You are welcome! Thanks for watching Deco-Crete TV!!

Rejuvenator will help clear out the white spots and might bring back the faded areas. It all depends on the reason for the fading. Follow the steps in this video and if the faded spots are still there, you may need to add a small amount of sealer to those areas. Small test spots are always a good idea before treating the entire slab. Thanks for watching Deco-Crete TV!!

Good morning!! Have a great weekend Charles👊

Thanks for the comment! The cleaning/prep for the re-seal is generally just a pressure wash. We would recommend our D-One sealer as long as there's no heavy build up from original sealer. If it's been 7 years, the ordinal is probably almost gone at this point. Fixing the damage from the pool cover will be a bit more tedious. The best way we've found to do this is to use a color hardener slurry, but you could also use a concrete patch material or a concrete overlay. The hardest part is getting the color to match. I'll leave a few links to some other videos about cleaning, sealing and repairs. Thanks for watching Deco-Crete TV!!! kzfaq.info/get/bejne/qJ13fLin3dOUpoU.html kzfaq.info/get/bejne/q9FiqrN6vs_SdqM.html kzfaq.info/get/bejne/b8mhfZeT1dGyhH0.html kzfaq.info/get/bejne/q5uCgbOjzJOcp3k.html

@@DecoCreteTV Thank You sooooo much for the detailled and timely response!!!

Thanks for the tip!!!

Thanks for the comment! If it's a two-part epoxy system, Rejuvenator will not be the answer. Rejuvenator is designed for solvent-based acrylic sealers only. Most two-part coating products are made from a different type of resin than acrylic sealers. You could try a small test spot to see how it reacts and make a decision based on the results of the test spot. I'll leave a link to another video on the differences between two-part coatings and acrylic sealers. Thanks for watching Deco-Crete TV!!!! kzfaq.info/get/bejne/mrmqapSqmduvk4k.html

Deco-Grip will mix into Rejuvenator, but it's hard get even application and a lot of it just ends up sitting on top the sealer. The better thing to do is use the Rejuvenator to open the existing sealer up, then a second person can broadcast the grip. A broadcast gun works the best, I'll leave a link to the one we sell on our website as well as a link to a how-to video. Thanks for watching!!!! www.deco-cretesupply.com/products/sealer-additives-sprayers/deco-grip-sprayer kzfaq.info/get/bejne/kNakZsp3ldW2mIU.html

@@DecoCreteTV thank you 😊

Thanks for the comment!! If the sealer on your slab is solvent based, Rejuvenator would be a great thing to try before removing the sealer. It may not always fix the problem permanently, but there is no downside to it and it will help things out. If the problem is still there after two or three applications of Rejuvenator, then you would need to remove the sealer and start over. Thanks for watching Deco-Crete TV!!!