How to connect Lian Li Uni SL Infinity 120 fans (single and triple packs)

Рет қаралды 281,205

2 жыл бұрын

This is a video to show you how to setup and connect the Lian Li SL120 Infinity fans. Connecting up the single fans in group directly the your motherboard or using a triple pack and the included controller.
Please note links listed here include affiliate links which may earn me a commission. Find out more below.*
Amazon US - amzn.to/3u2n71Z
NewEgg - newegg.io/nc8259e593
CaseKing - tidd.ly/404MY8e
Amazon UK - amzn.to/3OfR9qz
Amazon FR - amzn.to/3tE5Z2m
Amazon IT - amzn.to/3tEACVi
Amazon DE - amzn.to/3mZVhiB
Amazon CA - amzn.to/3tEjvme
Others:
/ 1537784167013965824
Get the latest version of Lian Li L-Connect here - lian-li.com/l-connect3/
Features:
The infinity mirror integration to the SL INFINITY 120 creates a light effect that does not
compromise on brightness, creates a definite separation between the light layers, and adds an infinity RGB depth to the UNI FANs.
The circular-shaped infinity mirror at the center of the fan is visible and tuned to have multiple layers spacing 0.5mm between each, creating a clear multi-layer effect from any visible angle.
Inspired by the original UNI FAN SL, aluminum trims surround the side infinity mirrors that are located on both visible edges of the fan frame.
Each UNI FAN SL INFINITY 120 features a total of 40 fully addressable LEDs for maximum
brightness, the best infinity mirror look, and complete light effect customization.
Other highlights include the ability to change the direction of the fan cable so you can make it face the way you want. This makes cable tidying easy. You can also remove the interlocking mechanism to tidy things up in the case a bit more. Which helps!
usb splitters
USB Splitter:
Amazon US - amzn.to/3M0Ay8p
Amazon UK - amzn.to/3t1FGmn
Amazon FR - amzn.to/3M0AyoV
Amazon IT - amzn.to/3z4KCKX
Amazon DE - amzn.to/3NF8MzB
Amazon CA - amzn.to/3wUtxSr
Fan specs include:
Dimensions 120mm x 122.1mm x 25mm
Material PBT/PC/Aluminum
Rated Voltage DC 12V (FAN) & 5V (LED)
Fan Speed 0 - 2100 RPM
Air Pressure 2.66 mmH2O (Maximum)
Airflow 61.3 CFM (Maximum)
Acoustic Noise 29 dBA
Locked Current = 50mA
Bearing Type Fluid Dynamic Bearing (FDB)
Operational Voltage DC 12C & 5V
Start-up Voltage DC 6.0V
Input Current 180mA (FAN) / 600mA (LED)
Input Power 5.16 Watt
Warranty 2 years
Related viewing:
Lian Li Strimer Plus V2 review • Lian Li Strimer Plus V...
Lian Li Strimer Plus V2 unboxing and installation • Lian Li Strimer Plus V...
Lian Li Galahad AIO 240 unboxing install • Lian Li Galahad AIO 24...
Lian Li O11 Air Mini build • Lian Li O11 Air Mini b...
Lian Li AL120 vs SL120 • LIAN LI AL120 vs SL120...
Lian Li Uni Fan AL120 unboxing and setup • Lian Li Uni Fan AL120 ...
Lian Li SL120 Fans unboxing • Lian Li SL120 Fans unb...
🏆Big thanks to my super awesome KZfaq members:
SirSpawnsALot, Meatykeyboard, Beaster Bunny, JayShank007, Rawrr483, DStarastins, McFarty, Riggsy79, Chief Hao, Aaron Yarden, Geralt of Rivia and you? 🏆
🔫Sub to my gaming channel🔫 / @theprovokedprawnpews
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
Follow on Reddit / theprovokedprawn
Read this far? You're awesome. Smash those sub and like buttons!
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - teespring.com/stores/the-prov...
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com/shop/theprovok...
📸 Recorded with www.amazon.com/ideas/amzn1.ac...
Shure SM7B and GoXLR - • Shure SM7B and GoXLR M...
PLEASE NOTE
Affiliate links*:
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions.

