Maraming salamat din sa inyong supporta sir sa ating KZfaq channel makakaasa po kayong sa susunod pang mga tutorial maraming kayong mapupulot na kaalaman. God bless po.

Thank you rin Boss sa supporta sa ating channel. God bless po

@@autofixgarage5438 maraming salamat den po sir

Yes all 4D56 single overhead camshaft are the same pressure. Thank you sir. To God be all the glory.

@@autofixgarage5438 thanks for replying sir, subscribing now. one more question, is it necessary to use teflon before installing back each injectors to the engine? i did not notice you did that

@@imussewingpartskapatid no need to use Teflon sir.

The adjusting shim sir was given by my friend from calibration center I don't know where they bought, the injector tester is Bosh.

Yes sir 151.9 bars - 161.8 bars for 4D56 single overhead camshaft. God bless.

Parehong maganda at subok na yung denso at zexel sir, pero this time zexel ang ginamit ko.

Uminit ung makina pero hindi nagoverheat Sir normal lang na uminit ung makina dahil napalitan ng magandang brand na Nozzle tips kaya maganda ang andar ng makina.

Wala pong copper seal sa injector na yan boss, napalitan ko yung aluminum gasket ng fuel return hindi ko na po isinama sa video, Thanks po

I'm not sure kung pareho lang yung dalawa, tulad ng Nozzle tips ng injector ng 4D56 single overhead camshaft MIMD620189 or MIMD620889 original part number yan sir choose which is available. God bless po.

Kapag under pressure hindi maganda ang spray pattern ng injectors, hindi pa umabot sa ideal na pressure naginject na ng fuel si injector, kaya maraming epekto,black smoke,fuel knock,low power etc, kapag high pressure naman low power ang makina dahil insufficient yong fuel na kailangan nyan sunogin,at iba pang symptoms. Sana makatulong Boss, maraming salamat sa supporta sa ating channel, God bless you always.

@@autofixgarage5438 maraming salamat Po.

Your welcome Boss

@@autofixgarage5438 Wow, ang galing nyo sir. Ito ang mga info na kailangan ko before i start my next butingting project. ito malamang ang nangyari sa advi ko nung last ko pinalinis injectors. Ask na din sir if how much usual fee palinis at pagset sa standard setting per injector. Location nyo po?

Use the coke in can of softdrink Boss cut it to a small piece.

@@autofixgarage5438 thanks boss :)

Puedeng puede sana sir pero wala ako sa Pinas, salamat sa tiwala, To God be all the glory!

Pareho lang sir, MIMD620189 or MIMD620889

Parehas din poba ito sa standard pressure ng Innova 2018 or ano po Ang dapat or puwede napoba matanong Kay Pareng google Ang mga standard pressure ng mga fuel injector calibration? More power Kabayan watching from Al Khafji Saudi Arabia 👍

The same pressure lang sir sa may turbo or without turbo.

Diesel fuel Boss puede na as lubricant

Sa ngayon sir wala ako mairecommend na seller, yung shim ko bigay lang ng friend ko na nagwowork sa calibration center, minsan kapag wala akong shim cut ako ng coke in can yung gamit ko.Maraming salamat boss.

Thanks boss

Your welcome, salamat din sayo boss. God bless.

Wala pa sir, in God's will. Thanks

The same outside diameter of adjusting shim sir, you can use the thickness of shim from 0.01 and up to adjust the injector nozzles pressure 😀.

We're not hiring boss

Kulang sir kung ang pressure ay 120 dapat nasa standard value.

I added 1pc adjusting shim sir until it reach the standard pressure.

@@autofixgarage5438 anong psi po ung standard pressure ng sa 4d56 mitsu adventure?

Ang standard opening pressure sir ay from 151.9 Bar to 161.8 Bar, God bless po.

​@@autofixgarage5438napa pindot tuloy Ako Ng Kalembang 👍 meron Ako napanood inipit or pinaiksi Naman niya ang spring para makuha ang tamang pressure calibration... Ok lang poba ito keep watching and support from Al Khafji Saudi Arabia...

​@@autofixgarage5438Sir mga ilang odometer or year masasabi puwede na magpalinis Ng fuel injector salamat. Meron Ako Innova 2018, 120km odometer