How to Coat over Concrete Floors with Metallic Marble Epoxy

How to Coat over Concrete Floors with Metallic Marble Epoxy | Full DIY Tutorial

Рет қаралды 131,518

Күн бұрын

Epoxy Flooring for your Concrete and Wood Floors:
www.stonecoatcountertops.com/...
Metallic Epoxy Floor Step by Step Written Instructions:
www.stonecoatcountertops.com/...
Stone Coat Countertop Epoxy:
www.stonecoatcountertops.com/...
Products used ⬇️
Epoxy Metallic Flooring System
Floor Patch Epoxy Gel:
www.stonecoatcountertops.com/....
Our Floor Patch Epoxy Gel is perfect for filling any gaps or cracks in the concrete for a seamless designer floor. The gel dries quickly and can be sanded and smoothed before painting.
Moisture Seal Epoxy Primer:
www.stonecoatcountertops.com/...
Our epoxy flooring system starts with a moisture seal epoxy primer, which bonds like tree roots and will not fail. This primer is applied over concrete to ensure that your epoxy is secure and will last for years to come.
Flooring Epoxy Midcoat:
www.stonecoatcountertops.com/...
With five epoxy flake color options from Stone Coat Countertop Epoxy, you can easily turn your forgotten garage into a functional finished space to enjoy. Our epoxy flake options come in a variety of colors and sizes, so you can create the perfect look for your space
Polyaspartic Flooring Topcoat:
www.stonecoatcountertops.com/...
This topcoat is strong and won't be affected by the sun. It can be used with our epoxy flake floor system or our epoxy metallic marble system. We also give you an additive to make your floor less slippery. With Stone Coat Countertop Epoxy, you can turn your garage into a nice place without hiring expensive people or needing special tools.
Non-Skid Additive:
www.stonecoatcountertops.com/...
This unique floor coating system combines either an epoxy metallic marble or a multi-colored garage floor epoxy flake system with a non-skid additive that creates a durable, anti-slip surface with our Polyaspartic flooring topcoat
Flooring Tools (bottom of the page)
www.stonecoatcountertops.com/...
Spiked Shoes for Epoxy: amzn.to/3zRyn3G
Flooring squeegee: amzn.to/408WVzW
Epoxy Glide Roller 18’’: amzn.to/411kXxY
Roller Pan 18’’: amzn.to/43ongg4
Roller Extension Pole: amzn.to/43tNhe6
Roller Frame 18’’: amzn.to/3MAa0yQ
Floor Scraper: amzn.to/3mmJkam
Floor Surface Protector: amzn.to/400kFG8
Calcium Chloride Moisture Test: amzn.to/3KRqcdH
7in Angle Grinder: amzn.to/41fh0oQ
7in Diamond Grinder Wheel: amzn.to/3ZVgg7u
7in Dust Shroud for Grinder: amzn.to/41iVH5R
Shop Vac: amzn.to/3zOEVjg
Corded Leaf Blower: amzn.to/3ZZRF1k
How to Coat over Concrete Floors with Metallic Marble Epoxy:
Has your garage floor seen better days, is it full of unsightly cracks, stains, and pits? We’re teaching you step by step how to properly prepare your worn out garage space for Stone Coats Metallic Marble Epoxy Flooring System. We simplified and improved our flooring system for the do it yourselfer. Learn money saving tips and tricks for professional results even on your first floor! Learn right now how to save thousands on your epoxy floor project adding value to your home and giving your garage and other spaces a finished look, come along with me folks I’m showing you every step along the way, Stay tuned and enjoy the video.
Chapter Breakdown👇
0:00 - How to Coat over Concrete Floors with Metallic Marble Epoxy Inro
1:55 - How to prep concrete floors for epoxy and take out a toilet
2:41 - How to grind open cracks and apply our Floor Patch Epoxy Gel
5:40 - How to grind a floor to prep for epoxy moisture seal
6:22 - How to apply a moisture seal epoxy primer over concrete
9:46 - How to apply Stone Coat's Flooring Epoxy Midcoat (color coat epoxy)
15:04 - How to apply our Polyaspartic Top coat with non-skid grit to your epoxy flooring
20:34 - Final results of turning this concrete floor into metallic marble epoxy
About us:
Stone Coat Countertops is an epoxy based KZfaq channel that will show you unique ways to DIY your way to an amazing kitchen, bath, resin art, construction, or design project on a budget. We believe in teaching skills in, woodworking, art, epoxy floors, epoxy countertops, and showing how to get realistic results to make your old laminate, tile countertop, formica, concrete countertop, garage floor, and walls look like renewed works of resin art! Simply put we are always looking for our next project to help all the DIY folks, contractors, designers, artists, and hobbyist, tackle their next makeover. Watch our free how to videos on the skills to make your dreams come to life with epoxy resin! Contact us anytime for free project support, (541) 450-1976 You Got This!
#StoneCoatCountertops #epoxy #YouGotThis

