How To Rebuild A Motorcycle Carburetor

No video

How To Rebuild A Motorcycle Carburetor

Рет қаралды 47,110

8 жыл бұрын

Rebuilding a Carburetor on a Yamaha TTR 125 Dirt Bike. www.CharlieKingCoaching.com. This video teaches you how to rebuild a carburetor on a Yamaha TTR 125 Dirt Bike Motorcycle.
A DIY guy but I've never worked on a motor cycle. We bought a TTR 125 for my son and it started dumping fuel and wasn't idling correctly. After trying to clean the carburetor or carb without any change to the performance, I decided that it's time to rebuild the carburetor. If your bike is backfires or is backfiring, dumping fuel, or puking fuel, not idling, won't start, will not start, is constantly flooded or is flooding, consider rebuilding the carburetor. It will improved fuel economy (improve gas mileage), run better, higher performance, go faster, won't stall anymore, and be more enjoyable to ride!
This is a job any DIY'r can do, so go out and try it!
Don't forget to come find me on Facebook: / charliekingcoaching
KZfaq: / @charliekingcoaching
Twitter: / coach_charliek

Пікірлер: 70

@TheRobertralph 6 ай бұрын

Thanks a lot for making this. I appreciate the time you took as the video helped me a lot.

@kyleterpstra9432 4 жыл бұрын

I never rebuilt a carburetor before but your video was awesome and helped me learn how to do this for our TTR125 Yamaha dirt bike. Thank you!

@CharlieKingCoaching 4 жыл бұрын

Your welcome!

@nirojordan3420 8 жыл бұрын

Best video on KZfaq by far!!

@CharlieKingCoaching 8 жыл бұрын

J Webster, thanks!

@brightonwestvideo 8 жыл бұрын

Great how to video! I've never tried to rebuild a carburetor - and I don't own anything with a carburetor anymore! I like the photo idea, and I'm thinking: take a video when taking it apart, then play it backwards to remember how to put it back together!

@CharlieKingCoaching 7 жыл бұрын

Thanks as always Brighton!

@dunchadoit5421 3 жыл бұрын

Hey Charlie, this is an awesome video. We're about the same age and skill level. Your video helped me a lot. Thank you and keep making great videos.

@ethankorcek5509 7 жыл бұрын

thankyou so much for creating this diy, I have been looking for a video about carb rebuild vid about my ttr125 2003, similar, helped me find where jets go

@CharlieKingCoaching 4 жыл бұрын

Thx Ethan!

@stevebasanyi4374 2 жыл бұрын

Great job! I thought I was the only one left that said "schumtz!"

@joearreola5293 2 ай бұрын

Just a tip..get a weld tip cleaner and use the smallest feeler to poke and clear out the smaller orifices.

@enriqueprice9497 6 жыл бұрын

Great video I'm rebuilding mine today

@CharlieKingCoaching 6 жыл бұрын

Thanks Enrique!

@123redeemer 7 жыл бұрын

Great video man keep up the work!

@CharlieKingCoaching 7 жыл бұрын

Thanks Areeb!

@moneyracer1 2 жыл бұрын

Great video

@lreyn2130 3 жыл бұрын

This looks similar to a Honda XT125 I rebuilt. I have a TW200 now, (rebuilding soon!) which I'm noticing is very similar to your TTR. I recall that there is a screw that has to be turned a certain number of times according to the manual. Where is that screw on your carb? Great video, thanks for the steady camera work!

@jeromehayes1998 2 жыл бұрын

Hey honoring some one can answer my question on the pressure tube that is like a t the tube that goes to the right dose it connect to anything

@kevthecompass6217 8 жыл бұрын

The tube you mentioned that is just pressure sensitive is it supposed to be connected to anything else on both sides ?

@CharlieKingCoaching 8 жыл бұрын

+Kevin Perez Are you referring to the black hose on the top? I did not track it in either direction. I *think* (and may be wrong) that it it's a pressure overflow hose.

@manuelsalgado8510 6 ай бұрын

Is this similar to the ttr230?

@infinite_rc8871 7 жыл бұрын

What was the hose you pointed at 1:24 and what is its purpose. My ttr doesn't have one and I think it could be causing the problem I have

@CharlieKingCoaching 4 жыл бұрын

Sorry I didn't reply to this in a timely manner. I hope you found an answer to your question!

@manuelsalgado8510 6 ай бұрын

How much is a new carburetor?

@mich5ael907 7 жыл бұрын

Thanks!

@CharlieKingCoaching 7 жыл бұрын

You're welcome Mich5ael!

@adamzorn6556 3 жыл бұрын

well you taught me how to take it apart then decide to end the video..... really helped.... meanwhile my carb is in a million pieces with ni direction of how to put it back together

@dunchadoit5421 3 жыл бұрын

Hey Adam, he does say to take pics of everything so you can put it back together. If you need help hit me up. I can hopefully assist you in getting it back together.

@drjedipimp Жыл бұрын

@@dunchadoit5421how does one replace the needle valve in the carb? I’ve oiled it but the o-ring doesn’t fit in there

@silkboxing4454 6 жыл бұрын

Great Video Bud. I restored 2 TTR’s a 90 and a 125. I clean the carbs out at least twice a year. I will let the jets sit in carb cleaner for about 10 minutes after spraying them then I take a guitar string and put it through the jets then use an air compressor. The tiniest piece of debris will clog the jets and sometimes a pain in the ass to get the smallest piece out. They are both 2007 stock and never had to put new jets in. Just replace the gasket. Also have to Honda CRF 50/ 70 and 110 and those Honda’s will start up forever with very low maintenance.

