Good teaching bro....its so helpful for me....thank u bro....waiting for more videos
@a.j.wilkes6352 Жыл бұрын
Thank you for explaining the acronym "PFL"=Pre-Fader Level.
@uniradio_cesena Жыл бұрын
Thank you king
@kaleolyrics2 жыл бұрын
so helpful Thank you so much!
@pbenson56fran9 ай бұрын
Question, how can I tell if a mixer accepts a wireless in ear monitors. I have a Behringer Active powered speaker. This was so helpful. Thank you
@360avrentals49 ай бұрын
Thank you. You will need a mixer that has multiple outputs to be able to send the mix to the different people who need to hear the mix. So, a mixer with multiple aux send outputs, or monitor outputs.
@pbenson56fran9 ай бұрын
@@360avrentals4 oh thank you so much. I appreciate you responding. Have a wonderful weekend.
@2_SmOoOth25 күн бұрын
I have 2 jbl xrk 100’s, and I’m trying to figure out why they won’t work 😭 I have a 32 input system so it’s a bunch to deal with.
@srihari20424 ай бұрын
I think that the input in Active Speaker should be switched to "Line " if not wrong. In JBL Eon 710 active Speaker I couldn't find the button of Line/Mic? Are there any other settings in that Speaker? Please reply...
@360avrentals4Ай бұрын
Thank you for your comment. I could be wrong, but I believe there is a small white tab on the back of the 710 that can be pushed in or out using a pen or some other small pointed object. This should allow you to toggle between mic and line level.
@bobbandera2597Ай бұрын
Shouldn't the power be off while connecting cables? Then power the mixer, then the speaker?
@pbenson56fran9 ай бұрын
Thank you very much
@mrtigerle2 жыл бұрын
Information is fairly good. Need to learn how to create instructional clip
@aspectmedia-uk Жыл бұрын
Can I use an XLR Y Splitter and take sound from both left and right channels from the mixer down to one XLR cable for stereo? Thanks
@alienvolt77412 жыл бұрын
I'm using a peavey pa 400 and need to power two 15' active speakers but the peavey amp only has 2 trs outputs (not the dedicated passive speaker outputs obviously) but a monitor and a main out, would it be convenient to get a trs to xlr cable to connect the speakers?
@360avrentals42 жыл бұрын
Yes. We recommend the 1/4 inch to xlr male adapter to run from the main out to your speakers. Thanks!
@kimalfar815 Жыл бұрын
Thank You GOD Bless 🙏
@360avrentals4 Жыл бұрын
Our pleasure!
@nowzen4240 Жыл бұрын
ok, now wait. I have a Mackie analog mixer very similar to yours and a K12.2 2000W speaker...I play pre recorded instrumental tracks and live vocals ( my own) with the set up. My XLR outputs (2) are on the back of the mixer but I only have ONE main volume slider on the mixer, Sooo should I be plugging in TWO seperate cables or maybe a split XLR cable (2--1) of sorts into my actual speaker to be sure I'm getting the stereo sound with both my tracks and my vocals?? I only see one input ( for the mixer) on the back of the speaker. This stuff may as well be GREEK to me. My ears are absolutely amazing, but my freaking overall live performance tech knowledge is absolutely the worst. I can't compute no matter how hard I try! I'm used to having my own sound techs for this! LOL.
@360avrentals4 Жыл бұрын
Thank you for your question. You should be fine with the current setup that you have. You would just need to run 1 output from your mixer to 1 speaker, and the other output to the other speaker. To get a stereo sound, just make sure that you position your speakers on opposite sides of the room (i.e. 1 speaker on the left side and 1 on the right side). I hope this helps.
@nowzen4240 Жыл бұрын
@@360avrentals4 I am using one speaker .
@360avrentals4 Жыл бұрын
@@nowzen4240 Ok. Well, with one speaker you will be limited to a mono sound. Your best bet is to position the speaker to where it is able to be directed towards the center of the room. Make sure it is in front of the microphone to avoid feedback.
