How To Clean And Seal Stamped Concrete

How To Clean And Seal Stamped Concrete | Sealer Recommendation

Рет қаралды 127,253

4 жыл бұрын

#Cleanconcrete #Sealconcrete #Stampedconcrete
In this video, I'm going to show you how to clean and seal a stamped concrete walkway.
This method of cleaning and sealing stamped concrete will also work for stamped patios, driveways, pool decks, pretty much all exterior stamped concrete.
It's important to clean your stamped concrete so the concrete sealer will adhere properly and not peel or flake off.
I'm going to show you how I clean my stamped concrete jobs and what I use to clean the concrete to remove the release powder.
It's also very important to use the right kind of stamped concrete sealer and know how to apply it.
I'll show you what I recommend for a sealer and how I apply it to the concrete.
LEARN HOW TO STAMP CONCRETE:
mike-day.mykajabi.com/offers/...
MY RECOMMENDED STAMPED CONCRETE SEALER:
amzn.to/2M6bErj
MY RECOMMENDED PUMP UP SPRAYER:
amzn.to/2LJIEq4
NON-SLIP ADDITIVE FOR SEALER (OPTIONAL)
amzn.to/31Jumvl
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
SPECIAL DEAL: Use Coupon Code EAC on all equipment and tools bought from Marshalltown's website and get 10% off the price plus FREE SHIPPING!!
MARSHALLTOWN POWER TROWELS:
marshalltown.com/power-trowels
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
marshalltown.com/concrete-sho...
MARSHALLTOWN CONCRETE TOOLS:
marshalltown.com/concrete
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete

Пікірлер: 125

@jamesmyers2087 2 жыл бұрын

Just seeing and utilizing your instructions now. Even with all the great info and advice, this was a steep learning curve for me. I’ve done simple walkways on our farm here no problem. But the stamping wasn’t a snap even with your crew making it look so easy. Trying to work your time table, I experimented on a small concrete landing for a set of steps I’m adding to our wraparound deck near our mud room. I had pretty fair luck mixing my own concrete in the first of 4 40”x40” sections. Stamped surprisingly well for a first attempt. But the second two both ended up too creamy and watery on the top and I stamped too soon. Not the same clean registration as the first. For the last one I used a 3,2,2 mixture and reduced the water to almost a paver mix. That really worked out well and started coming close to the results y’all were getting. I’m going to try to add some of the detail back to the two poorer stamped sections which will be more easily seen in front of the steps. With a grinder. I’m also conceding a big project would be out of my capabilities and I’m going to allow my goto professional contractor to use my stamps to do a patio sized pour I thought I’d try originally. I’ll just save my newfound “Mike instructed” stamp skills for the smaller walkway projects here for now. But this video series all made the difference between complete fail and moderate success. We all see our own mistakes more, but I think it’ll probably look pretty good once it’s sealed later this week. Thanks so much, Mike.

@richardallen468 2 жыл бұрын

Thanks Mike, I am going to seal five concrete Bird Baths I have, after many years of neglect by the previous owners. I know that your video was a much larger project than mine, I just needed some ideas in particular for cleaning the concrete. Having watched many videos, with the only mention about cleaning was “Clean the concrete”! I already knew that. Your mention of Dawn Dish Washing detergent was a huge eye opener, and made total sense. I have not done any concrete work since the school summer breaks, so forty plus years have passed! Thank you again,

@Carguy332 Жыл бұрын

Good work 🙏Got my husband a pressure washer for Father’s Day and now getting the sealer 😎😎

@TheSweetswed 4 жыл бұрын

Even though I work in Concrete and have seen most of this. I am still fairly new and love having these to refresh and learn. Great Vids

@MikeDayConcrete 4 жыл бұрын

Thank You!

@yeriquinonez463 2 жыл бұрын

Great video thanks mike Day looks great

@richardbotha777 Жыл бұрын

Thanks. Your videos and advice is the best.

@grimadventures1376 4 жыл бұрын

I'm new to the pressure washing game but rapidly learning. I see in a lot of forums that you are not suppose to use a surface cleaner on concrete less than 5 years old because it will wear down the cream. Can you do a video about this, explaining what that is and the proper way to clean newer pours? I have not been able able to find a video that goes into any depth on this subject.

@mattcollins6026 3 жыл бұрын

Thanks for the video. Our stamped concrete had an umbrella on it that was weighed down by a sandbag and the sand pulled the color out leaving white blotches. We used the powder with sealer to color in those spots and it came out a little darker. I'm about to reseal the concrete ,but was wondering if there is an easy way to bring that color closer (lighten it) to the rest of the concrete? Thank you.

