I run 2200 3S packs on trail hikes. I get about a hour and a half out of them. But I’m old, slow and broken so my hikes are longer time wise than distance wise.

I'm just getting into crawling and trailing and never thought about what different batteries could do for the type of trailing I want to do. Great video! 👍

Lol I started out soldering nicad cells together and used a board with lightbulbs to plug into to discharge lol 😂 how far they have came since 2002

Awesomeness! How about a vid on battery connectors?

With an rc4wd I run a 3s 5000 because the body is such a pain to get off, and the weight doesn't matter. Thanks for posting.

5500 50c 3s in my scx10ii lasts 2 hrs, even running trails in about an 1"1/2 of snow ,that works good for me

I primarily run 5-6000 mAh, 2&3s mostly. I mainly do this to achieve a 3 hour runtime goal in my rigs. I run Floureon, Turnigy, etc.

I really like the venom 2200 3s. I get about an hour of trailing/crawling. Not really into the comp end of things. Just enjoy trailing and seeing what I can do and get better at it. Central CT with a trx 4 defender. Stock motor (when she goes I'm goin holmes), hw 1080 esc, 20kg steering servo, 45t spur, 9t pinion. Beadlocks/ hyrax. Some brass up front. Hilly, slick rock, ledge, riverbeds, little mud. Great video thank you.

I Always love how informative your videos are. I run Gens Ace 5200 3s packs in my SCX10.2 and my Wraith. They are a bit slimmer profile and about the size of a standard hard pack 2s. I'm just trailing with them.

Another quality video full of information. #GreyBeardGang

At the shop i work at, we prefer the gens ace packs. Far less returns over other brands. We sell a ton of the 3300 3 cell packs for most crawling setups. I would get 3.5 hours in a stock scx10 2. Thanks for informative video.

Personally, I run both. I run a shorty on the front of my TRX4 and a large, high capacity pack in the normal battery tray. And I also run (for now) a 3s shorty and a large capacity 2s. It has worked decent thus far, but I love 3s as opposed to 2s simply because I run my servo at 7.4V and experience brown outs with 2s.

Great VID..🤙🤙 I'm running brushed in al my rigs..using GenAce 2s 5000mah (50c)..just hobby trails. Gmade GOM Axial scx10.2 Cross-rc kc6e And a home build 6x6

I like 5200mAh 7.4v 80c 2s1p I don’t really know if that’s a good one but I like it for more run time for trails.

Very informative. I run Protek 3600mah 3s 100c LiHiv batteries and I'm getting just as much run time as my buddies with 5000mah Lipo batteries. Maybe you could do a video on High Voltage batteries and how they compare to regular Lipo batteries.

This was the most help I have found on the net about this topic I found some 3900mah 45c 3s lipos on clearance I was on the fence about getting them cause I usually run 5000mah but after watching this I went ahead and got one thanks for the info keep up the good work.

I just switched to running 3s I just do a little trail running with a relatively heavy truck so far those Pro Tek 3s 3500 mah small packs have been perfect I usually run one with a second one as backup plenty of runtime for me

my rig is 1/16 summit with some upgrades i use a 2000mah 2s 35c venom pack love that battery

Great info John! Rock Racing wise, I’m using mostly 3s packs about 5000-5500mah and 65c packs for a 3000kv 550 canned motor. Depending on the main, I’ve gotten away with as little as 3000mah 3s packs, but it’s a gamble - but the weight savings is cool

I'm a fan of the graphene lipo's like the turnigy or Protekrc due to the 100+ c discharge rates, as this allows me to also use them for my FPV drones without having to purchase separate batteries for each hobby. (They're expensive enough hobbies as it is :D) Love the videos and I'm new to crawling, and really appreciate all the teaching your videos provide! (and the occasional pun!) Looking forward to my first Holmes Hobbies brushed purchase soon!