Пікірлер: 144

@justsayin3600 Жыл бұрын

This popped up on my recommendations. The wife wants me to seal our 3 car garage. I'm about 1/3 done with the diamond grind. This was a good reminder how to do it right the first time. Thanks for putting this video together.

@StoneCoatCountertops Жыл бұрын

U GOT THIS! Have you purchased your flooring epoxy yet?

@mitchquist Жыл бұрын

Nice! Let me know if you have any questions 👍

@Grateful-Blessed 9 ай бұрын

Hey Mitch I just started working with epoxy but I never k ew you could do this,😮 I love it. Thank you

@kyleswaggard9375 11 ай бұрын

I got a VFW Post in Alvin Texas that desperately needs the floors redone. This is exactly what we're looking for.

@user-gp4uw2cm8f 2 ай бұрын

I Love the brown paper bag epoxy floor and the penny epoxy floor ❤❤❤

@deniseurban6704 2 ай бұрын

HI MTICH! Loved watching the video. We have tile floors throughout our house in Florida. You have just given me another idea on what to do when we remodel. While tile is practical for the area, trying to keep the grout lines clean is impossible. Luxury vinyl was the plan to replace the tile. Now I am thinking LV for the living, dining and bedrooms, but definitely like the idea of epoxy for kitchen, baths and laundry room. Thanks again!

@BrianMason3636 Жыл бұрын

Hey Mitch! Just wanted to say thank you to everyone at SCC you Rock!!

@StoneCoatCountertops Жыл бұрын

Appreciate you Brian! Thanks for subscribing and enjoy that new garage floor!!!

@NGCharlan Жыл бұрын

Great Job Mitch! Can't wait to see a white metallic floor!

@StoneCoatCountertops Жыл бұрын

Thanks so much! It's in my kids walk in closet! New flash! They got into the curing epoxy 👀 Thank God it was cured enough, I saw cured big foot prints the next day!

@ItzKarenBruh Жыл бұрын

Epic 😮 I want to Flooring epoxy my entire house!

@StoneCoatCountertops Жыл бұрын

LETS GO!!!!! I got u covered!

@ItzKarenBruh Жыл бұрын

@@StoneCoatCountertops Between kids and pets this would be much easier to clean - ask the 3 vacuums we have destroyed lol 😂

@fuzzybutkus8970 2 ай бұрын

That’s a straight up class act. Beautiful job guys. Even with all the bad mojo. Needs some humbling,Fast.

@renayemcdougall7112 Жыл бұрын

Love this marbleized floor, so beautiful!!

@TigersbloodFTW 8 ай бұрын

My dream latrine ❤ great job as always!

@deborahallen4169 3 ай бұрын

Gorgeous!!!!

@ArtistTillDeath Жыл бұрын

Ooohhh more floors! I love it

@StoneCoatCountertops Жыл бұрын

Our best fan! Always getting the 1st comment! THANKS ATD - Everyone SUBSCRIBE to Artist till Death, they teach amazing epoxy art and are fun and entertaining!

@AZjoe52 Жыл бұрын

Thanks Mitch, another great tutorial video 👍👍👍

@StoneCoatCountertops Жыл бұрын

Very welcome, lemme know if you need any help getting a project started!

@MrWepal 2 ай бұрын

Great work bro

@asyl_Royale 3 ай бұрын

Beautiful!

