Wow, awesome video. I have never cleaned my 5 yr old Kona close to this thorough and I am very excited to see what it could actually look like again. Thanks for posting.

I don't have an air-compressor as you do, but I use an electric leaf blower to dry off those hard to dry places on my bike.

So I've watched videos of a Craig Ferguson interview, a ship sinking, a bird get sucked into a jet engine, a bike tuning video, some sourcefed clips, and the majority of two football games online today... and this is still the best video I've seen. My ride's clean at this moment and I'm very tempted to re-clean. Thank you! And subscribed.

Clint thanks for all the MTB tips and videos. Very helpful! Leaf blowers work great for drying dirt bikes and mountain bikes for people without a compressor. I use a simple 24v battery powered blower.

I can’t afford a compressor so I use the wife’s hair dryer instead. Stick it on cold setting and it works a treat 🤙🏼

Thank you. Simply thank you. I watched both "clean" videos & I was able to wash both my bikes - my new (to me!) road bike & mtn bike, which, to my chagrin, I realized as I was washing today I have not washed since buying her earlier this year! Most of the equipment I was able to get @ my local $1 store, and I used an old toothbrush to get in the chain & gear areas. What a difference! Still learning here, but thanks to you, felt like I knew what I was doing!

A very well done movie - thank you! All over the world bikes get muddy, and all over the world there is a wife not happy with the oily mud under your feet when the bike is clean and the sole of your shoe is filthy - I love your comment on this!

Pretty dirty? That bike is clean compared to mine. $5 bike from a garage sale, been through mud, sand, salty water, dirt. Never been washed, owned for 4 years. That's what I call a 'dirty' bike, and that's why I clicked on this video... Hahah, helped heaps! Cheers

Great vid, only tip is to say what products are as brand names (like clean green) aren't useful to people who don't live in the same country, needed to google to find out what it was. Other than that great guide, thanks for making it.

Nice video. I think it's a good idea to bag the rear break disk and calliper when cleaning the drive train. Keep the breaks nice and crisp and free from contamination.

I use a leaf blower vac to dry my motorcycle and it works great. I'm sure it would work on a bike also. Thanks for posting.

Terrific demonstration video. I very much liked how you showed each item used in the cleaning process at the outset for those of us needing to make a shopping list. Well Done!!!

I owe you a beer, Gibbs. Just got into the sport, and taking care of my investment is a big deal to me. Glad we're on the same page, and happier that you made a video about it. Cheers, bro.

+William Smith, you do not have to lube the shocks. This gets done when doing the routine air sleeve maintenance (rear shock) and oil change (front shock). +Asim dahal, this is the same cleaning method I use on both my mountain bikes, my cyclocross bike, and my road bike.

i am new on this and just thinking on cleaning the bike takes more than 15 min. you are brilliant!!! after you explain it, peace of cake !!! thanks for taking the time bro!!! saludos from Puerto Rico!!!

I used to be an avid mountainbiker and was a cleaning freak just like you. I had to quit racing because of health issues, so now just ride for recreation. Back then I used the exact same routing when cleaning my bikes, except for the compressed air because I didn't have a compressor. And yes, my bolts did rust... Now I am very less fanatic about cleaning. And it does wear out faster now that it has gunk all over it, despite being used less hard... Really good video, thx for putting it online!

This video is great. Very informative. Thanks so much for doing this video.

like the use of a inner tube as a chain protector

Simple green for simple cleaning. Simple green is also the best car engine cleaner/degreser. Thanks Clint for the simple video. Cheers!

@NoEcologyNoEconomy, see my follow-up video "How to clean a bicycle in about 15 minute-Part 2".

"Cars are so yesterday, bikes are the future!"

best video on the topic that I have seen. Thanks a lot.

Thanks for this video. I had not really cleaned my new bike very well since I got it. I followed the video step by step and my Norco Threshold Cross is sparkling. Got the Park chain cleaner and brush...worked awesome. Thanks very much!!!

I bought a road bike last week and was a little concerned about the maintenance. But not any more! Thanks for taking the time to make this video!

Great video. This method works very well. I could not find my attachment for my air compressor, so I ended up using my shop vac (blower part) and it worked great!