@artperez1213 4 жыл бұрын

Looks good 👍👍👍👍👍

@sergerover9026 Жыл бұрын

Mike, Great work, and thank you for sharing this with us. Quick question: will this sealer and method also work for broom-finished concrete patio? The patio was poured couple of years ago and I’m north of you in Canada.

@wilhelmenns791 6 ай бұрын

Useful video , thx

@christopherhess9553 2 жыл бұрын

Nice work

@paytonmiller9695 2 жыл бұрын

Hello! We had concrete put around our pool about 4 years ago and we never sealed it. Any extra tips for "older" concrete?

@eaglealterministries 4 жыл бұрын

hey Mike, do I have to wait 24 hours to seal my concrete? Would it be ok to power wash around 6am and seal around 7pm if concrete looks totally dry on a hot day? Thanks

@adamy2911 Жыл бұрын

Thanks for the helpful video, Mike. Does it matter if you use a roller instead of the sprayer to apply the sealer?

@426Kimmy 2 жыл бұрын

This is such a great video! I'm a DIY lol so love this. My contractor used my weedeater diesal fuel with 2-stroke oil in it as rubber stamp release agent 3 weeks ago. Im ready to acid stain awaiting the proper cure time but test spot came out yellow instead of walnut. Can I use dawn like you did here for 2 stroke oil removal? If so, how long to let dry before testing again? If not, any suggestions?

@manuellopez504 2 жыл бұрын

Thank you for your videos I have a question: Can I use fast setting concrete for stamp concrete?

@gulufolsom 2 жыл бұрын

Great video Mike, Can you please tell what base color and release color was used on the concrete?

@brucebui9561 2 жыл бұрын

Hi Mike, Im hoping you still look at these comments being that this is an old video I have a question will pressure washing release after a few weeks or even a month take off the release? I had mine done about 3 weeks ago but not enough release was removed. I was wondering if I can go over it with a pressure washer to take off more of the release. Also I thought we should always wait for the concrete to fully cure before sealing. Am I wrong? Seems a little too soon to seal after a few days.

@nickolas9238 4 жыл бұрын

How long do I have to wait before initial wash/blow? They used an antique release powder yesterday.

@MKIIIJETTA 2 жыл бұрын

Hello, I was wondering what kind of concrete sealer you like to use that gives you a wet look/non slip finish?

@gautamdesai297 2 жыл бұрын

Thank you for video. It's very helpful. How to control algae on stamped concreate and block wall?

@seanholder8151 2 сағат бұрын

Thanks for the tips! How much pressure you pumping the sprayer and what size nozzle is best? Thanks again!

@keithdantonio680 4 жыл бұрын

Well I wanted to add a photo and show you but after power washing it all the shine went away and it looks like I took the shiny color and the seal right off Now what do I do? Thanks man for your videos

@GoproPickleball 3 жыл бұрын

Mike I am catching up on most your videos, how much do you charge on this stamp job? I know how much you charge on a 4 inch slab pour but I am thinking of buying stamps and I want to know your price so I can try it. Thanks

@jctorres4178 3 жыл бұрын

Mike will any splash of Xyline from stamped concrete affect freshly painted iron railing.

@nickolrlando7713 3 жыл бұрын

Mike I used release on concrete with no integral coloring and used a textured roller with the concrete itself hold decent color from the release

@MikeDayConcrete 3 жыл бұрын

It'll retain some of the release color yes. You can also use a product called Tique Wash if you feel you need more color.

@me_023 3 жыл бұрын

I have a house with a stamped patio that looks colored pinkish,it looks like it needs a good cleaning and new sealant. If I do as you have done will it take some of the color away? Or do I need to do anything different? I called to have it done but they wanted $900 and I don't have that kinda money. Any additional advice /tips would be great

@allaboutcleaning 2 жыл бұрын

What would you recommend to clean sealed and unsealed stamped concrete? We use 1% bleach soap mixture on cement with a surface cleaner. Can I use the same process or should I brush dish soap and a brush for maintenance?

@raider5787 3 жыл бұрын

Hey Mike what color concrete and release did you guys use thanks for your time and for uploading these videos

@MikeDayConcrete 3 жыл бұрын

Gull grey for color and charcoal release.

@ecpieasternconcretepolishi4858 3 жыл бұрын

Can you do a video on how to pour concrete for polishing? Eastern concrete polishing..