Idk really I’m a bigger fan of my big battery’s just cuz we can be out all day but I definitely see the advantage of the smaller batteries. I’m in the middle of looking at downsizing now cuz I can’t get my big ones into my rp power wagon body so we’ll see

540 21t 1080 esc 3s 9000mah 75c also works great in my construction vehicles.

I have 5kmah packs in my scale SCX Defender and rc4wd Hilux. Both are used for long drives with some rock crawling. I easily get 2 hours out of them. Sure beats the 1200mah nicad packs from my rc10 days.

I use a 2200mah 3s on all my trucks. Trail running mainly. I prefer my truck heavy though. I like how my suspension flexes with leafs. Not trying to impress people with anything

Very information packed video Jon, thanks again for sharing your vast expertise with us. Wicked video!! Having just gotten back into RC's & specifically Crawlers, in the last year & half I'm blown away by the battery's & electronics available. It's been a steep learning curve from what we were building & doing 30 years ago!! So honestly I'm an older dude still trying to sort out what'll work best in my scratchbuilt rigs, etc. That's just one of the reasons I run with Holmes products so often & very much appreciate your videos, thanks again Brother.

i run 5000 mah 3s packs and that lasted me for over 2 1/2 hours each. it’s awesome not having to worry about bringing extra batteries

Good review thanks. Trying to get my gigantic crawler out moving again. Been a long time. Forgot a lot about batteries and so much new stuff.

Great video. I have been into all forms of RC going back to the early 80's and I am still learning....LOL. Yes, keep the videos comming.

I have both sizes. I have a 2200 mah and a 5200 mah. I like to use the 5200 and keep the 2200 mah as a back up but still get a good long run time out of the 2200. 5200 is probably over kill but I hate carrying my rig off a trail. I run zeee in my redcat axe. They seem to do well so far. Thanks for the video. I learned something new today.

Venom fly 2200 30c packs, in scx10 ii. Have been working good. But like the sounds of the 3300 with higher c rating. I have some older 1300 35c. I am going to change connectors on them and try them out. The 2200s fit battery box sitting flat not on there side.

3S 50c 4,500 mAh HW system in a Trx4. Can get 3 hours on a trail walk. This exactly fits Trx4 battery tray.

I run 3s 4000-4500 mah I like the weight up front for hills

Prof . Holmes surely eat, sleep & crawl!😁

I run a max amps 3600 3s saddle pack on my trx-4. It's great because I can get about 3hrs of run time and mount it hella low on the rails. Not cheap but honestly at $89 it's not too expensive considering it's a true 100c pack. It's a little heavy (250 grams) but because it's mounted low and forward on the side rails it still has a very low cg and climbs, decends and sidehills equally well. Running saddle also allows you to get rid of the entire battery tray assembly. Also Max Amps has insanely good customer service. Definitely reccomend.

Great information as always John!

Been running 30-35c 3400 3s for a few years on my rigs. I mostly do crawling and G6 style stuff. It’s probably time to swap them out but they still balance so 🤞🤘

I run 3s 5ah packs for just running around and bashing. My logic behind this is it keep battery temps lower for running, I generally only need one battery so I won’t take an extra (gets me 1.5hr on a trx6 with puller pro 2700kv,) and it was only $4 more for the extra amp hour over the 3s 4ah traxxas battery.

I use a Venom 3S 3300mah 35C in my SCX10ii using a Crawlmaster 540 16T motor, I average 2h 09 per pack (shortest run 1h 36m, longest 3h 10m)

Nice

I use Gensace 2s and 3s but It really depends on where I’m at in elevation and type of weather. I have 3 U4 rigs and 12 crawlers . All of my rigs are brushless and they are running your 3300kv motor and esc.

Great video! New to the channel and just subbed. I'm a basher so I have a lot of high C batteries. I use PowerHobby for those and my smaller rigs I use Venom because of the interchangeable connectors.

What battery do I need for my gen8 axe redcat???? I want to buy the perfect one ??

