How to change the rear brake discs on TOYOTA PRIUS 2 TUTORIAL

How to change the rear brake discs on TOYOTA PRIUS 2 TUTORIAL | AUTODOC

Рет қаралды 43,592

autodoc.co.uk

8 жыл бұрын

How to change the Rear brake discs / Rear brake rotors / Rear Disc Brakes on TOYOTA PRIUS 2 NHW20 TUTORIAL | AUTODOC
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
Top brands that produce brake discs: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
On our website you will find a wide range of auto parts you are interested in: goo.gl/nzzdsw
Brake discs: goo.gl/E8QzXc
Brake discs for TOYOTA: goo.gl/YS2k1V
Brake discs for TOYOTA PRIUS Hatchback (NHW20): goo.gl/ONpljl
TOYOTA Car parts: goo.gl/uwiuZv
Mobile Shop: m.autodoc.co.uk
► How to replace cabin filter on TOYOTA PRIUS 2 - • How to change Pollen F...
► How to replace the engine air filter on TOYOTA PRIUS 2 - • How to change Air Filt...
► How to change a front suspension spring TOYOTA PRIUS 2 - • How to change a Front ...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZfaq: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video contains only tips and recommendations that can be useful to you in the course of car repair or replacement. AutoDoc shall not be liable for any harm, injury or property damage got in the process of repair and replacement due to incorrect use or misinterpretation of the given information. This video is for guidance only and does not guarantee a specific outcome. The user is personally liable for .incorrect or hazardous use of repair equipment, instruments or car parts. AutoDoc highly recommends to be careful and follow the safety rules during repair and replacement works. Keep in mind that exploitation of low quality auto parts does not guarantee the adequate level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

Пікірлер: 36

@stuartstokes5930 7 жыл бұрын

That's a really nice clean and clear video AUTODOC. I just replaced my front pads today and was going to tackle the rears tomorrow. I've looked at the rear calipers when rotating the tyres and always been a bit puzzled about the single slide pin bolt back there, and to be honest I wasn't quite sure how that was going to work. Your video showed very clearly how it rotates about the other pin once the single removable pin is out. Now knowing how that works I feel very confident that I can quickly replace those pads tomorrow. A big thank you. :D

@autodocuk 7 жыл бұрын

Thank you for the feedback! We hope that our tutorial was helpful for you. Best regards, Autodoc.

@petejacob2513 7 жыл бұрын

I notice the replacement disc he fitted didn't have the M8 removal holes so the next time will be a nightmare. As for letting the caliper hang on the hose, it is a widely touted thing that you should not do it, but the hoses withstand 100's of PSI in use and are more than capable of withstanding the weight of the caliper, just not best practice.

@autodocuk 7 жыл бұрын

Thank you for the feedback! Best regards, Autodoc.

@AndrewVanDay 5 жыл бұрын

I have now found out what has happened and how to fix it. If the discs are old and worn (like mine) the drum shoes for the parking brake within the discs wear into a grove and prevent the disc from coming off even when screwing in the two M8 bolts. In this case you have to remove the little rubber plug and rotate the hub so that the hole it reveals is at the bottom. You will see a drum brake compensator/adjuster wheel. Rotate the adjustor wheel with a flat screwdriver in an upward direction. This will contract the parking brake drum shoes and allow the disc to release (in my case, without any need for the two M8 bolts). I think it would be really great if you could include this information into your video. Luckily I am replacing both discs anyway, but by just following your video I broke one disc and that could have been disaster if I was only trying to service the PB drums. And please could you highlight that the Parking brake MUST be OFF. But thanks for making the video in the first place. And BTY - "xdgmnyrdf" No one's trying to be a 'smartass.' It is a nice video, but it needs to be accurate or you can cause damage to your car - I would think most people would care about that! For 'nice' videos try "Kittens will make you laugh"

@autodocuk 5 жыл бұрын

Thank you for your feedback! You are absolutely right - some moments were omitted. We will add this information for our viewers, when making our new videos. Watch out for the upgrades. Best wishes, Autodoc.

@italianice678 8 жыл бұрын

This is not for USDM Toyota Prius '04-'09 because they have rear drum brakes

@autodocuk 8 жыл бұрын

Depending on the mosification this model can have either drum or disc brakes on the back wheels

@stuartstokes5930 7 жыл бұрын

Hi italianice678. These are mostly regional differences. What is standard equipment in one country is sometimes different in another. In UK and Australia most gen2 prius come with the rear disc brake as standard. There is also a small drum brake built in to the centre of that rotor/drum, but it's only used as a park brake. (You can see the park drum brake very briefly at 3.22 btw.)