@chrisnlannie 7 ай бұрын

Thank you so much ❤

@amiedavis5257 Жыл бұрын

White marble with ivory, gold and silver streaks. It'll literally match any wedding.

@robertrayl2357 8 ай бұрын

Looks good

@bobjohnson8970 Жыл бұрын

Hey Mitch. Nice job, looks good. Friend of mine, career concrete finisher says there are 3 guarantees with concrete. 1) it will get get hard 2) it will crack 3) nobody will steal it Keep up the good work, Stonecoat rawks!

@StoneCoatCountertops Жыл бұрын

HAHAHA Nice one, I used something like that in a video once but not the it will get hard line! Thanks for stopping by, do you have a floor project in mind this DIY season?

@bobjohnson8970 Жыл бұрын

@@StoneCoatCountertops No projects. Between my real job and side work fixing fiberglass tubs have no time. Sure do like what I have seen of your system, and who knows, I might find an extra bit of time some day. Been subscribed for a number of years and watch every chance I can. Keep up the good work. You are just down the highway from me, might just stop by one day.

@user-zu8rj9xc7n Жыл бұрын

I like the envy heater

@jocelynmckinstry8449 Жыл бұрын

❤ Great job Mitch love it

@StoneCoatCountertops Жыл бұрын

Thanks so much! Thanks for subscribing and watching for so dang long!!!! Let me know if you have any questions

@timh9746 Жыл бұрын

The Billy Mays of Epoxy.

@CJWarlock Жыл бұрын

Beautiful and practical effect. Supercool. :D Congrats. :)

@StoneCoatCountertops Жыл бұрын

Thank you! 😊 Let me know if you have any questions!

@smokinone951 11 ай бұрын

Mitch, your projects look absolutely amazing! I want to try this on my back patio concrete. You make it look so easy

@gigireddick3239 Жыл бұрын

Mitch, This looks gorgeous I would love to do this in my home. Thanks for the thorough explanation. Beautiful work!!❤❤

@user-ui6zh6yp4e 2 ай бұрын

Expansion joints vs contraction joints : Expansion joints separates the slab into separate pieces and includes a filler material ; bituminous fiber, plastic, wood, etc. It’s purpose is to make space for these separate pieces to go when they expand. A contraction joint is tooled or saw cut into fresh or green concrete to control the “guaranteed” cracking caused by contraction.

@houstonsticker9340 9 ай бұрын

thank u

@melrose76 9 ай бұрын

Hey Mitch Thanks for awesome video. Basement recently flooded Taking out all the walls Is it best to do the whole floor area before constructing new walls?

@angeldelarosa2458 Жыл бұрын

If you pause the video in the minute 19:31 you can perfectly see a gorilla and chubaca from the star wars😱😱😂

@StoneCoatCountertops Жыл бұрын

The Gorilla is my reflection!!!! HAHAHAHAHA😂😂😂

@jgravinnijr Жыл бұрын

Beautiful hey Mitch

@StoneCoatCountertops Жыл бұрын

Thank you Jorge! Lemme know if you have any questions along the way

@revastewart574 16 күн бұрын

This is absolutely beautiful. I have a small shower like this. concrete floor in my game room area of my home that I would love to try and do this to my concrete shower floor. Can I use this same kit you’re using.

@karenmccoy2120 Жыл бұрын

WOW, I love this, so want to do this to our family room possibly a bedroom. How does this stuff hold up to occasional dog pee? I have two Chihuahua's and an occasional mistake from them

@robertmccreary4749 Жыл бұрын

Hey Mitch, can you torch out bubbles with like a propane torch from Harbor Freight?

@johncarrasco7441 Жыл бұрын

What is the lifetime of the floors and kitchen countertops, that is, how often do you have to redo the work?

@kathygross3731 7 ай бұрын

I’m buying a house and can’t wait to add epoxy floors! You guys are amazing. I’ve found pics but don’t know what colors are in the photo. Help!! Also can you tell me an estimate on an 1104 sq ft?

@milissaadams-henderson7701 Ай бұрын

Hey Mitch! How is the foot feel with that non-slip grit? Can you feel it underfoot?

