How to clean a Dual Tap Kegerator

Рет қаралды 21,694

7 жыл бұрын

I'm going to show you how to clean a Dual Tap Kegerator. Its pretty simple and you don't need any expensive equipment. Keeping a Kegerator clean is important. No one wants Skunky tasting beer. Cleaning the Kegerator lines and tap is really not to hard. I'll walk you through the steps and show you how to get it done. Join me.
Thank You so much for checking out the video.
__________________________________________________________________________________________
Please click the following link to follow Delmarva Backyard. I really appreciate your support, please share the video with your friends and family. bit.ly/DBackyard
__________________________________________________________________________________________
The following links are for additional information should you be interested in any of the products you have seen on the channel.
HIGHER QUALITY MEATS - www.hickmansmeats.com/
MASTERBUILT 30" ELECTRIC SMOKER- amzn.to/2og1SYl
WEBER SUMMIT 670 - amzn.to/2sHKFMj
REC TEC RT680 - amzn.to/2HzY1gT
WEBER 22" KETTLE - amzn.to/2HCizFk
IGRILL 2 - amzn.to/2EYpQRE
SLICING KNIFE - amzn.to/2sJxEBJ
BONING KNIFE - amzn.to/2CdaYOb
SLOW N SEAR - amzn.to/2sMFcnk
PREMIALA INJECTOR - amzn.to/2BKRjUC
ANOVA SOUS VIDE - amzn.to/2EUZVa4
NUWAVE AIR FRYER - amzn.to/2GHPcAn
CHEMEX COFFEE - amzn.to/2CJV1uH
VACUUM SEALER - amzn.to/2pBMhDa
VACUUM DAM (for liquids) BAGS - amzn.to/2G4S6zf
MEAT SHREDDERS (pulled pork)- amzn.to/2G2ijTf
CAMERA STUFF:
MAIN CAMERA - CANON 80D - amzn.to/2Cawbbv
SECONDARY CAMERA - CANON M3 - amzn.to/2ELKx3N
MAIN LENS - CANON EF 28MM - amzn.to/2ohRr6J
SECONDARY LENS - CANON EF 18-55 amzn.to/2ooIEPx
NIFTY FIFTY PHOTO LENS - amzn.to/2ugOrwL
CARBON FIBER TRIPOD - amzn.to/2pDEQL3
TRIPOD HEAD - MANFROTTO FLUID - amzn.to/2Hx1gFX
ON CAMERA MIC - RODE VIDEO MIC - amzn.to/2BI8Rkv
VOICE OVER MIC - RODE PROCASTER - amzn.to/2EKon24
JOBY 3K GORILLA POD - amzn.to/2GJ90U8
DJI MAVIC PRO DRONE - amzn.to/2Fztlfi
GEAR BAG - amzn.to/2pEAqDs
BEER STUFF:
BLICHMANN 7.5 G BOILERMAKER - amzn.to/2EVjUbX
FERMENTERS FAVORITE 10G MASH TUN - amzn.to/2sME6Ie
FERMENTASAURUS - amzn.to/2Fle4P5
PERLICK BEER FAUCET - amzn.to/2DSjQ8m
DUAL TAP KEGERATOR - amzn.to/2G8oMIa
__________________________________________________________________________________________
Music is either from youtube royalty free or
player.epidemicsound.com/#/
__________________________________________________________________________________________
Links above are a mixture of Amazon Affiliate Links as well as informative Links. We are a participant in the Amazon Services LLC Associates Program. The affiliates programs allows us to earn a small commission on any sale the comes from you clicking on the link. I greatly appreciate your support.

Пікірлер: 14

@markcochrum5398 2 жыл бұрын

Thanks for the info on the keg cleaning. I just got one so just learning.

@chrisconstantino520 2 жыл бұрын

I like the pump you use. Heading to lowes to make one up. My buddy and I have double kegerators but he always comes up to help clean mine. This time I'm on my own. Great video. Cheers

@IronCross82 5 жыл бұрын

Awesome video man thanks

@DelmarvaBackyard 5 жыл бұрын

Thanks, I appreciate the support.

@joycemolinar4040 2 жыл бұрын

Thank you it help

@ScooterTrashTactical Жыл бұрын

My EdgeStar never had the springs in the taps. I also took taps and couplers completely apart during my deep cleans so I could use food grade lube on all my o-rings etc... I like the auto handle return springs.

@DelmarvaBackyard Жыл бұрын

Thanks for watching and commenting

@edwardhill6945 Жыл бұрын

Good on you to show the correct orientation of the spring. I use the Intertap SS faucets on my double tap, & I’ve not seen a video til yours that shows the small end of the spring goes into the faucet.. You should also toss your disassembled faucets into the bucket of solution, & let them soak while you clean the lines. Not sure if you did that, I see the faucets were no longer on top of the keg when you spoke about “we’re getting turbulence “. I never bother disconnecting the beer line from the coupler, it’s not required. Just use a small screwdriver, or even a toothpick- push up the ball in the bottom of the coupler & leave the toothpick in place. You can now pump solution through the line, it will freely flow through, into the bucket with the ball held off it’s seat. The silicone “duckbill” in the CO2 line prevents any solution from entering the gas line. Lastly, after you’re all done, rub a tiny bit of lube onto the bottom gasket of the keg coupler. It will make reconnecting smooth, & you will never need to replace that gasket. It’s just food grade silicone lube, consistency of Vaseline, a tiny tube will last till you can’t drink beer anymore!😀

@DelmarvaBackyard Жыл бұрын

Awesome feedback. Thanks for watching Edward.

@jeffcarsello1725 4 жыл бұрын

Hey thanks for the video very good show.....but dude how many shoes do you guys have😄

@DelmarvaBackyard 4 жыл бұрын

Thats a bad joke around here. Tooooooo many. Your very observant. Thanks for watching.

@danjohnson05tx Жыл бұрын

Where did you get the brass fitting? Home Depot and Lowe’s don’t have a fine thread brass fitting in that diameter. They only have coarse threaded fittings.

@DelmarvaBackyard Жыл бұрын

Yeah most local stores don't carry this kind of stuff. I ordered it on Amazon. 🤷🏻‍♂️ Thanks for watching.

@johnskelton3215 3 жыл бұрын

Great video reference. I have that same style pump now. Having trouble finding the right fitting though to get the hose to hook directly into the shank on the top of the beer tower. You have any insight or links to the adapter(s) you used there? My hand pump line on that end ends in a male garden hose threads and I'd like to adapt from that to the shank ending. Thanks!