Пікірлер: 686

@XxShantilisxX Жыл бұрын

best video ever. it took me 4-5 tries to find someone just hooking them up. everyone else's videos looked like Lian LI promotional videos and I just wanted to see how to properly hook them up. thank you for your service 💓

@TheProvokedPrawn Жыл бұрын

Thanks Gary. Glad to help, hope you enjoyed enough to subscribe 🦐

@TheRockford22 Жыл бұрын

Same boat! This helped a lot since the 3 groups of 3 with a single in the rear was exactly the setup I’m looking at. Only question is if I get a single pack for the rear will that still connect to the controller or no?

@HydrixTheory Жыл бұрын

omg same i could either only get the rgb to work or just the fans to spin not both it was frustrating

@theblackghost4246 Жыл бұрын

@@TheProvokedPrawn I’m confused, do I gotta connect the 3 pin 5v rgb header AND the usb to the motherboard or can I only have the 5v 3 pin connected?

@GuidoDePalma Жыл бұрын

@@TheRockford22 yes but using one of the (4) cable that comes with the 3 pack.

@zacharywickham7683 10 ай бұрын

Dude thank you for this. Was going crazy trying to find more connections on my motherboard as the 2 were already full. Life saver for a newb on his first build!

@aaronhwang7355 Жыл бұрын

I cannot describe how grateful I am to find this video and being able to enjoy this channel... Insanely helpful that you actually walked through each part of the fan package and how to set them up.

@TheProvokedPrawn Жыл бұрын

Glad to found it helpful. Hope you enjoyed enough to subscribe 🦐

@vevveyfonzo Жыл бұрын

Thank you for the very thorough video. I have made my own custom cables for the fans which involed new wires and soldering to the fan header connections. I tested my system but the fans were not spinning. In half panic that I have done something wrong and potentially fried my fans, I searched the internet if anyone else experienced this phenomenon. Your video came up and was able to answer my question and I could continue with the build. Nice instructional btw, and probably will come in handy for many!

@TheProvokedPrawn Жыл бұрын

Fantastic! Glad to hear it. Hope you appreciated enough to sub.

@martin-vg7hf Жыл бұрын

Thanx for taking the difficulty out of this install for beginners like myself. I have a lian li 2 case so i was thinking of new fans and lian li make the connectability very easy. Great vid mate, keep it up!

@TheProvokedPrawn Жыл бұрын

Glad to help. Hope you enjoyed enough to subscribe 🦐

@0c. Жыл бұрын

I cannot explain in words how happy and grateful I am, thank you so much for explaining this.

@TheProvokedPrawn Жыл бұрын

You're welcome. Glad to help. Say thanks by smashing subscribe, join or indeed, super thanks! :)

@silviomanuelbaez8360 Жыл бұрын

Awesome videos bro! Just finished my build, your lian li uni fans guides carried me through :D thanks again and keep up the good work, you are helping a lot of people

@TheProvokedPrawn Жыл бұрын

Glad to help Silvio

@user-vo2wc4qk5b 5 ай бұрын

@@TheProvokedPrawnHey, great video , but can I connect 3 × triple pack fans = 9 fans if I only have 1 argb headers on my motherboard. PLEASE REPLY

@nathancooke5269 5 ай бұрын

Yes you can, you can do up to 4 sets of 4 (16 fans) total on just 1 of the controller boxes and that controller box only needs 1 usb header (MB), 1 fan header (MB) 1 rgb header (MB) and 2 sata cables (power supply)@user-vo2wc4qk5b

@nathancooke5269 5 ай бұрын

@@user-vo2wc4qk5b not sure if it tagged you or not

@MrLantyy 5 ай бұрын

I cant tell which is more cleanly done.. the fans OR the video! Very clear overview 👍

@TheProvokedPrawn 5 ай бұрын

Glad you enjoyed it! Hope you appreciated enough to subscribe 🦐

@alexways1641 4 ай бұрын

lol thank you so much i was gonna give up on my first build bc i didn't know where tf the wires to the fans went and you just saved my life thank you so much

@Darkonyon 9 ай бұрын

I was just desperate to understand better how many USB, RGB and fans connections I would need to use 9 infinity fans, you just saved my life bro