Minute 8:00 a squirrel going up the roof :D

Thanks for the video! I'm just getting back into biking to lose weight and rode my bike more in the month of June than I have rode in my life. My bike is extremely dirty right now and plan on using this as a guide to get it cleaned today

I am just getting into bicycling touring. I am commuting to work in order to train and encounter all kinds of weather. I really appreciate your very informative video and have added this cleaning regime to my maintenance schedule. Thank you!

I live in Georgia, so your 'pretty dirty' is my 'I'm just going down the road to a friends,back in an hour' xD lol

Good video but only for those who lives in his own house and has a lawn)

@Jimmyhendrixism, see my follow-up video "How to clean a bicycle in about 15 minute-Part 2"

I respect people, who care about their own stuff. Glint, you're good owner!

Nice job there. But where I live the bike trails are crushed limestone and all that effort would be wasted in about 5 seconds on the trail. That "kitty litter" stuff is just awful and gets in everything on a bike. The most effort I might spend is cleaning the chain, and the rest just gets a quick wipe-down since it'll get caked again without even trying. A wash at this level might be done only once or twice a year such as before garaging the bike for the winter.

SQUIRL ON THE ROOF BEHIND HIM AT 8:00

This is a "I'm getting ready to give my bike a photoshoot" type of clean up. Very thorough, nice video! Personally, I just rinse off with a hose, wipe the drivetrain clean (getting the stuff that didn't come off in the spray), dry, and relube chain. If I've got the time, I wipe down the bike after with a wet rag to get the stains off. That's a cleaning that I'll do for a weekly/standard maintenance.

Jonathan, many times a chain will rust if allowed to air dry so I would at least dry it with a rag or paper towel. You'll also get some rust inside bolts like stem & water bottle holder bolts. I recommend that you towel dry the bike as much as possible. But leaving some water on to dry isn't going to hurt. I live in Florida where the humidity is extremely high in the summer so water tends to sit much longer than in an arid environment. That's why I use a compressor like I do.

I just started riding. I live in the desert so after my first bike ride, my bike was covered with dust. Do I have to clean it after every ride? :\

I'll have to use my sister's hair dryer!

Thanks Clint, I've been letting the bike shop take care of cleaning my road bike and waited little too long this time. Now I am out a front derailer due to seize up. Thanks to your videos I think I can handle this for both the mountain and road bike.

A big thank you from Germany. Just started with mountain-biking and your video was very helpful.

Simple Green as in the all purpose cleaner?

Mention: Dont do this in direct sunlight, it will dry whatever you washed in seconds... Also canned air works if you dont have a $500+ air compressor.

Great, I like the way you clean your bike: the chain first, and the frame afterward. Thanks a lot!

So glad I found your channel. I know this is an older vid, but I'm just getting into mountain biking and I do love to take really good care of my equipment. Thanks for the information.

Yes a squirrel 8 min mark on fence and then goes on roof

8:00 da çatıya sincap çıkıyor

thanks clint this was very helpful. I'm just getting back to mtbing again. I used to clean my bike for about an hour or two, but now being married with a son doesn't give me that priviledge so this is definitely a great tip. thanks

@Offtheheezay95, sealed bearings today are pretty durable. All you need to do to check is remove the wheels and turn the axle, checking for friction. If the bearings feel smooth with no hesitation or "crunchiness", you're good. If not, you can order Enduro bearings from your LBS or online, and they're not difficult to change. All this assumes you have sealed bearings. If they are loose bearings they all you need to do is repack them.

Or, you take your bike to the bike shop and forget about all the bottles and brushes and chain cleaners...

Don't have a wife ! That's why I got a bike !

I brought home a Specialized FSR epic expert carbon today from the store, it deserves a wash and clean everytime thanks for this video i apreciate it

Hi great instruction video .you have turned bike cleaning into a sience and removed almost all of the drudgery .thanks for sharing

honestly i was thnking of buying a bike and i want to start riding, although im a beginner and there is a long way till i actually get a bike, this is better than watching porn ..

I like to keep my bike dirty. Kind of like a mud bogging truck. Shows character ;)

Very comprehensive. Thanks Clint. Now, I must clean my bike....

