Hallelujah, praise the Lord bless you amen. This did not work straight away yesterday evening, but this morning I tested the car and I couldn’t believe my ears, the rear reversing sensors now up and running and functioning in the way that they were designed to function. Bless you bless you bless you

Amazing, worked directly after the first try. Thank you for saving me some money!

It worked !! Thank you very much for posting this

Gracias pensé que era algo más grave ,lo hice y funcionaron de nuevo.para el audi A4 👍👍 saludos desde Chile.

thank you! worked on 2nd try! 2016 Rav4

I did this by spraying WD40 and it worked for a few days only, after that I did get random beeps again, I also noticed one of the sensors was partly peeling off paint, about 1/3 of circle area like the sensor of the display picture of this video, I have repainted the whole circle area of the sensor with an even coat and now is working properly.

Worked on first attempt clio 2015! Thanks mate

Just did mine on a Jag, I sprayed once left for 5 mins and sprayed again, now working perfectly, great tip 👌

Worked first time on my wife’s Kuga. It’s been driving her nuts for months. Garage said whole bumper had to be removed to replace it. £££££££££

Worked first time on my 2018 Renault Clio 👌🏼 thanks!

WD 40 works for me just 5 minutes ago after watching another video, thanks

Tebrikler. Bunu deneyeceğim.🎉

it really helped

2014 Mini - five minutes - sorted. Thanks JFK!!!!

Thought ide share. Same happened on my 2018 vw tiguan , but before one sends it to garage please try this yourself, as i did today by pure accident and it fixed issue in your vid. Go to screen above steering wheel and turn off all assists, on my car it has two including lane assist, click those boxes so no tick shows, i waited 6 hours to go for drive (as i had an issue and manual says switch off front assists, so i did), but just for whatever reason i clicked on front assists and BINGO Wahooooo it reset itself. Still can't believe it but if that doesn't work yes you need to take it to the garage and get fixed. I forgot to mention i cleaned all my sensors but still error front pilot showed on screen and flashing at the P button. All fixed and with by reading my manual and by pure luck. Very happy and hope this helps. Remember i only turned off assists as i had a problem and manual advised me to do so, they thankfully are back on now and i saved a fortune.

would a electrical spray cleaner also do

My vauxhall mokka does not beep at all and says need service. I would ideally want to avoid goong to vauxhall as i know thats going to cost a lot more than necessary.... any ideas?

Wow it worked

There's also a parking sensor module for some reason when i unplug my reverse light bulb the sensor's start working very strange and i wish it was the other way round as i have an mot coming up soon.

It worked for my lexus rx 350 2010 model, 👏 thanks

Are you're reverse lights working? If not could be the reverse sensor switch.

Mine are not even making noise, tried the wd 40, no help, may be the module??

To know which sensor doesn't work, insert the key into ingnition and switch to position 2 then put the car into reverse. step out of the car and go to the parking sensors and touch each one individually and see which one is "sparkling" less than the other ones. You may have 1 or 2 or who knows maybe all (in which case you either have a wiring problem cuz u can't know which sensor is bad or they're all bad and need replacing). Its good to take them out from time to time (twice a year would be perfect) and clean with WD-40 or any other spray which doesn't leave residues, because you're driving on all sorts of roads starting from dusty ones to wet ones and all that mud is going to clout in the sockets and cause PDC to malfunction.

Yes it is good information just minutes.😅

Not working on mine. Pitty...

l had continuous beeb now after this hack lve got nothing so will probs have to remove the rear bumper and replace sensors

My caravelle T 6.1 front right sensor wont stop going off when nothing is near on the open road 😂 😤

Can someone please help me. My sensors are working intermittently. One moment they will act normal then the next time they will been continuously then another time they will do the close rapid beeping. Now all of this will happen when I’m not near any thing

After a heavy rainfall, rain seems to get inside the sensors and causes them to malfunction . A Couple of days of warm weather/direct sunlight usually fixes the issue or you can do what I did.. I used a portable vacuum (18v Milwaukee) I put the hose on the blower side of the vacuum and used a crevice attachment (this increases the speed of the air) and aimed it at each sensor while varying the angle of directed air and it worked. No direct contact between the vacuum attachment and car panels/bumbers.

Making mine not work is what I'm trying to do👍🏾😁

If this fix with WD40 dont work, you can turn the ignition on and put the car in reverse and walk back to the sensors and listen if they make a clicking noise. If they dont, they probably needs to be changed. Hope this helps somone. Have a great day yall 😊

I'll give it a try..... Take care of your car better. Wipe that DW40 off all the bumper area. A little sloppy but good idea how to fix

Does wd40 eats the paint?

If you guys want more efficiency and long time take wd40 waterproof

WHY does it work though???

A video to show a "fix" that dont work!!!!! How brilliant is that!! Took some thinking that did!!!

😂😂

Don’t work

🤡🤦🏼🤣

Left all that wd 40 all over the paint, running down the bumper. 🤦‍♂️

Hi can wd 40 damage car paint ?