@CharlieKingCoaching 4 жыл бұрын

Such great feedback Philly! It really is just the SMALLEST fleck can mess with your carbs. Air compressor would probably made a big difference. Thx!

@levischulze8062 5 жыл бұрын

At 10:39 there should also be a washer and o ring in there. It can help if you look at a part diagram online. Also I like to take my carborators to get cleaned In an ultrasonic cleaner.

@CharlieKingCoaching 4 жыл бұрын

Levi, solid feedback, thanks! I'm unfamiliar with an "ultrasonic cleaner", maybe my results would have been better if I had ;-)

@codygunderson9455 4 ай бұрын

I rebuilt mine and it wont start and leaks gas how do i fix it

@ethankorcek5509 7 жыл бұрын

on 15:14, the picture of the smallest jets, witch hole does the bigger holed jet hold

@juniorco3109 6 жыл бұрын

That's what I was wondering... were you able to find out?

@CharlieKingCoaching 4 жыл бұрын

Great question. Unfortunately, my memory of this from a couple of years ago is incomplete. Best of luck finding out!

@moises8836 6 жыл бұрын

Hi i have same bike but my chok wire it won't comoff n i clean my carb but now my bike dont stay on or running.

@CharlieKingCoaching 6 жыл бұрын

This bike was finicky for sure.

@rafaelrodriguez1623 8 жыл бұрын

I have a question. I rebuilt my carb. the issue I'm having is I can figure out what spot I should set my idle and my air fuel mix screw.

@CharlieKingCoaching 7 жыл бұрын

Rafael, great question. The only way I know if to run the bike sand adjust it while it's idling. Listen to the idle speed so it neither sounds like the engine is lugging or running too hard. Hope this helps!

@smokedowngethigh 5 жыл бұрын

For future reference, before removing the idle mix screw, bottom it out and take note of how many turns it took to bottom out. Then remove it. When you go back to reassembling it, bottom it out and then back it off however many turns it took you to bottom it out before.

@ariannabapst3306 3 жыл бұрын

It's a ttr standard I have the same one

@colinnalezny3272 6 жыл бұрын

where can i find a good cheap rebild carb kit for an 125 ttr 05

@CharlieKingCoaching 4 жыл бұрын

Great question, @colin! I hope another viewer can support you!

@mmarmino 6 жыл бұрын

where exactly does the other black hose go to? our doesn't have that hose.

@CharlieKingCoaching 6 жыл бұрын

Argh, that sounds frustrating. Sorry friend, maybe another viewer can help you out. I'm afraid I wouldn't even make a GOOD guess at this ;-)

@rigguyjt 4 жыл бұрын

I'm noticing there wasn't a needle in the seat for the float. Had you already removed it before hand?

@CharlieKingCoaching 4 жыл бұрын

Great question, unfortunately this was several years ago, and I cannot remember. Sorry I couldn't be of more help!

@rigguyjt 4 жыл бұрын

@@CharlieKingCoaching those ttr carbs are the most stubborn I've ever worked on. If the floats aren't set perfect they won't run right no matter what you do. Poor design.

@blackbird1234100 7 жыл бұрын

what you called the throttle body is actually the throttle slide. a throttle body is something used mainly in cars, similar to a carb, but slightly different. it was used after carbs but before electronic fuel injection after that at 9:10 that's the main jet not main throttle body yes it is normal that the float pin comes out easy. it's normally held in by the edges of the bowl 19:00 once more, throttle slide

@CharlieKingCoaching 7 жыл бұрын

Random_rapper20, thanks for that! I'm afraid I'm the DIY guy with limited knowledge/tools doing the best I can ;-) Always grateful for the input. I appreciate it.

@Jskicalifornia 7 жыл бұрын

Get a JIS Phillips.

@andrewgreene1054 7 жыл бұрын

Learning something new everyday... lol

@kirriksanders1222 5 жыл бұрын

Love the video.. ok need more video

@volticpanzer8408 8 жыл бұрын

i think the people working on my working on my Carburetor put in backwards. Im now trying to figure out how to take it out and flip it around.

@CharlieKingCoaching 8 жыл бұрын

Bummer! So sorry to hear this, VoLTiC! I "SHOULD" be pretty straightforward and not easily confused. I'd suggest taking ti back to them to make it right. If you paid for the fix, They should make it right for you.

@volticpanzer8408 8 жыл бұрын

Charlie King no just a friend i know who usually works on trucks not dirt bikes im sure me and him can go over it together and try to fix it.

@CharlieKingCoaching 8 жыл бұрын

Cool, congrats on making it workable for you both! I'm sure he wanted to do right for you, and would welcome the feedback.

@blackbird1234100 7 жыл бұрын

just saying, carb cleaner destroys gloves. it's also extremely flammable

@CharlieKingCoaching 7 жыл бұрын

Scary stuff, I *think* it's a carcinogen as well (linked to increased risk of cancer). Happy to wear thick gloves using that stuff ;-)

@pat9861 5 жыл бұрын

It also destroys rubber in the carb e.g. the gaskets and that sort of stuff. Just clean it in the fuel it runs on. A eye dropper works well to push fuel through it to clean it