@DJ_Mobot 11 ай бұрын

Im in the middle of an addition project. The concrete is not covered yet and I am considering removing our tile in the adjacent room to also epoxy. These two rooms will would get a lot of traffic. My questions is will i need to buff out scratches in the future from wear and tear? And if so, how difficult is that processes? Thanks Mitch.

@zacharybender1407 Жыл бұрын

Hey Mitch! Would this be appropriate for a shower floor? Thanks!!

@margaretquist9920 Жыл бұрын

Hey Mitch! Great training video!!! I had a friend ask if she can do this over wood sub flooring or old hardwoods.

@StoneCoatCountertops Жыл бұрын

Yes you sure can! Metallic Marble Flooring tutorial over wood subflooring coming out very soon! It's even easier than going over concrete - no grinding needed!

@allanpennington 5 ай бұрын

Is there a matte top coat finish available or only the high gloss?

@SharonBrown-nx4jv 8 ай бұрын

Hey Mitch, I recently acquired a house in Mississippi and I’m interested in doing the entire house with epoxy flooring. Will all floors need to be the same design due to prep and finishing time or can I add a little of a different color in each separate room?

@joehogan1648 Жыл бұрын

Hey Mitch why don't you need to use torch/heat gun to remove bubbles like you do when you do counter tops or panels? Thanks and awesome channel btw!!

@StoneCoatCountertops Жыл бұрын

You could still torch for technique and to remove air if necessary, most if not all the microbubbles incorporated by mixing can be popped with 91% isopropyl. It will take a few misting's waiting 10 min or so between. Torching would work also just not both at the same time!!! Let me know if you have any other questions

@mitchquist Жыл бұрын

You can still torch, you can also spray on 91% 3-4 times while working with it to pop them

@thhrc1 9 ай бұрын

Looking to do my basement floor. I have slope to my floor drains any extra prep I need to know ?

@tylerwinter512 3 ай бұрын

What wheel are you using for the grinding process???

@Kreative_Rainbow Жыл бұрын

I think that same mixture would be great on the venue floor as it has a wood/rustic feel.👍 Added bonus, matches coffee spills, although I know they would mop up great!! 😅 Good carpet colors for places that serve red wine or coffee!! 😉 Epoxy cleans better though!! 🤗

@StoneCoatCountertops Жыл бұрын

Great idea! Love seeing you in the comments all the time! Thanks for the support along the way!

@Kreative_Rainbow Жыл бұрын

@@StoneCoatCountertops You're very welcome!! 🤗

@GMS_MCMI Ай бұрын

Hey Mitch, My basement has a drain in the middle, so the concrete is perfectly smooth, but slopes towards the drain from all sides. Will the epoxy be alright with not perfectly level floor? Thanks. Graeme

@indigodolphin Жыл бұрын

No spiked shoes for the top coat? Seriously asking.

@chrmchannel3622 7 ай бұрын

material wise only how much did this project cost?

@chelo9879 Жыл бұрын

Que tipo de rodillo se ocupa para la capa final? Plis

@ytransportationllc7731 Жыл бұрын

Hey Mich I have tile in my guest bathroom can I do it over that

@adrianpenner5679 Жыл бұрын

Hey Mitch, love the content. I'm thinking of doing a back entrance/mud room/laundry room floor that gets absolutely murdered. Any thoughts on the longevity/wear of this stuff?

@StoneCoatCountertops Жыл бұрын

Very long time, use the non-skid with the UTC or Polyaspartic topcoat for best results. You can always reapply the topcoat in an hour or so of labor years down the road to get the floor to look brand new. The coating will bond very well if prepped properly like in the video

@Cozcacuauhtli Жыл бұрын

THANKS FOR SHARING

@StoneCoatCountertops Жыл бұрын

You're so welcome!

@raystoolbox Жыл бұрын

Hey Mitch As always I enjoyed the video. I have a garage floor that slopes toward a floor drain and an outdoor concrete patio that slopes away from the house. How concerned should I be about epoxy self leveling itself?

