How To Change the Valve Cover Gasket on a BMW F10 535i N55

How To Change the Valve Cover Gasket on a BMW F10 535i N55 | BOND Garage

Рет қаралды 21,091

2 жыл бұрын

This video will help you fix a common problem on any engine - a leaking valve cover gasket. I finally got around to change the gasket (and valve cover) on this 2013 BMW 535i at 84k miles. This should be the same for other N55 BMWs and xDrive models.
It might look a little more dramatic than it should since I dissembled way more than necessary for this job while fixing other issues in the same wash:
🎥 Replace AC Compressor & Condenser: • How To Replace The AC ...
🎥 Replace Drive Belt, Tensioner & Idler: • How To Replace the Dri...
Relevant torque specs:
8,5Nm for the valve cover screws
Parts used:
- Valve Cover Gasket kit: www.fcpeuro.com/products/bmw-...
- Valve Cover Kit: www.fcpeuro.com/products/bmw-...
#BMWDIY #N55ValveCoverGasket #BONDGarage
____________________________________________________________________
Instagram:
@hajo.bond - / hajo.bond
____________________________________________________________________
🎶
Before Sunset by Soyb / soybmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0 Free Download / Stream: bit.ly/_before-sunset
Music promoted by Audio Library • Before Sunset - Soyb (...
Track: Stargaze - Declan DP [Audio Library Release]
Music provided by Audio Library Plus Watch: • Stargaze - Declan DP |... Free Download / Stream: alplus.io/Stargaze
Desire by Markvard / markvard
Creative Commons - Attribution 3.0 Unported - CC BY 3.0 Free Download / Stream: bit.ly/desire-m
Music promoted by Audio Library • Desire - Markvard (No ...

Пікірлер: 28

@ninethreetilinfinity9725 2 жыл бұрын

Great video man! Very thorough!

@yomansam4689 2 жыл бұрын

Fucking legend, let me tell you. Actually a God for this video

@jitdaraw2880 2 жыл бұрын

Did it really work for u

@Mysticlyonenterprise Жыл бұрын

Nice n clean work👌🏾

@BONDGarage Жыл бұрын

thank you!

@sheilabalderas780 Ай бұрын

God, i so wish I the confidence to do this but I have NO prior experience with car mechanics. Not only that but I have no one to help/guide me. And its my only car so it sucks being in a position where you want to do it, but not having the resources and plan b to do so

@BONDGarage Ай бұрын

that's true. this is also not the job I'd recommend as a first timer. but you can slowly build up confidence and knowledge by starting small. every mechanic started with an oil change :)

@gerardeleby8792 Жыл бұрын

How much u charge for this work

@angelito3332 3 ай бұрын

Thank you zaiten, replaced my valve cover gasket on my 640i following this video, when removing valve cover the plastic piece that clips inside valve cover disconnected from valve cover, reinstalled valve cover without putting that plastic piece back on inside valve cover ! (Forgot about it) How important is that for functioning of the car ??? Thanks

@BONDGarage 3 ай бұрын

not sure which piece that would be. I don't remember moving anything over from inside the cover

@tjwohlrab5715 10 ай бұрын

How long does a job like this take? people on forums are saying 3-4 hours, But you and ECS both have a relativly uncut video and do it in less than an hour and make it look so easy

@BONDGarage 10 ай бұрын

I'd say 2-3 hours. a little longer if it's your first time.

@socommaster Жыл бұрын

Do you have to remove and reinstall spark plugs when replacement valve cover gasket?

@BONDGarage Жыл бұрын

can stay in place. but doesn't hurt to have a look at the condition

@socommaster Жыл бұрын

@@BONDGarage but dont you have to remove the coils and plugs to remove the cover?

@BONDGarage Жыл бұрын

@@socommaster coils yes, plugs no. they screw into the head

@socommaster Жыл бұрын

@@BONDGarage arent the plugs attached to the coils?

@BONDGarage Жыл бұрын

@@socommaster they snap on. just pull them out and you should be good to go

@heythere8190 Жыл бұрын

I replaced the valve cover gasket and as soon as i started the car I got a crankshaft position sensor code what can that be. Please help. Its my only car to get to work.

@BONDGarage Жыл бұрын

sorry for the late reply. did you sort it out? it seems completely unrelated. unless you didn't disconnect the battery and shorted something, it must be some electronic gremlin. even if something fell in, it would be noticeable but still wouldn't change the timing.

@heythere8190 Жыл бұрын

@@BONDGarage yes i did, ended up just changing the crankshaft sensor and it ended up going away. Thanks for the reply tho.

@BONDGarage Жыл бұрын

@@heythere8190 those are the worst when one part decides to die and it coincides with a repair you just did. glad it was an easy fix

@rohangreen2061 Жыл бұрын

Where is your shop located

@BONDGarage Жыл бұрын

I'm shop-less lol just operating out of the homely garage

@SeedfulMusic 10 ай бұрын

Did you buy a whole new valve cover?? I thought you were replacing the valve cover gasket?

@BONDGarage 9 ай бұрын

I did. didn't wanted to deal with the breather valve so I just changed the whole thing to have peace for the longest possible time. may have not been necessary though. you can also just use the old one if theres no problem with it.

@305vlogz2 9 ай бұрын

My issue is I forget how to put everything back, maybe I should record myself 🤔

@BONDGarage 9 ай бұрын

do it! you wont believe how often I have to check back on my own videos to see what went where when working on something the first time. you'll thank yourself later