How To CHECK parking SENSOR?

Рет қаралды 259,500

DIY World

2 жыл бұрын

How To CHECK parking SENSOR? Need only multimeter, check parking sensor is good or bad. Simply DIY ...

Пікірлер: 20

@kawasakiinitful Жыл бұрын

thanks for posting this i found one of my sensors had a small amount of physical damage and indeed tested faulty but i guess not all faulty ones have visible damage . liked and subscribed 👌

@ochoamanuel5710 Жыл бұрын

Thanks for share....really thaks

@JasonfromMinnesota 8 ай бұрын

thanks for posting

@brak7878 6 ай бұрын

Hello, one of the rear sensors is defective. If I replace it with another brand, will it be compatible with the others and work?

@thingserik7269 Жыл бұрын

I found 3 different sensors on rockauto that look identical to mine. The difference appears to be the plastic patterns inside the receptacle(which would have to be modified to seat the plug).Are there also varying outputs that would not match up with my car? I feel like trying a $5 version vs a $28 one advertised for my specific car from a proprietary source.

@EusGeorge 8 ай бұрын

Hi, they are ultrasonic sensor or electromagnetic?

@deanjagger1190 7 ай бұрын

Seems to be easy enough to do. How about testing the moguals?

@deanjagger1190 7 ай бұрын

My back up sensors work, but the blind spot doesn't work. They both look in good shape. I wonder how to get the conecters of, this was the problem on checking the out. Does anyone know how since the clips are so small?

@nan_8883 4 ай бұрын

have 3 terminal.you have check 2 terminal..other 1 terminal use for what?tq

@muntderpubg2258 Жыл бұрын

OEM?

@videobreakers-uq4bh 7 ай бұрын

Don't use music for background

@justaskinquestions 5 ай бұрын

Or mute button? The music is pry the free youtube stuff. I like it better than dead air. Jmo

@Certainblind 6 ай бұрын

Kamay lng nakikita ko😅

@makestuffwork9205 Жыл бұрын

I have two sensors that measure 10k resistance but are still faulty.

@vilhelm8166 Жыл бұрын

Could it be the connector, or maybe some wirering issue, bad ground or 12v to it. Because the two sensors should be fine if you get 10k ohm

@makestuffwork9205 Жыл бұрын

The wiring is good. If I put a good sensor on the same connector that the bad one was one then it works and clicks. I also have a merc scan tool that shows each sensor's distance information. So unfortunately bad sensors can still show 10k resistance but have a fault elsewhere.

@makestuffwork9205 Жыл бұрын

@myshitonyoutube 2 ай бұрын

@@makestuffwork9205 Yes, that's true. I also have 1 bad sensor out of 4 and they all show the same resistance.