@SeanPD1193 3 жыл бұрын

Mike do you use the .5 GPM fan tip that comes with the sprayer? Your videos are very informative for DIYers

@MikeDayConcrete 3 жыл бұрын

Yes, I use the one that comes with it.

@nickrhorer6397 Жыл бұрын

I'm doing a stamp with color. I don't have a pressure washer I was just gonna use a hose and a push broom. And your soap method. Question is I will be fine using a hose from the house correct

@theequipmentconnection5510 3 жыл бұрын

We just had a concrete patio poured. The concrete was colored, stamped and a powdered release agent was used but the contractor did not power-wash and/or scrub the release agent before applying a sealant. The release agent was swept off with a broom and then the sealant sprayed on (very spotty). Now I have light "powder" marks along the concrete cuts (under the sealant) and bare spots where there is no sealant. Can I remove the sealant, power-wash and scrub the release agent off or is it too late to correct the situation? Any suggestions would be greatly appreciated. Thanks

@kevinfox189 3 жыл бұрын

My wife's grandmother has a stamped concrete porch that is 3 years old. A family member used Thompson's Water Sealer on the stamped concrete to reseal it. Unfortunately, it didn't absorb. What is the best method/product to use to "strip" off the Thompson's Water Sealer without damaging the stamped concrete? Thank you!

@rcolebouck6486 3 жыл бұрын

Thank you for this video. Looks pretty straightforward. My stamped concrete was poured 5 years ago. I have power washed it but haven't sealed it since. Shame on me... Needs it badly. Besides being very dull, over time dampness leaves a green algae-like residue, and dirt. Power washing will take that off. Don't know if they originally used water-based or solvent-based sealer... just guessing it was water-based. It's all very dull now. I see you recommend Armor Ar350, an acrylic. Please don't be offended by the question, but is acrylic-based that much better over time than water-based? I'm so confused about which kind to use.

@VgniK88 2 жыл бұрын

Water based is cheap for that reason as it washes out over time.

@yvonneblankenship2633 4 жыл бұрын

Had a slab poured, stamped and sealed by a contractor (Texas) and I was expecting exactly the look on your video. However, it has BLACK spots all over it and the sealer has completely absorbed. Does that mean they didn’t power wash the release off properly??

@chibuezenwajuaku5286 2 жыл бұрын

How do you stamp concrete on a large space ? Do you partition and pour out concrete or do all the space at once? Pls advice

@ayieeazri 3 жыл бұрын

how long does it take before the cement is hard and wants to be washed..is it necessary to wait for the cement to be really dry and hard, before being washed?

@alexsami1569 3 жыл бұрын

Do you clean the powder from the concrete stamp same day

@my1948hummer 9 ай бұрын

Hi Mike, I have a stamped concrete patio and a chapin max sprayer. The 2 nozzles they provide are 110-1.0 gpm and the other is a 95-.5 gmp. I have followed your KZfaq videos and am wondering why I cant get the nice even spray like you do. I get banding, according to chapin and they say the sealer is too thick. I am using foundation armor 5oo. If you would, can you tell me what size tip i need for this sprayer and sealer combination so I can get the same spray results as you do without the "banding" I would greatly appreciate it for my next sealing. Thanks in advance!

@82dupont 2 жыл бұрын

Do you apply Shark Grip to prevent surface from being slippery?

@kenmumford2817 9 күн бұрын

I have black stamped concrete from 2 years ago I have dirt build up in the lines When using water it settles on top of the stone form after cleaning Do I blow that excess water off, so it doesn’t leave water spots?

@mattbingham2856 3 жыл бұрын

Great video! Can you use an electric pressure washer with less PSI on stamped concrete so it won't crack? My 3400 PSI pressure washer seems like it's too heavy for a job like this. Thoughts??

@MikeDayConcrete 3 жыл бұрын

Yes you can. It really depends how close you hold the tip and how early you wash it off.

@robertlopez9912 Жыл бұрын

Any advise I’m wanting to do a 13ft by 33ft about 4 in deep slab of stamped concrete then putting two 12ft by 14ft yardistry gazebos. Do you have an estimate cost here in Phoenix AZ region.

@35johnabel Жыл бұрын

Great video, should I wait till it’s not going to be below freezing seal coat? It’s not bad right now, but we might have more freezing days.

@MikeDayConcrete Жыл бұрын

I'd wait, yes. It's better when it's warmer.