@StoneCoatCountertops Жыл бұрын

The metallic color coat layer will want to self level to the slopes. It doesn't run fast and is manageable. It can cause the design to flow to the low spots just keep that in mind when designing the marble. purposely steer some of the veins knowing they will slightly move. Pull up the drain masking if possible 2-4 hours after mixing when the material begins to set up. Or use a utility knife and score the perimeter of the tape and peel next morning when still fresh. Let me know if you have any other questions!

@heatherhorne3693 Жыл бұрын

Hey Mitch. In a garage are you able to put the epoxy on the raised part on the sides or would it fall off?

@StoneCoatCountertops Жыл бұрын

That sort of application is best for our Flake Flooring system: www.stonecoatcountertops.com/diy-flooring-epoxy With metallic marble the colors will run down the vertical!

@robertszerpicki8337 Жыл бұрын

Can you pour your clear coat over tile floor with grout?

@invalidrequest7795 8 ай бұрын

Hey Mitch! Do you have the Polyaspartic coat in a smaller size? I have a bathroom project I’m working on and this UV resistant top coat looks like an amazing product for my epoxy bench and trim! Can you help a brother out?

@StoneCoatCountertops 8 ай бұрын

We only have the 1.5 gallon size. Shoot me an email and I'll send over a coupon code to help ya out! Mitch@stonecoatcountertops.com

@kpnordic1000 Жыл бұрын

Hey Mitch I am looking to do a wood tabletop covered in coins is it possible? Thank you for all the great videos!!

@StoneCoatCountertops Жыл бұрын

Yes it sure is! I'll be doing a coffee table like this pretty soon. I'm going to put a 1 ounce per sqft layer of Art Coat down then put all my pennies down and let that cure. Then do a couple thin layers to fill in the space between and then over the pennies to make a level top. Let me know if you have any questions! I'd love to help you get a project started!

@kristineolver3268 Жыл бұрын

Hey mitch, is the polyaspartic top coat not food safe? Seems like it would be great for countertops otherwise so I'm assuming that's why we haven't ever been advised to use it on a counter

@StoneCoatCountertops Жыл бұрын

We're formulating this for our countertop system, not ready for that application. Great question though

@tarak9412 Жыл бұрын

Hey Mitch, I have a question. I am considering doing this on my cement floor in the basement. But, does it offer any insulating quality? I am considering doing a layer of spray foam on the floor first, would that work? I live in a colder area of Canada, so this is why I am asking. Also, can you start to provide in the description, the retail cost of the projects? Just an overall cost so a person looking at doing a project like this has a good general idea before going into the details.

@StoneCoatCountertops Жыл бұрын

The flooring epoxy offers some but not much insulation from cold concrete. I don't think spray foam would be the proper product to do what you're looking to do either. Maybe dense foam but on a floor I worry about denting or damage down the road. The epoxy will help a little though, put a throw rug down that would help a bunch too.

@chaddjensen9802 8 ай бұрын

Hey Mitch- My bathroom floor is a thin layer of trowelled on cement over 1/2" cement board. It has cracked multiple times. Do you think i could epoxy directly over that or would i be better off stripping everything back down to the [osb] subfloor? Thanks!

@StoneCoatCountertops 8 ай бұрын

If the cement board was installed properly with thin set under you could apply a layer of level quick let fully dry then apply the moisture seal epoxy primer. If the cement board is loose and not installed correctly you'll want to pull it up

@kelseyeells3035 Жыл бұрын

Hey Mitch the floor looks amazing!😁I have a question, I leveled my countertops with levelQuik RS I want to use your white epoxy undercoat because I'm doing a marble look would I apply it before or after the seal coat of epoxy? I plan on doing a seal coat, color coat then a flood coat. Thanks I love your videos they are so helpful I have learned so much 😊

@StoneCoatCountertops Жыл бұрын

Great questions! The epoxy bits really well to the concrete. If this was my job I would: Seal coat countertop with white tinted art coat 1-2 ounces per square foot of countertop and let cure. If the white seal coat covered enough you're ready for color coat, otherwise apply a couple coats of white undercoat let dry 4 hours Apply epoxy coat Apply top coat or clear coat Lemme know if you have any questions along the way -Mitch

@kelseyeells3035 Жыл бұрын

Thank you so much that was really helpful 😊

@cyclet4819 Жыл бұрын

Hey Mitch, I've been mulling over redoing my 5X7 wood bathroom floor with SCC epoxy. To be a little different, I was thinking of the granite look. Which method do you think will yield a better looking more realistic result, the Rust-Olean stone paints or the full coverage flakes?