I thought my bike was clean... Now I have to clean it again! Thanks for the tips

I liked your video man! Well done, but , I do not hink that spraying water on the crank or hubs will get water in it. It's maybe because you're a neet "freak" (In a good way), you , but thoses places, especially on bikes like yours are very well sealed. But, nice job man, like your bike!

I take my bike to a hand wash car wash. I power wash THE WHOLE bike. The fear of getting water-especially in a sealed bottom bracket is near impossible with todays bottom brackets and is impossible with completely sealed bottom brackets. I rotate the derailleur while spraying, which removes crud from it and the pulleys. I get home and spray acetone(finger nail polish remover) on the bike(technique I learned to dry flasks in my organic chem classes!). Then I use air from a scuba tank to dry the bikr. Lube as necessary. I've taken of bottom brackets after YEARS of doing this and they are still encassed in grease.

What a beautiful bike and an amazing cleaning technique! Awesome video man!

@deeman7030, you don't need to lube the fork and shock. But you do need do air sleeve maintenance on the shock every 30-50 hours of riding and change the fork oil (including the float fluid) every 30-50 hours of riding. It's the float fluid that keeps the shock shaft and fork stanchions lubed.

is that GT 85 stuff the same as WD40?

at 8:00 A SQUIRREL appears :)

@MrMCBvideo, you don't need to lube the suspension if you do the proper routine maintenance on the fox fork & shock (about every 30-50 hours of riding). The Fox Float Fluid that's used in the maintenance procedure provides the lube. In between the service intervals you just need to keep the stanchion tubes clean using isopropyl alcohol.

Connor, if you spray the chain with water after cleaning it with simple green then it will be fine. I always recommend a chain-specific cleaner but they can be more expensive so simple green is great for people on a budget.

Find the squirrel at 8:00-8:04

having work stand does not determine a serious cyclist or not!...this vid is awsome tho!

I just watched someone wash a mountain bike. I don't even own a mountain bike. Started watching mean while in Russia videos to this lol! Thank You KZfaq

this is and will always be THE BEST bike washing tutorial on the internet! haha i love it!!

WOULD WD-40 WORK FOR LUBING THE CHAINS?

i just throw mine in a lake for and hour with a rope tied too it. Then pull it out and it all clean. Just kidding. Even if my old bike sets on the wall rack, it still get very dirty. My motorcycle has been setting for 2 months. It looks like i went riding in a mud pit.

Thanks for the video. BIG thanks for listing the items you used to clean your bike at the end of the video!

Adrian, I make sure water isn't forced into the bearings. When I use the "stream" or "jet" mode on the nozzle I usually only use that on the chain and directly on the cassette (not at an angle, which could force water into the bearings). My Industry Nine wheels are over 3 years old and the bearings are still very smooth. Use a light spray (like "shower" mode) on the frame, and maybe something in between for things like derailleurs. I've been cleaning bikes like this for 15 years with no issues

Wow, that's more than I paid for my bike. Amazing how specialized life has become, even to wash a bike now uses up more resources than some small third world country. Nice vid though

Good cleaning, but you can use some ECO friendly stuff ! ;)

Cole, here are places you don't want to spray directly with a stream of water: hubs, headset and bottom bracket. The things to lube after cleaning are the chain, pedals and derailleurs. You can also lube the derailleur cables but you need to know a few tricks to do that. I lube my chain every ride or every other ride.

@WarpedDimensions, no, you don't need to clean after every ride. I would clean the drive train after every dozen rides or so. I've heard from people that ride in dusty areas a lot that they use an air compressor to blow dust off the bike after a ride. I would take a rag or paper towel with a little bit of degreaser (like Simple Green) and wipe down the chain (spinning the pedals backwards) and then lube the chain after every ride.

Good video... I don't have a compressor or a hose, as I am an apartment dweller, but the bucket of soapy water with brushes and a towel in the laundry room over the drain hole works fine as well.. about the same amount of time. Though I am surely not as thorough as you are. Cheers my friend!

This is a very useful video. I do not own a yard but i wash my bike in my tub. That worked pretty good so far for me, except that i was not using as many "tools" as you shown. Next time will give it a try. Thank you

@PhoenixShipYard, you can certainly do that. Honestly I usually forget until after I have cleaned the bike. But I've found that the gunk is so thick it stays clumped together and doesn't contaminate the clean bike so either way will work.

