How to Clean ANY Carburetor Explained!

Рет қаралды 45,238

6 жыл бұрын

In this video I take apart a carburetor from a ttr225 and show you guys how to clean ANY carburetor without any special tools! Don't forget to like, comment, and subscribe for more content!

Пікірлер: 50

@will_the_wheel_guy 3 жыл бұрын

Thanks for the video! First time working on a bike in my life and i feel great! Everything went super smoothly because of this so thank you very much!

@jaredbauer3058 3 жыл бұрын

I would recommend to anyone needing to clean a carb fully like this one - an ultrasonic cleaner rather than a wire brush.

@damecioyonh5554 5 жыл бұрын

🤩 I have no profecional tool, so, loved the trick, with tiny wire 😀, every second of this video is helpful. Congratulations you better day after day with the video edition. Thanks.

@atdi72 3 жыл бұрын

Thanks mate, just about to do this on a 1987 TT225. Big help. :)

@kevinbock6096 6 жыл бұрын

You don't use a steel brush on carb parts. Brass, better yet soak in carb cleaner..

@maddenboss3452 5 жыл бұрын

Kevin Bock after studying mechanical engineering at ICUP TECH Institute, I suggest adding music, as it may distract you while you attempt to drive off a cliff

@AboutaMileAdventures 5 жыл бұрын

hes right though

@benjaminrideout9893 3 жыл бұрын

It’s a regular tooth brush u idiots

@jaredbauer3058 3 жыл бұрын

@@benjaminrideout9893 sorry guy - its a wire brush

@benjik007 6 жыл бұрын

Thank you so much man!!!

@megancorletti2133 6 жыл бұрын

super clean....super clean....super clean....super clean.....

@maddenboss3452 5 жыл бұрын

Megan Corletti actually the experts from ICUP Tech believe this is actually super dirty.... Super dirty.... Super dirty

@marsarmory6236 3 жыл бұрын

Where does the long black hose that sits above the fuel line inlet on the front of the carb go? I have this same project bike and that hose was already disconnected.

@nevets5150 Жыл бұрын

Hey thx for the video! Question - Is the carb on this bike (ttr225) the same as a TTR230?

@Yuuiiytrfbh 6 жыл бұрын

Thanks, I need to do this to my ttr225 but I'm scarrrred.

@patrickwilliams9611 2 жыл бұрын

scared lol don't be a pussie carbs are easy

@RobbiRocks 2 жыл бұрын

Great information and Top bike, just the back ground music is shocking and tad loud

@ofthehappyplace 3 жыл бұрын

That was much easier than I thought it would be. And I agree the music was annoying

@odysseas01 3 жыл бұрын

With a carb so dirty you should take out the emulsion tube, which is retained in place by the main jet. Believe me the emulsion tube will be just as dirty as the float bowl and all it's holes will be clogged. To take it out you have to first take off the top plastic cover of the carb, with the vacuum membrane and slider with needle. Then you just push the emulsion tube out from the bottom.

@crazymansoff-roadtoys1211 4 жыл бұрын

Is there a number of turns out on that pilot jet? I just bought one of these.

@Bengineer-K 4 жыл бұрын

Crazy Man’s Off-Road Toys great question! Both the main and pilot jet are screwed at the way until seated snug. You will be able to adjust the air/fuel ratio externally

@crazymansoff-roadtoys1211 4 жыл бұрын

Southhills Mx Thank you very much

@ianwalters1794 4 жыл бұрын

Thanks

@blackfox5219 2 жыл бұрын

hey i bought a 2001 ttr225 would carb and choke cleaner work just as well?

@Bengineer-K 2 жыл бұрын

Most likely! You may still have to scrub components with a brush to remove tougher grime but yes that will work!

@blackfox5219 2 жыл бұрын

@@Bengineer-K ok thank you! wish me luck on cleaning it also are there parts on the bike that i would break if i got the whole bike wet to wash with a rag some soap and a hose?

@digestingflea4714 3 ай бұрын

If you have to scrub it I’d recommend using a plastic brush instead ❤

@redetroitwing 4 жыл бұрын

Where do you adjust air/fuel

@tylerross2968 4 жыл бұрын

It’s gonna be the jet you have in it they should sell kits with a couples jets also if you were to add a new pipe or something like that you’ll also have to mess with it if you do that

@jackalfaro8636 4 жыл бұрын

cool

@nobrizzle 4 жыл бұрын

I wouldn't recommend jamming a screwdriver into the carb like that. You can scrape metal which can come off into the carb or even worse.

@ireneswift4509 5 жыл бұрын

please! No more music!

@beaujacksonn 4 жыл бұрын

ikr!!

@damianfro4855 4 жыл бұрын

I took it out, and now my cboke doesnt work

@redetroitwing 4 жыл бұрын

How common is it for a new carb to have the floats stuck? I swapped a new carb on my 225 and it's pouring fuel out the drain line, even tapped on it and cycled turning on the gas to no avail

@Bengineer-K 4 жыл бұрын

dusty fleissner I’ve seen it before, especially with cheaper carbs, also any carb get knocked around during shipping so that may also be a factor. I would take your bowl off and check that they’re are no missing parts ie your float needle, and if everything is good then use a light oil such as wd40 to oil the pin and make sure everything moves freely. Lastly this is very uncommon but possible, the float was manufactured with a pinhole in it and thus the float will not function as it should, hope this sets you down the right path!

@dmitriy6275 4 жыл бұрын

I have the same problem on my ttr 225

@Keyumiz 5 жыл бұрын

When you remove the float do you have to set it again?

@Bengineer-K 5 жыл бұрын

Jordan Holland Nope! Most carbs you'll run into don't need the floats set.

@paniccg 4 жыл бұрын

Recommend and edit mentioning the washer under the main jet when disassembling as I didn’t realize it was there, lost it and now am dead in the water

@christopherwalsh7700 3 жыл бұрын

Why on earth would there be varnish on any of the components???

@beaujacksonn 4 жыл бұрын

couldn't concentrate due to music

@barrycasey7389 Жыл бұрын

Great video and voice over! Music (if you can call it that) was annoying, distracting, and drained my life force. Keep up the good work and consider less distracting music.

@hakimwaempire3057 3 жыл бұрын

Best and easy way to clean is just disassemble the parts drop them in gasoline[petro] leave for 1min then using a soft cloth clean the parts and assemble them back. Then thank me later