@TheProvokedPrawn 9 ай бұрын

Glad to help. Hope you enjoyed enough to subscribe 🦐

@diablo_2raw954 Жыл бұрын

I got 12 fans in my case 😂 my wallet about to really hurt with these fans but thank you so much for being the only one to actually answer my question about the control and the amount i can plug into it

@zeiadosamaahmedngi3390 3 ай бұрын

Can you help me i don't undersrand how to control the fans using l connect software and not using motherboard software

@bio-nukes4136 Жыл бұрын

i was confused on what i needed to have plugged in and you cleared it up. thx

@Sportside311 9 ай бұрын

This is like, perfect. Every question and thought I had along the way was answered in perfect order. I'm just happy this video exists. It gives me hope lol

@TheProvokedPrawn 9 ай бұрын

Glad to help. Return the favour by subscribing 🦐

@SirRandallDoesStuff Жыл бұрын

This video made me get the fans. Also, thank you for showing how they all work. This video saved me time. Thank you!

@TheProvokedPrawn Жыл бұрын

Glad to help Sir Randall 👍

@VizMaior Жыл бұрын

Thank you for this video. I’m going to build my first pc and your channel is a huge help. Subbed!

@TheProvokedPrawn Жыл бұрын

Thanks Jonathan, I'm glad to help.

@nic0vide0 Жыл бұрын

I'm about to set up my fans and this is the most helpful video! Thank you!✌️

@TheProvokedPrawn Жыл бұрын

Thanks for watching. Hope you enjoyed enough to subscribe! :)

@GarySerrano Жыл бұрын

Time to pull my case apart and redo EVERYTHING. I think I need this Lian Li controller

@absolutelydialedgraphics Жыл бұрын

just built my first pc and was worried I did something wrong installing these fans but when I got to the part where you said Dont worry, install L Connect and the fans will spin, what a relief 😂 just downloading Windows now and getting ready to stick it in the new pc. thanks for the video, def the most accurate video on how to install these fans. You got my sub!!! And not trying to be weird, but your voice is extremely soothing 😂😂😂 I felt very relaxed watching this vid. thanks again bro🦾😎👍

@TheProvokedPrawn Жыл бұрын

Happy to help!

@maxkruppa3716 18 күн бұрын

The RGB lighting only works after you boot into Windows and then download the L-Connect software?

@mr.grizzly1321 Жыл бұрын

I recently got the V2 uni fans and the Galahad aio 360 and I love them. Your video was a big help.

@TheProvokedPrawn Жыл бұрын

Glad to help!

@BWILL10 4 күн бұрын

How many uni fans did you end up putting in?

@day_seeker 3 ай бұрын

Thank you so much for this video. I've been trying to do more research on these fans before I decided to buy them. You were the only one bothered to do this

@TheProvokedPrawn 3 ай бұрын

Glad I could help!

@adrian.adam7 Жыл бұрын

At this point, with all the reviews and tutorials, I might master how to setup the fans even though I don't have a single pack. Still waiting to be available in my country. Great vid though!

@TheProvokedPrawn Жыл бұрын

Hope you get them soon!

@REALLYRANDOMREVIEW5 Жыл бұрын

im loving the look of these fans and wouldn't mind upgrading to them sometime soon

@TheProvokedPrawn Жыл бұрын

They're great

@tylerweatherby7131 10 күн бұрын

I love how the provoked prawn has very similar taste in pc parts to me, it has made finding good reviews over the past year or two so easy, especially with his reviews actually seeming like a review and not just a sponsored product that he has to talk about, and i just subbed because of how much I enjoy his videos

@TheProvokedPrawn 10 күн бұрын

Thanks Tyler. Very kind.

@tylerweatherby7131 10 күн бұрын

Ofc, also would you happen to know how well these work with signal rgb? They supposedly work with lian li l-connect but I'm not sure how well it works@@TheProvokedPrawn

@pngfile_ Жыл бұрын

This helped a ton I was testing the fans on a makeshift rig out of old parts and was wondering why they weren’t spinning when I turned it on.

@TheProvokedPrawn Жыл бұрын

Glad to help. Thanks for watching. Hope you enjoyed enough to subscribe! :)

@gowhop Жыл бұрын

I just used this video to build my first pc! I just wanted to say thank you!