@albertocruz4459 2 жыл бұрын

Hello Mike, thanks for sharing your knowledge and experiences in concrete, I have a question what type of soap or detergent do you use to wash stamped concrete?

@yussef18 2 жыл бұрын

Look at minute 2:55

@albertocruz4459 2 жыл бұрын

@@yussef18 thanks

@christinalove1309 2 жыл бұрын

My stamp was laid today and it rained like 4 hours later. I run outside and the concret looks like it had small conreter laying on it. I was nervous. I am assuming it was from the drops of rain. then I go and touch it and what I thought was hard concrete just dissolved in my hand. SO I am wondering when i wet it tomorrow will it look like it did at first. The guy is coming to seal it in a few days.

@tractorworkandmore411 4 жыл бұрын

I used an autumn brown powder hardener, then used a sandstone release agent. The release agent was mostly white powder. What do you recommend to remove all the release agent? Also, what do you recommend to highlight the concrete once the release agent is gone? Thanks for your input

@MikeDayConcrete 4 жыл бұрын

You're probably not going to be able to remove all of it. Just wash it like we do and lightly scrub it. That'll remove most of it. If it doesn't and you want to remove more, you can try a 9 parts water to 1 part muriatic acid wash. scrub it, neutralize it with baking soda and water mixture, then rinse it. That should remove a little more. Then use Tique wash from NewLook International.

@jameshermann9812 3 жыл бұрын

Is the AR350 product good for desert location like Tucson , AZ?

@danielcline7939 Жыл бұрын

Should the house siding and rock be masked off from the sealer?

@richardpowers4200 2 ай бұрын

Hi Mike great video! What are your thoughts on cleaning the stamped concrete throughout its lifetime? I found downstream bleach works, but not sure how that works long term.

@MikeDayConcrete 2 ай бұрын

Simple Green and lightly pressure wash, don't use bleach, it'll end up damaging the finish and discolor the concrete.

@Broke_operator 3 жыл бұрын

Mike, my guy stamped and then sprayed after the stamping. I asked if he was going to power wash and he said no. We have some white stuff on top that hasn’t gone away. The spray is for the accent color. It hasn’t been sealed.

@bluegrassdroneguy3495 Ай бұрын

Does the AR 350 need to be thinned to use thru the sprayer? Thanks

@killerbean3122 3 жыл бұрын

Where do u buy this sprayer and how much? Thx

@jeannemaclean9826 2 жыл бұрын

How do you add color back to stamped concrete once it’s faded? Thanks

@robssr1 3 жыл бұрын

Dawn or simple green is what I use.. Gotta love leaf blowers! I use them also. Speeds up cleanup and drying.

@jk5099 Жыл бұрын

Do you need to etch before sealing?

@johnbenjamin9559 Жыл бұрын

Good morning from Nigeria Mike, Please what's the name of the pressure washer used here?

@pradipbulsara9263 3 жыл бұрын

My stamped concrete was done last year. The contractor did sealing after 3 days. He sealed with two coats without let it dry enough. This year I saw lot of white residues. I took it out with xylene. Now what should be my next step to make it look shiny and glorious. Thanks 🙂

@MikeDayConcrete 3 жыл бұрын

If the Xylene worked like you said, then another very light coat of sealer like this one : amzn.to/3hZGoYQ You can roll it on or spray it on, just keep it very thin.

@ELMOJITOMAN Жыл бұрын

my concrete contractor didnt use the soap rinse and is coming back to seal in two weeks. any suggestions? thanks!

@tylergray9904 3 жыл бұрын

Hi Mike! I'm looking for advice on how to remove red stain/paint from stamped concrete patio. It's 26 years old and looks bad so I want to do a different color entirely and achieve the the same look you have on this curved walkway in this video. Any help would be greatly appreciated. Thanks!

@MikeDayConcrete 3 жыл бұрын

The best way is to have someone soda blast it (like sand blasting) They can lightly go over it and take off all the old stain/paint. Then you can use Tiquewash to re-color it and then new sealer.

@tylergray9904 3 жыл бұрын

@@MikeDayConcrete thank you!

@sydneypenisini248 4 жыл бұрын

Can you make a video on adding color to concrete manually?

@MikeDayConcrete 4 жыл бұрын

I only add color by putting the bag of color in the concrete truck when they load the truck. I used to throw color on the surface and work it in with the bull-float or mag float but not anymore. It's way to messy that way.

@exteriorcleaning2923 3 жыл бұрын

Question about new everyday concrete. Would clean it the same way and get good results?