@StoneCoatCountertops Жыл бұрын

That's a hard one! The rustoleum stone spray down over a faux paint floor could be an epic floor! The flake is the easiest system to install! Throwing chicken feed - the end! Installing over wood is simple too! No grinding. Fill sub floor seams with floor patch, sand back flat. Paint two coats of undercoat on floor let dry 4 hours Floor is now a giant countertop ready for flooring epoxy Lemme know if you have any questions along the way

@cyclet4819 Жыл бұрын

Will do and thanks for the response.

@AFO1 9 ай бұрын

Mitch, ow well will this holdup to wheelchair use? TIA

@cliffyrodriguez6287 2 ай бұрын

Hey mitch, this is what im doing now

@susansouthern6704 Жыл бұрын

Hey Mitch..I've got a solid but flat looking slate floor...could the top coat go over this to bring up the colours and shine..?

@StoneCoatCountertops Жыл бұрын

Any non pours surface needs a mechanical bond. If the slate is pours and will absorb some of the flooring epoxy you can go right over it.

@xraygraves Жыл бұрын

This question is not about flooring. Sorry but I wanted to know is it safe to use epoxy as a countertop or A certain type of clearcoat to applied different from the floor

@niluferozyoruk7718 Жыл бұрын

Could I do this to my terrace? I want to put some insulation underneath because my living room is just below and it gets really cold and hot easily.

@StoneCoatCountertops Жыл бұрын

The epoxy flake system is best for outdoor applications, great question. Learn more about both flooring epoxy systems here: www.stonecoatcountertops.com/diy-flooring-epoxy

@ravenclanx Жыл бұрын

Hey Mitch i was just wondering why you are wearing safety glasses? Is that something i should be wearing when working with epoxy? Awesome videos by the way.

@StoneCoatCountertops Жыл бұрын

You don't want to get the wet epoxy in your eyes. Best practice while mixing, its painful in the eyes. Corporate was here watching me film this video so I was on my best behavior!

@JVTigerLove Жыл бұрын

Hey Mitch! I recently purchased the epoxy floor kit about 2 weeks ago with earth blue metallic for my master bathroom (doesn’t say mid coat). Should I purchase the poly top coat and non slip? For floor protection and grip?

@StoneCoatCountertops Жыл бұрын

Great question, and thanks for your business! That flooring epoxy is still part of our new system. It's now branded as our flooring epoxy midcoat. For best adhesion over concrete, use our Moisture Seal Epoxy Primer rather than the flooring epoxy as a seal coat. Use the black or gray it will look great under metallic flooring. If u use the moisture seal, you'll have extra flooring epoxy since you won't be using some of that for a seal coat. We have either the polyaspartic topcoat or newly formulated ultimate topcoat for floors in both Matte and gloss, goes down easy! Here's a link to the new products: www.stonecoatcountertops.com/diy-flooring-epoxy Use code mix20 to save on the extra supplies

@JVTigerLove Жыл бұрын

@@StoneCoatCountertops thank you so much!

@dianasmith8166 Жыл бұрын

Dark marble with mica and swirls. What girl wouldn't like walking across a galaxy of stars to be married? Dark blue with silver stars and swirls of colored clouds of newborn galaxies.

@StoneCoatCountertops Жыл бұрын

Now were talking!!!!! Great suggestion and thanks for taking the time to drop a comment!

@matthewcesario2069 11 ай бұрын

Can you tell me how much it would cost for 1000 sqft concrete floor bowling ball looking epoxy??

@jmnitram6037 Жыл бұрын

Hey Mitch, what if you do moisture test and plastic is wet? Then what

@StoneCoatCountertops Жыл бұрын

Great question, I have a short video dropping on this soon. If you have moisture under the plastic, the next step will be to do a Calcium Chloride test: amzn.to/3myjvUK Stone Coat Flooring epoxy made for high emission up to 15pds per 1k. This test will tell you how many pds per 1k the concrete has. Its how much pressure will build up under the coating caused by moisture under the slab. Let me know if you have any further questions

@jayg9439 Жыл бұрын

nice Vid...what would a DIY price be on a job like that?

