These cleaning/teardown videos are fantastic - I'd love to see more of them, especially one for standard double-action, swing-out-cylinder revolvers.

Muy bueno tu vídeo saludos desde Argentina

Just recently made my first AR 15 since I was discharged from the Army. While I was with 101st, I was issued a 240B but I always loved the M16A2 we had in Basic. I built an M16A4 clone to allow the use of optics but needed a cleaning kit. My VA Disabled status lets me get onto a nearby Marine base so I picked up a Otis cleaning kit for AR's there. It is so much better than the old school cleaning kits I used in the Army and it makes a world of difference

I have a Beretta Stampede (Uberti) .45 Colt. Purchased it in 2009 but unfortunately was discontinued. You did a great job in this video. I would like to add a couple of things that can assist in cleaning the weapon. First i shoot only copper jacketed ammo. The copper can be removed more easily by the Hoppes No. 9 Solvent, where i have never found a cleaning gun solvent that will break down lead fouling. When the solvent reacts with copper, the cleaning patch will have green residue, after setting for a while. Second, when cleaning ONLY the cylinder bores, i attach a brass (never steel) bore/cylinder brush to my hand drill. I soak the cylinder bores in solvent, and in VERY LOW rpms scrub the bores, moving the brush forward and rearward, keeping the bores wet. Being brass is a softer metal than steel the bores shouldn't be affected. But never use the drill cleaning method in the barrel. With it having lands and grooves, all types of scrubbing should be performed, in conjunction with them.

Don thanks for what you do here. I’ve learned so much! I had the chance to meet you at the NRA event in Indianapolis and you were very encouraging for someone like me that’s relatively new to learning about guns. Thanks again for all your help and education.

This is a very informative video and wonderful cleaning tips. Thanks a lot.

I own a Pietta 1873 and your video was very helpful as this is the 1st time for me to clean it. Thank you for the details!

Very helpful thank you sir.

I always learn something from your videos. Your bloopers are always funny too.

Great informative video thanks 😊

Great video - Thanks!

Really like these cleaning videos, Learned alot. You should really do more of them.

I'm writing a western and i wanted a character to disassemble, clean, and reassemble a Colt single action. This is enormously helpful.

Great video Pisano!!

Thanks Sootch

We used to use an old school shaving brush to put a light coat of oil on all the metal parts of the weapons in the army. Still works well to oil my guns after 44 years.

Can you do one on black powder revolver. thanks

Thanks for the detailed info.

Yep, I had to splurge a while back and get me an expensive genuine Colt SAA in 45LC. Beautiful gun! Thanks for the tips!

Got to have some range fun today with a ruger 45 colt awesome 👌🏻 👏

You did the best job of making it clear what you are doing and well lit. Now how about a complete tear down on the blackhawk and peacemaker? 😊😇

Wow. I can't remember the last time YT recommended me a Sootch, Guns'n'Biceps, MrHickock, etc, video. Something must be happening. And was a nice one to watch! Oh, and for whatever it's worth, each time I bought a revolver (this means a brand new one, albeit I'd have done it on a used one as well), I also opened the action box, I'm sorry for missing the right terms, it's been a while, my apologies, I'm talking about the lid on the side, usually right side, and cleaned the factory grease and crap in there as well, in one case "magically" turning a brand new revolver from "what's up?" and having me worried, to fully functional after being cleaned. Super easy this bit, with cottonswabs and rubbing alcohol. Then remember to re-lub those bits!! Cheers!

Good Video

Excellent video tutorial, makes me want to give my single actions a little attention.

Thanks Don you the master very good job

Pay extra attention to the forcing cone (back end of barrel) that's where the heaviest build up acures . Ps That Taylor is the finest Colt replica . SO BEAUTIFUL 🤠

Just picked up a Ruger Wrangler yesterday, it's like you knew!

To clean the forcing cone I use a solvent wetted bent barrel brush inserted into the forcing cone and forcibly wiggle it around scrubbing out the forcing cone. Then I clean the barrel.

Greetings from the PPRC great video, think I will clean my single six 22 today.🇺🇸

*sootch00* How's it going sootch, great tips, thank-you sir for taking the time to show us. GOD Bless brother.

Yeap ! Cleaning a an old single 6 is a religion all in to itself 😊.! Just watching you doing it relaxes one self 😁 !! 😎🤙

Great job cleaning, video was excellent 👍😎. I found a Taylor 45 the other day and just can't get it out of my head , most likely it's coming home 🇺🇸💪🙏

Happy late labour day, Grandpa Sootch.

👍😎🍺🍩

I sweat Hoppe's #9 !!!!!!!!!!!!!!!! Long Live the Republic Soocth00

I clicked the video just to watch some good single action porn. I never dreamed that I would learn anything, but that tied rag thing is a great idea! I am always on guard to protect my Standard Manufacturing Single Action.

Samuel Colt died in 1862, 11 years before the M1873 was introduced.

Single action revolver are cool guns, but they are obsolete right now, i would never use this kind of gun for personal or home defense.

Nota.1o.josue.ceara.