@antemiu 5 жыл бұрын

Hi, i have exactly the same rear brake system on my 2006 prius brought from italy and i have problems finding the rear brake pads to fit... For which region is this type of rear brakes?! Thanks

@nopy99 4 жыл бұрын

you have HAVE to disconnect the 12v battery before any brake work on the Gen2 Prius or it could auto activate the electric brake pressure system.

@autodocuk 4 жыл бұрын

Thank you for the valuable clarification. It will be very useful information for our viewers. Best Regards, Autodoc team

@am1992sxe 5 жыл бұрын

Would it be possible for another video to be made on "How to replace the Rear brake drums on a TOYOTA PRIUS 2?"

@autodocuk 5 жыл бұрын

Thank you for your feedback! Watch out for our upgrades. Be sure that the video you are interested in will appear. Best regards, Autodoc.

@saganandroid4175 5 жыл бұрын

@@autodocuk You write strangely, but since Prius Gen 2 almost always have drum brakes, well, hurry up.

@everydayhustle6933 6 жыл бұрын

I love ur videos thanks lot but I'm confused as I own 2nd gen Prius in U.S is rear brake the same thing as this video? When I try to buy complete rear brakes it doesn't include brake pads? Thanks

@autodocuk 6 жыл бұрын

Thank you for your feedback! We have complete kits for your cars. You can visit our website, and we will check all car parts you need for you to make the replacement. Best regards, Autodoc.

@AA-os1sg 3 жыл бұрын

Stark automotive does anybody rate them for parts??

@markthornton3337 6 жыл бұрын

Do you not have to either disconnect the battery or allow 10-15 mins for the brake pressure to relieve itself then leave the key FOB far from the vehicle? Without showing this step won't the brake system be under high pressure and be very dangerous?

@autodocuk 6 жыл бұрын

Thank you for your feedback! The system at this video shouldn't be disconnected, as we won't press back the brake caliper piston, but only will change the brake disc. If you press back the brake caliper , please, open the brake tank cap . Disconnect the manual brake system, if an electric manual brake is mounted.Best regards, Autodoc.

@shuzolmiah9164 6 жыл бұрын

You forgot to release the hand brake and open the brake fluid lid

@autodocuk 6 жыл бұрын

Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, so some stages of the repairs might have been excluded. Best regards, Autodoc.

@robertjohnson7985 6 жыл бұрын

You should mention to put the pads back as they came. The rear pad back in the rear and the front in the front.

@kithmo1 6 жыл бұрын

He should really have put new pads in, not put the old ones back.

@autodocuk 6 жыл бұрын

Thank you for the valuable remarks, we will definitely take them into the consideration while shooting next tutorials. Best regards, Autodoc.

@AndrewVanDay 5 жыл бұрын

What is not mentioned is that the parking brake MUST be off (as far as I can tell). At first I had it on and when the disc would not release I investigated and worked out about the parking drums. I released the PB but still when I cranked the two m8 bolts the disk cracked as the PB was still not separating from it. Same both sides. The PB drums were hardly shown. Surely it is good practice to inspect them whilst the discs are off?

@autodocuk 5 жыл бұрын

Thank you for your feedback! Yes, you are right : before removing the disc, first, loosen the handbrake mechanism and also draw the drum pads so that the pressure to the disc's walls would be minimal. Our new videos will surely include this information for our spectators. Best wishes, Autodoc.

@xdygmnyrdf 6 жыл бұрын

Majority of people in comments here are smartasses. "oh these bolts dont unscrew that easily" who the heck cares. Its a nice video. Go watch ericthecarguy, hes gonna speak the intro for 20minutes before getting to actual subject.

@autodocuk 6 жыл бұрын

Thank you for the feedback! We are glad that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@iubordei 8 жыл бұрын

колодки старые а диск новый :)))

@ivannebesny1927 8 жыл бұрын

Название ролика " как заменить тормозные диски" о колодках речи нигде не идет, в другом видео есть замена колодок

@markthornton3337 6 жыл бұрын

Is in not very irregular to do a brake job without replacing the pads? Why not include replacing worn pads with new pads and show how to depress the piston to allow room for the new pads? It is a very clean and nice video, but for the practical DIYer or garage this video does not demonstrate how to do a brake job on a prius! Beware.

@autodocuk 6 жыл бұрын

Thank you for your feedback! You are absolutely right that when making such replacement, one need to replace the whole kit along with pads. But the car owner preferred to have replaced only the brake disc. In the next videos we will surely show the replacement of the whole kit. Best regards, Autodoc.