@MikeDayConcrete 3 жыл бұрын

I use a surface cleaner with a pressure washer but yes get excellent results.

@exteriorcleaning2923 3 жыл бұрын

Mike Day Everything About Concrete Thanks

@beantbapla8452 3 жыл бұрын

hi i want to seal my driveway (stamped) same as in this video , 3 years old, have little cracks also. what should i do before doing sealing spray. can you please guide me. thanks

@VgniK88 2 жыл бұрын

Good wash let it dry overnight then seal it

@alexsami1569 3 жыл бұрын

How many inches should be the concrete stamp sir ?

@nickjohnsonj9291 2 жыл бұрын

Isn’t a polymer sealer better then a acrylic sealer? I ask this because I have a sealer job to do

@Duffry2000 11 ай бұрын

Mike can I go over my matte finish sealer and now use shiny with out stripping ?

@MikeDayConcrete 11 ай бұрын

Yes, but use a gloss sealer with the same carrier (solvent or water) as the original sealer.

@Duffry2000 11 ай бұрын

@@MikeDayConcrete Awesome I really appreciate the information and reply. Thank you. Joe

@musix5 4 жыл бұрын

My concrete was stamped and colored by the throwing method that you no longer use. If I power wash and scrub the way you suggested won't I remove the color from the concrete? As a result of the throwing method isn't the color just in the very top layer? My grey stamped concrete (just like in your video) is 3 years old...after hard rains you can see areas of color fading away. I would like to power wash it and seal it but am afraid I'll remove all of the color off. Am I missing something?

@MikeDayConcrete 4 жыл бұрын

You may remove some "loose surface color" but the color should be hardened in to the cement paste on the surface of the concrete. You could "stain" the surface to re-do the color if you need to, then seal it. Check Ameripolish.com for stain colors.

@jamesn.4892 4 жыл бұрын

Can I use a 2400 psi pressure washer to prep my 3 year old stamped concrete patio? Maybe just a smaller fan and longer time spent to do so?

@MikeDayConcrete 4 жыл бұрын

Yea, it might just take you a little longer.

@lazylizard6532 4 жыл бұрын

James N. Look for something like a “SIMPSON Turbo Nozzle” to make it go faster. It’s a narrow stream that rotates, covers an area like a fifteen degree fan but it penetrates like a zero degree. I have one and it has worked very well for me.

@jamesn.4892 4 жыл бұрын

Lazy Lizard I bought on and really made no difference. Turned a flat swipe into a circular swipe. Returned it.

@lynnferro-mills1135 2 жыл бұрын

What color of release was used on this project

@EPerez-iw9zp 2 жыл бұрын

Quick question, was this concrete side was a certain color or was it just stamped without a color

@alceja3522 2 жыл бұрын

Good question, mine was just stamped without color, I’d like to seal it in a few weeks.

@smokinjoe0878 2 жыл бұрын

I have stamp concrete and it’s due for a re-seal. Would you do one or 2 coats?

@MikeDayConcrete 2 жыл бұрын

Probably do 2 really light coats.

@jonathanbanuelos7355 2 жыл бұрын

After applying the sealer how long do I wait to park my car?

@briancarpenter3548 3 жыл бұрын

what do you think recommend for painting a porch it is concrete

@VgniK88 2 жыл бұрын

Colour sealer

@oliversimoni4400 Жыл бұрын

What if you use bubble gum liquid . Do I still have to power wash it?

@keithdantonio680 4 жыл бұрын

I think I messed up my swimming pool and stamped concrete and I was going to power wash it and make it look nice i used a cheap electric power washer not my high pressure heavy duty one and I used the 40° temp and I was gentle on it and look at my results

@christianbedoya1218 2 жыл бұрын

Why our stamp concrete has a lot of bubbles the day after the sealer?

@josephjohnson2114 Жыл бұрын

Can you use a surface cleaner?

@shiftstart Жыл бұрын

Wouldn’t pressure wash also damage the stamps while removing the powder?

@Flyhightreklow 10 ай бұрын

Nope

@nkaur138 2 жыл бұрын

How to remove totally because my front driveway is slippery when rain it so dangers I try down soap to work

@MKrebs-kl7ud 7 ай бұрын

For a DIY’er a plastic sprayer is fine, just throwing it away afterwards-$8 versus 250 for a stainless steel sprayer and you have to clean it. Again for a DIY’er. Also, I rolled my stamped concrete for a more even coat- contractor sprayed it and it was very uneven in less than a year so I redid it.