crush washer on the oil pan drain plug wasn't recommended to be changed with a new one?

How does chevron syn blend works in your car? Did you buy because of price or just a oil you like to use?

Looks pretty easy, just one thing I would recommend for me as a woman if you could say what size of wrenches you use so I don't have to guess and try different sizes

U know what size bolt the oil plug is? Gonna do a oil change on old ladies car she’s also got a 2010 Tucson and figure if I know before climbing under instead of having like 5-6 different options

very nice,. I imagine the process is the same for a 2021 tucson? Nothing changed over the yrs?

Hello, do you have the filters codes? Greetings from Argentina! Thanks!!!

I use clean oil on the oil filter gasket. I don't want that dirty oil on there. It's full of dirt and grime. And fill it to the full mark according to the manual as all engines consume a little oil between oil changes.

it's better to coat new oil filter gasket with fresh rather than old oil to prevent any debris causing improper fit. also, taking oil cap off before draining can help drain faster by relieving any vacuum effect in the engine. overall, well done.

Thanks you. Yesterday I buy my Tucson 2011 Gasoline 2.0 ,so.... you put 4.5 in total ?

One of the most important pieces of information someone can get from an oil change video is socket or wrench size the performer used to remove drain plug :(

Can u continue to create videos for your tucson 😁

How much did the racks and oil and oil pan cost?

Is this the same for a hunday tucson 2011?

Huff. Next time on the oil filter, use a Solo Cup to unscrew it. It keeps your hand CLEAN. 😊

What size ratchet is that? Thanks for the video!!

What is ramps name and price?

What tool did you use open the bolt?

Uhhh weee! Steve dose and Steve did! I dun and did it Steve!

Wear latex gloves or at least one on your hand. Better to remove oil filter first that way if you drop it in the pan there is no splash.

How often do you change the oil filter?

This 2400cc?

Is synthetic oil okay to use for a brand new Tucson?

Should remove the oil cap before draining the oil pan just to be safe and it will allow the oil to drain better.

Where Do you drain the oil? Like do you just put it in a trash bag and put it in the dumpster or where did you discard it?

Tell the size of the bolt would be nice

Unfortunately you didn’t provide critical detail of the Tucson oil change….you failed to mention the torque spec for the oil plug and the amount to tighten the oil filter whether to turn it a full 360 degrees after the gasket contacted the oil filter base or if 3/4 of a turn was enough.

Any oil change light in the dashboard that needs to be reset?

Where did you purchase those ramps?

Does the drain nut need a crush washer?

where did you get the ramps

Gloves!

Set the parking brake!!!!

It is a good idea to wear rubber gloves.

That's 2.4 cc gdi engine My friend??

Gloves are worth wearing.

Dude, you need a bigger oil container.

Hi Steven hopefully ur still here... I’ve just purchase a 2016 diesel Tucson... one lady owner and like new! The garage say the gave it a full service but the following day I checked oil and it was black... is this normal!?! How can I tell if they changed the oil? Thanks in advance

Where do you take the used oil?

What size is the bolt?

Why is it under manual gear oil section, grrrr

Who else is watching because it’s a late Sunday afternoon and realized most automotive places are closed?

f ya the hand-hammer

Background music got on my nerves

Belly pans waste of time.

Worst video ever lol. No socket size, no tq for oil plug, oil on “plastic” or rubber thingy makes it “easier”. I stopped after that but hey he got it done Lol

Should you use 5w-30 in Florida?