My rig has twin motor on axles. One 60A Esc. The 800mah nimh pack only lasts 5 minutes. Upgrading to a 2s Li-on 3500mah pack. If that works out okay, I'll see. I may change out my esc to a Sabertooth. I need to scope the waveform of initial power to the motors to adjust instantaneous torque. I highly recommend a high quality pwm board. Part of my low duration power issue is my 20kg steering servo.

Thanks. This is the most confusing thing about the RC vehicles. I’m a 58year old engineer and I get brain fog, when I try to figure it,out. So about 6 or 7 years ago, I bought a new RTR Axial CRC Jeep Wrangler Unlimited. I then went nuts with the mods....all aluminum suspension, real hydraulic shocks, bead-locking rims and new bigger tires, additional LEDs etc. Shit I probably have $800 invested in that “toy.” Then, like many new hobbies, I got busy with some other things and it got set to the side. I haven’t run the Jeep in probably 5 years. Only have one battery - a two cell LiPo that fills the battery tray (about 2/3 the thickness of the big one in this video). It was like $110, and I never wished I had more (never ran out of juice before I stopped “playing” with it). That said, I assume it’s toast after sitting for so long. I’d like to get another, but I’m not a fanatic; will never run it for hours at a time. So if I can get a $50 that does what I personally get out of a $110 battery, I would be up for it. Anyhow, I’ll head up to the hobby / rc store later this week, but if anyone reads this and,would like to give me any suggestions, it would be greatly appreciated. Thanks again for posting.

Cool video.

Long trails I run a 6000mah 3s in my scx10ii my other rig has saddle trays and each hold a 3300mah 3s down low weight all I do is crawl or trail another good video man

Very informative dude thanks for that 👍 awesome video

Great Videos John, love the humor and out takes too! Hilarious! Please keep it up! I also would like to interject some info/experience into this conversation, I am one of the first U4 racers to run with Tobin and the gang here in SoCal, I followed your advise to Volt Up!!! Which wound up being the Best advise when racing U4. Your OG team driver Jake W., kicked ass in the mains, when he use to race with us and so I started listening to what you said...volt up! We all ran 2/3 cell Lipos, then I got into 2.2 Trophy class and jumped to 4s, everyone thought I was crazy and going to break parts, but my MattZilla custom Mantis chassis only had a certain area for the battery and I had to make the most of it. So it was a 2200 mah 4s lipo that powered a Gen 2 RX8 Tekin with the monster (1lb.) 4038 motor (motor 2000kV) on 4s with NanoTech's and a 10lbs.rig. I ran out of mah towards the end of long mains, those were the longest in history, (10 minutes, now longest are 8 minutes) and only because i had the volt cut off set, I now turn volt cut off on disable and remember not to run it down too far. So I like the low amp, high volt philosophy you preach, it really works for U4, with custom rigs, and with interiors/inserts in the way, I find that volting up is the way to go. One additional benefit is that amps bring heat, imo, so high discharge 2/3s lipos, are not better than the 4/5s option with low (cheaper) 20-30c lipos. I now run 5s on my UCFAB FIS 2.2 Trophy rig and 2200mah lipos, with an average of just 20-30c, so cheaper batteries too can let you spend more on programmable ESC's and motors. Investment in quality electronics can really make all the difference, you just have to take the time to learn the rig, electronics, and driving skills. Rant over....lol hope this helps.

I have that same rc here. Axail scx10 ii. i've been using Venom 4000 20c 2 cell. i get abut 2-3 hours on the trail so i usually take 2 batteries with me.

I run a castle mamba x with a 3800 kv in traxxas trx4 with a 1500 mah 4s gensace bashing battery

I run 450 Mil amp on 10 gate 5min course and trail running 2200 mil amp. Thanks for the input.

awesome. i'm going to get back into RC. pretty minor before but now...more durable/water proof, able to afford more, Lipo, run times etc. Looking at that trx-4 sport Traxxas. didn't know what batteries I want. this helped. I want to have fun...fun in snow/sand...not so much crawling major stuff and going 5-10 m/h. looking for more speed. wondered about run time. wasnt' that much fun in the past...but you guys are saying like 45 minutes plus easy....and full power until dead, no winding down for a few minutes with these lipos...cool