@vickedslava, if you clean the chain last you'll spray all the oil and dirt that accumulates on the chain onto the frame. If you're concerned about the dirt from the frame getting on the chain, just spray the chain off one more time after the cleaning is over.

Great video Clint! Those tools will make cleaning my bikes MUCH easier! Thanks!

I don't mountain bike, I only have a road bike. I have to say that bike looks awesome. I really like the paint scheme too. Also good job on mentioning not to jet water into the important areas especially the bottom bracket, some people fail to mention it and why not to. Nice video, bike and tips.

Excellent video, thanks for sharing this. I have to replace my chain and cassette every year with all the riding I do but want to know how to clean the drive train at least on a monthly basis. Your video is all I need to get going on this.

@Kwang RongPhotos, Prolink is a great lubricant. I don't use dry lubes because they don't last very long. They take more care when applying, too. I put lube on my chain before most rides and just being able to drip it on and go is more practical for me.

Holy crap Clint, a million and a half views! Awesome. I knew you had some popular bike video but no idea this big. Congrats bud.

I typically run Aspens on my FS 29er and love them. I used the Ignitor on the front when the trails are really dry and slippery but typically I just run Aspens front and rear. The Ardents are my favorite for rougher terrain.

I use a leaf blower to remove water on my bike and car after washing. It works great. Thanks for the tips.

Those are Maxxis Aspen tires. They're a very fast and surprisingly stable tire. They also do great tubeless.

These videos take a ton of work. Great job! This is SUPER helpful! Thanks for putting this together!

Great video! I will suggest simple green crystal. I use it on my bikes and i believe is much stronger then the regular simple green. Sometimes you don't even have to use a brush to clean the drivetrain.

I use a light setting on the nozzle, something like a shower, or even mist if you're worried about water penetrating pivots or bearings. This is no different from rain on your bike. If a bike is covered in mud (obviously mine wasn't in this video). There is simply no way of getting the bike clean without water. But yes, you must use care and not go crazy with a jet setting or any water forced in places you don't want it.

Mr. Fireworks, an air compressor is definitely not required. But once you have one you'll be surprised at how many uses you get out of it. Inflating tires as tubeless is probably the best uses. And blowing up my kids' pool floats is definitely high on the list.

That brings back memories of the velcro strips I had on my BMX bike. Definitely works.

I had never thought about using compressed air for drying! Thanks about the idea! There was few things that I'd do differently though: -Do not "jet" the cassette or apply cleaning products directly to it when it's attached to the hub. There is chance of ruining bearings. If you want to clean it without taking it off, just give it quick brush. When you want it properly clean, just take it off. -I personally prefer not using same brush for possibly oily surfaces and brakes.

Nice work Clint, liked it a lot. Just got myself a new 29er so good maintenance is the way to go. I'm making a short summary of this to pass on to my mtb-riding collegues. Cheers from the Netherlands!

Those are actually XTR pedals. They're probably 5 years old or more but are still super smooth. I've only done bearing maintenance on them one time.

I'm not sure what Mr. Proper is, but you can clean the frame with a small amount of dish washing soap in water. For the chain if you can't find something like Simple Green (found here in the U.S.), look at bicycle chain cleaning solution from companies like Finish Line, Park or Pedros.

I should have clarified in the video that if you have ANY grease on a brush then don't use it on the rotors. The brush I used was not used on a chain or pulleys but I didn't clarify that. Sorry. The best thing for the rotors is to put automotive brake clean on a clean paper towel and wipe them down. As far as compressed air, I only use it on the chain, cable bosses, and bolts like on the stem. I don't use it directly on bearings for the reason you stated.

@darentpainter09, those are Shimano XTR pedals, and the bike is a Niner Jet 9 RDO (2012). Niner just redesigned the aluminum Jet 9 which looks like a great bike too.

@phatair360, I've never had a problem with dish soap damaging tires. It's only on the tires for a minute or so. Tires need to be replaced at the very longest once each year. If you're riding regularly a rear tire will wear out in 6-8 months. If you're worried about cleaning products on tires just spray them off with water since they'll get dirty on the next ride anyway.