Thank you! I have no idea what I’m doing but I’m glad to know how to build these and how they differ.

Great info. No fluff, straight to the point. Thanks...

Very good information! Thanks!

Well done, it was technical, an informative for beginners

Thanks a lot this help a bunch. I do arrow building with my compound and just making sure same rule apply when it comes to adding weight 👍

Beat explaining on arrows I’ve seen thanks man

Great info Thanks so much!

Great video - thanks!!

Excelente video, Yo utilizo casi los mismos parámetros. Solo adicionaría que puedes adicionar peso en la retaguardia para reducir la flexibilidad de la flecha. Gracias por le explicación Great video, I use the same parameters . I just would like to add: it is possible to increment the stiffness of a shaft, adding weight on the rear of the arrows. Thanks a lot for the explanation.

Interesting shooting 70" 30lbs, every chart I have looked at says 500 spine is what I should be using?

I build my own wood arrows. I always choose the highest spine, 80-85. 75-80 would work too but I like heaviest spined cedar arrows I can get. Thick ones too ,23/64. They seem to shoot really quiet and hit hard. I shoot them out of a #35 bow all the way up to a #65 bow. A 135 grain zwickey 2-blade up front. I stain them and dip them into clear blue lacquer twice to add a little extra weight. I think everyone should start out with some cedar arrows and then eventually transition to carbon or aluminum. New cedar arrows are strong. Old ones that have been laying around forever seem to get a little more brittle if you hit something hard. Good thing about practicing with cedar is that when you switch to carbon arrows, it's amazing how accurate the carbon arrows shoot..

that's eexcellent ~ all the best~ ;)

Thanks!

Thank you

Thank you for this (and, whew, thank goodness you put on that flannel shirt!) Seriously, though. I AM a reader; where is your article, too?

Ima begginer at archery, using a recruve bow, my draw length is 24" inches, i use a 20-25 lbs bow draw weight...what arrows should i be using and spine? Right now i use cheap wooden ones with plastic feltching

I measured my draw length at 29 inches. My longbow has 25 lbs printed on it, but using a scale, at 29 inches draw, the scale reads 26.5 pounds. I have 100g and 150g practice points. Arrow length is 32 inches. But I have also tried 30", 31" and 34" arrows. I'm just a beginner and trying to research arrows. But it's a mystery shrouded in fog. I feel like 400 or 500 spine, 100g, 32 inch arrows hit the 10 ring more often. If I go to 150g points, I tend to shoot low, hit the bottom on the 9 ring. 4 inch turkey feathers too. Any advice is welcome.

I'm longbow and recurve. 45#. 31" arrows. I only have the 400 spine arrows available. What do I need to do to make this work

So if im pulling 58/60lb and have 150g tips then I’ll want a spine that’s 300? If im understanding you correctly? I’m still iffy on the spine grains, lower the number the stiffer it is yes? Did I get that correctly?

Is there a place where we can find the article?

What arrow lenght for 27" draw length

Thanks so much for giving some rough starting points, I'm having some trouble deciding which arrows to buy for this traditional longbow with no rest (the Alibow takedown English longbow). So an arrow should be weaker if the rest is cut past center, but it still has a rest, just not a wire rest. Or do you mean with a wire rest, because that would make more sense to me. But I've heard that a trad bow without a rest should also be a bit softer because the arrow has to bend around the handle of the bow itself. The bow is 20lb and I'm going to try some 30" 1000sp arrows with 80gr points. I can take off 20gr with the break off weights and same with the 120gr points I have. Is that a good starting point?

I chronographed a Flemish string with 4 yarn puffs vs 4 string leeches and the speed loss was, virtually, identical-4.5 fps loss. The yarns puffs were significantly lighter. The leeches, despite being heavier, did not affect speed more than the puffs, but were, in my setup, quieter. This reminds me of feathers vs vanes; despite vanes being much heavier than feathers and the intitial speed being identical....the vanes will outcast( shoot further) than feathers.

Does this include wooden arrows?

Where are you (Shop) located?

LOL the flannel

Brother..... my dumbass understood this! Thank you!

You said by adding weight, it bumps you up to a higher spine. I don't understand I thought by adding weight you reduce the spine?

Is a gamegetter, 31.5" long, 500 spine with a 100 grain glued in tip, too stiff for a 37# recurve bow at 29" draw length? Could I cut it and add more weight on the tips, to keep it flexible enough? Thanks!

the video starts at 6:25.

What does wearing a flannel shirt or not have to do with it?