@raviadagatla71032 жыл бұрын
Thank you so much...very helpful...Amazing!!!
@360avrentals4 Жыл бұрын
Glad it was helpful!
@willliu3025 Жыл бұрын
very educational.. thank you
@360avrentals4 Жыл бұрын
You're welcome
@pradipbulsara7909 Жыл бұрын
one channel will give you full spectrum of sound?
@360avrentals4 Жыл бұрын
Hi Pradip! I'm not sure that I fully understand your question. Each channel on this mixer allows you to adjust the high, mid, and low frequencies so that the sound is balanced.
@lokomono892 жыл бұрын
What if I have a base, do I connect it to the mixer or keep it with the speaker
@360avrentals42 жыл бұрын
If you have an active subwoofer, you can connect to the PA speakers by going out from the subwoofer's output directly in to the input on the PA speakers. Or, you can connect the main output from your mixer to the PA speakers and connect the mixer to the subwoofer by using an auxiliary send(post fader).
@hudson6578 Жыл бұрын
What will happen if you only connect one speaker to a mixer? Will it make a difference??
@theorganstudio4478 Жыл бұрын
Yes it will. Typically, the larger the room is, the more of a difference it makes.
@360avrentals4 Жыл бұрын
Yes. Exactly what the previous reply says. You typically should use more than 1 speaker in any room above 750 sq ft.
@victorjr7283 Жыл бұрын
Pwd po ba na from lineout ng powered speaker iinput ko sa line in ng mixer po?
@WWeiss-nv5vz2 жыл бұрын
Connecting only one speaker should your main channel balance be panned hard left?
@360avrentals42 жыл бұрын
I would recommend center pan. Thanks!
@SuAmigoElilegal2 жыл бұрын
Question please, I have 2 extra power speakers that I want to connect to my currect set up i have, but I do not want to plug then into The monitor input. I want full control on my faders L/R main output . Now i already have my 2 subs and 2 loud speakers running that I been using. So how can I add my 2 new power speakers into my set up im running, do I just plug Into one of my running speakers output and then to my second and third new power speaker
@360avrentals42 жыл бұрын
Yes. I would suggest that you loop the 2 extra speakers together. Use the output from your 2nd speaker to send to the 3rd and the same from the 3rd out to the 4th one.
@REX_0161 Жыл бұрын
Sounds like The Game
@SuAmigoElilegal2 жыл бұрын
Hello i have my mixer and my 2 subwoofers and my 2 tops loud speakers. I happend to have a third subwoofer. How do i connect that to my set up
@360avrentals42 жыл бұрын
If your subwoofer has a thru output, you should loop 1 of the 2 subwoofers to the 3rd one. If your subwoofer doesn't have a thru output, then you should use an auxilary send from your mixer to go to the 3rd subwoofer.
@petersmith2286 ай бұрын
Can i connect a mixer to my edifier desk top speakers which have rca inputs they are the R128OT Speakers, please advise.
@360avrentals45 ай бұрын
Yes. You should be able to connect with the proper adapters. If your mixer has an XLR output, you would need an XLR(f) to RCA (m) adapter to connect to your speakers.
@jecsarabia35614 ай бұрын
@@360avrentals4 does this mean you connect 2 sets of R1280DBs speakers (RCA) to the 2 main outputs (XLR) of the mixer? 1 set has an active speaker (L) that chains the passive speaker (R) so 1 set wired on the Left Main output and another set on the Right main output, which make 4 speakers total driven by the L and R main outputs. Appreciate your feedback!
@frankschwartz74052 жыл бұрын
>>How To Connect an Audio Mixer to a Powered Speaker
@brothersmotley71512 жыл бұрын
What is the name of your audio mixer
@360avrentals42 жыл бұрын
Hi. It's a Soundcraft 8 channel mixer.
@clav3284Ай бұрын
You don’t have a subwoofer?
@360avrentals429 күн бұрын
Thank you for your comment. For this particular example, we didn't use a subwoofer.