@StoneCoatCountertops Жыл бұрын

All the epoxy and colors needed for little over $700 www.stonecoatcountertops.com/diy-flooring-epoxy

@virginiam.olienechak5398 3 ай бұрын

Epoxy floor coverings.

@lewisjohnson2732 Жыл бұрын

Would like to have Blue & White for my Kentucky Wildcats room ! Just wished I could afford it! Being on disability stinks

@StoneCoatCountertops Жыл бұрын

Sorry to read this, are u located in Kentucky? Maybe I could come install it if you purchase the material!

@lewisjohnson2732 Жыл бұрын

@@StoneCoatCountertops yes I’m in Kentucky, that would be wonderful! I’ll let you know! Thank you 🙏🏻

@spross1000 Жыл бұрын

So there is no need for torching with this product?

@StoneCoatCountertops Жыл бұрын

Still compatible to torch if needed. I've been getting the microbubbles out with 91% isopropyl alcohol. The torch will still work too to help move spray paint veins if you're interested in that look

@ROBSCANINE Жыл бұрын

Can you tell me where I order

@StoneCoatCountertops Жыл бұрын

Sure thing: www.stonecoatcountertops.com/diy-flooring-epoxy You can order both the Flake and Metallic Marble here on this landing page. Over concrete or wood both substrates are compatible. Let me know if you need any help ordering. email me at mitch@stonecoatcountertops.com

@user-gj8ms7jd8v 2 ай бұрын

Do you think epoxy flooring would be ok from destructive animals? Cat nails, occasional dog pee? Floor had cheap square tiles, now uneven plywood (?) floor.

@BrianMason3636 Жыл бұрын

I think I’d do natural tones maybe.

@StoneCoatCountertops Жыл бұрын

Nice choice!

@cattameme Жыл бұрын

Easier than laying concrete or even painting a wall.

@StoneCoatCountertops Жыл бұрын

This one was pretty darn simple! It won't be much harder to do that giant building next to me just more time moving epoxy around! Thanks for watching and let me know if you need help getting a project started!

@user-lx4wt1kv7f 7 ай бұрын

God

@user-lx4wt1kv7f 7 ай бұрын

How are you

@ebmoore9192 2 ай бұрын

White or linen. ANYTHING WILL WORK WITH WHITE & it’s fresh looking all the time.

@sureno1833 9 ай бұрын

Brown color in a bathroom? Are you serious?

@timhurlburt5340 Жыл бұрын

Why does the Alcohol make it look pitted.

@StoneCoatCountertops Жыл бұрын

The alcohol helps to pop the microbubbles, meld and lace the colors. At first it looks like divots, when the alcohol dissipates the material will self level again, great question. Let me know how to help get your project started!

@timhurlburt5340 Жыл бұрын

Thanks for the reply.

@DavidBugea Жыл бұрын

I’m going to be upfront: I normally love your work, but those colors in that bathroom looks like someone didn’t make it to the toilet in time. Maybe it looks better in person. 🤷🏼‍♂️

@StoneCoatCountertops Жыл бұрын

HA! Appreciate your feedback! It does look very pretty and video or pic deff don't do the epoxy justice! Thanks for watching, I have a white/black/silver floor dropping soon, going over wood subflooring

@kimberlypetrossi6607 Ай бұрын

I agree! 😊 grey would look better

@allday2772 7 ай бұрын

This is resin. Nothing special.

@jovanmitic5579 Жыл бұрын

SUPER💪👏🥇👍👋

@StoneCoatCountertops Жыл бұрын

Thanks for stopping by! Do you have a floor needing some Stone Coat Epoxy?

@jovanmitic5579 Жыл бұрын

DA,ALI U MOJOJ ZEMLJI NEMA PIGMENATA I EPOX SMOLA JE PRESKUPA(1 LITAR=12-15 EVRA)MASTAO SAM O SVAKOM VASEM REMEK DELU,DA SAM U AMERICI,BIO BIH VAS UCENIK👍👋