I honestly never thought about 3s in my rig. I always used a 5k 2s. I have lots of small 3s batteries for my boat. A little 2.2 geared right lasts about an hour and doesn't roll nearly as bad. Also my motor esc temps are lowered. Thanks

who else still runs NiMH?!?! i love them for the weight, hooked two 5000mah 6 cells together in parallel for 10,000mah. since i have a hand built metal bumper, winch, front mounted battery tray and zero weight in the back, i put the second battery in the rear and now my truck will crawl through anything. looks super realistic too. just way to far in to far into nimh batteries and need to wait until the majority dies and then i can switch to lipo, will have to completely re do my rig for the less weight though.

Bully 2 comp crawler, I run 11.1 3s 2200 mah 60c for free crawls at the beach and get a good 35-45 mins on 2 35 turn brushed. Axial wraith spawn, I run 11.1 3 s 5000 mah 60c for long haul trailing and rock racing. Pushing 5.5inch tall 2.2 tire takes a lot o juice.

Great video. I run a lectron 2s 5200 mah 50c in my scx10ii honcho with of course Holmes hobby torque master esc torque master motor on 2.2 tires. Not much is stock on it anymore and it's a heavy little rig. I only trail ride with my buddies and get around 2-2 1/2 hours out of it.

Simple and to the point thank you

How do you store/charge your batteries safely, John? While I do use Lipos, I have more NIMH because my BatSafe is at max capacity and I find NiMH to be "Good enough" for most of the crawling and bashing I do. In some cases, the slow death when NiMH are running out of juice is way more desirable than the instant death you get with Lipos - especially when you're on a trail that's less than ideal to stop and change a battery on.

Awesome info and video! I typically use Turnigy & Hobbystar 3S LiPos from 3500-4600mAh.

Wow thank you for the video. Helped me a lot! I use 5000mah with 20c discharge rate and I find it so good. I just play around the backyard. Never tried to bash it coz I love slow crawling.

Thanks for this. Fun run I have both 2200 (1.5 hour) and a 3500 (2.5+ hours) 35c's. Gens and Pulse brands. Now converting a scx10 to a comp so more than likely run your suggestions. Thanks again. #HolmesAllDay

I use a powerhobby 5200mah 50c 3s lipo on my scx10.2 i do mostly fun run g6 with friends. I use a hobbywing axe brushless combo

I like 2200 mah 3s packs.

Thunder powers were always the best lipos with a 6c charge rate they are incredible. They pack insane punch as well. Your going to pay but there packs are no joke. Thinderpower do to have balance leads and get way way more then 30 cycles. What thunder powers did you run couldnt of been there high end packs cause those go forever and have over 100c discharge.

Hey John, great video! Would you recommend running batteries in series or parallel ? Maybe a part 2 to this video ??

Very informative thank you so much

John, I'm one of the latest ones in this corner of the Hobby who's switched from NiMH to LiPo!!! That was a Year and a half ago! I still Run NiMH sometimes... When you're Me (and I hope to God that nobody has it THIS bad), it's really about cost. I would run Gens Ace.... IF I could afford them. The name escapes me at the moment but I've found a Brand in the Budget range ($15-25 2S, $20-40 3S!!!), that have been quite good, well made, and serves any purposes that I may have! I've never Run a 3S in a Crawler!! 😱 I realize that is scandalous in this Crowd, but again... Cost. 😔 I have ONE 3S Batry... 1200 mAh. Got it with a Foam Core Board, FliteTest Aircraft from a Generous Person. I MAY try it in my Wraith, since it's Built for Speed. 👍👍 Very Educational as USUAL John! Thanks. Carmine 🚂 🚙 SSGT USAF Ret. (disabled)

I use a 2s 5000mah 30c pack I have a trail master sport 35t in my scx10 With 14/87 gearing I can pull 60degree angle with minimal wheel spin

I was at The Fix (12h, Europe, 2017) with a SCX10 (35T, too slow geared, old lipos) and with a 2s 6.600mAh i got aboud an hour of runtime. lipos wear really bad and the motor was hot as hell... Then i switched to brushless (Mamba X, 2280KV on 3s) and on the first trailrun/walk my 3s 2.200mAh was empty after 7.7km - i felt like i was entering a new world, runtime- and rangewise.

Great video and new subscriber here. For trail fun I use a 7600 mah 2s in my trx bronco, it goes for a 4 or 5 hours 😆

Informative and entertaining 👍🏻

Always great info 🤙🤙🤙

Thanks for the info. Thanks for the look 😊

Love the Gen Ace lipos!

tattu makes a really good 4s for quads i have 20 of them i fly but now i use them for crawling lol.

5200 50c 3s I use in my axe edition I get 3 hrs of crawl time. Maybe more. It definitely isn’t as big as that big old block battery you have here in the video tho.

I use Protek 3600 mah LIHV batteries.

I’m new to the RC world but I have seen some videos of batteries that catch on fire and almost like blow up what can I do to prevent that from happening to me

My Bomber "browns out," as you said, when my 3800 mah 3s 45c voltage gets below 3.7v per cell. Thanks for the tip I wasn't sure what to do to fix it.

4:30 I've heard that a lot.

just a curiosity Could you put a Full Metal Front and Rear Axle for Axial RBX10 Ryft 1/10 RC Cralwer, car improvement parts, accessories but let the comma be 2.2

I run NIMH. I dont have to worry about water ingress into my Battery when I am chassis deep in the middle of a River and since I only use Brushed motors I don't need to worry about amperage delivery and since they are heavier.. You don't need wheel weights to keep the front end down when running up hill.

So sorry but i just have to: John Holmes 😂😂🤣🤣

Always good info,, good stuff brother

Hey John, do you have a preference in what make of battery you use?

should talk about graphene!

Hey John, I do trail/crawling. I use the Protek 3600mah 100c Lihv. Not a in size, I probably get about an hour. Depends on what vehicle and what motor. Great video! I'm always ready to listen to what you have to say. How's the leg doing? 🤓🇺🇸☝️

I run Helios 1500mah 50c 3s batteries and still get 3-3.5 hours out of 1 battery on a 1800kv fusion pro motor

Hi Holmes! I just bought a SCX10.2. In my country is very difficult to find batteries. I'll use the truck very quite. No competition. Is good a 7.2V 3000mAh NIMH pack? I'm scared of LIPO batteries. Thank you for your videos and your help!!

nicely explained. What would be the downside of using 6s pack with 1900kV sensored motor?

I run 3s 5200 mah last about two hours on my gen 8

What’s the best for the longest run time on a single battery for just crawling and trail for fun on a red cat gen8

I use a gensace adventure 3s 3600mah battery’s I get like 2+ hours of runtime with my style of driving.

What battery should I get for my bully Moa 2 rtr

Hello i have crawel with hobbywing 1080 esc and motor 550 large 34t my car is heavy but good ballance so i find battery 3s 3500mah 50c i use it 1 time with 1 esc econmy from china and is burn is 5 minuts so my question is : Can i use with hobbywing 1080 battery 3s 3500 mah 50c or is to big and risk burn eesc ?? Battery is not heavy and in car feet good and ballance ok great your video

I need a bigger battery for my rock force what do you recommend

i use 3s 4000 mah to 5500mah batteries on my crawlers lasts up to 2 hours for what i do always carry a spare just in case

hey John, very good informations, thx - what is your favorite joice / Combo for the whole electronic? ESC - Motor - Servo - Battery? and it is very hard to get some Holmes Hobbies Products in Germany … can you help?

Doesn't more weight = more grip when crawling ? I understand using a smaller battery to help keep the center of gravity down and trying not to make it top heavy but surely more weight lower down ( wheel weights for example ) will help your tyres to grab on, that's simple traction theory...

for trails i like to run a 4400 25c in my scx10iii is that a good choice?