@TheProvokedPrawn Жыл бұрын

Glad I could help! Hope you appreciated enough to subscribe 🦐

@gowhop Жыл бұрын

@@TheProvokedPrawn Absolutely! I've been a Sub for a while now, and your videos never cease to be helpful. Thank you again.

@darthilli Жыл бұрын

I’m setting these up in my new case tomorrow, thanks for the great video. Subbed

@bodkins Жыл бұрын

Brilliant video thank you! Excited to try and set mine up now

@TheProvokedPrawn Жыл бұрын

Glad to help. Hope you enjoyed enough to subscribe 🦐

@lotust251 Ай бұрын

very well explained my friend ty so much. I don't need 1/2 the stuff I thought I needed. just the fans 🙂

@TheProvokedPrawn Ай бұрын

Glad it helped

@cpttazko8864 Жыл бұрын

worth noting, that you get the thick connector (from the triple box) 3 times total. so if you have a 3x3 + 1 setup you will be missing 1 cable for the single fan. so if you play on doing more than 3 groups, buy 2 triple boxes

@GuidoDePalma Жыл бұрын

they give 4 cables, not 3 :)

@RBrawl 2 ай бұрын

thank u i m building my fist pc and i was needing some tips and u helped me a lot im really grateful

@TheProvokedPrawn 2 ай бұрын

Glad to help. You might find this playlist useful too - How to build a gaming PC: kzfaq.info/sun/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z

@lemonsaresour631 Жыл бұрын

just saying: very thoughtful of lian li to create daisy chained fans because their cases need a lot of fans

@MrLAMY 8 ай бұрын

Thanks for the Video. Was easy to understand and helped me out alot!

@TheProvokedPrawn 8 ай бұрын

Glad to help you out 👍

@kennyflores5846 Жыл бұрын

Bought two 3-packs and they came with splitters for the controller-to-fan plugs. Which means you can connect two sets of two into one of the controller plugs. Crazy how much thought they put into this product. Hands down the easiest fans to work with.

@dhplayground Жыл бұрын

Yeah, I just bought 7(2 packs + single) and I m very impress with what came in the boxes, more cables then I will ever need. Thinking of buying another 3 pack and replacing my Galahad fans too now.

@twinstars8812 Жыл бұрын

Does that mean you can have 5 sets of fans plugged into 1 controller? (with 2 sets of the fan using the splitter and only occupying 1 slot on the controller) Thanks!

@tehMilcho Жыл бұрын

Beware the power limits there are reports of burned splitters because of overloading it.

@Mike8827 Жыл бұрын

@@twinstars8812 i think the maximum amount of fans is 16. however , if running that many fans on one controller , I would plug in the second SATA cable for sure .

@Mike8827 Жыл бұрын

Did you buy the SL Infinity version? Or SL V2? For my infinity fans i don’t see a splitter cable …

@10eLSe11 5 ай бұрын

Fantastic video, keep up the good work. Liked and subscribed

@TheProvokedPrawn 5 ай бұрын

Thanks a lot!

@coolcatsmooth0337 7 ай бұрын

Bro. Bro. SO useful man! Great video!! It helped me out a TON :)

@TheProvokedPrawn 7 ай бұрын

Glad it helped! Hope you enjoyed enough to subscribe 🦐

@AWolfsDeath Жыл бұрын

Thank you for explaining the rgb to mobo plugs

@TheProvokedPrawn Жыл бұрын

No problem 👍

@un5een83 9 ай бұрын

sh*t dude... your voice is made for audio books! pure gold!

@TheProvokedPrawn 9 ай бұрын

Thanks. Hopefully people like it for KZfaq too

@dhplayground Жыл бұрын

The only disappointing thing about the 3 pack, was the manual, had to scrape up the info here and there to find out the controller's capabilities. Wish I would of found this video an hour ago ;)

@musicsthearts7648 Жыл бұрын

The very first and educative video ever. In this case where did you connect the Galahad AIO Led? Big thumbs up for your work.

@TheProvokedPrawn Жыл бұрын

The Galahad was already installed to be honest (from when I did that video), so I didn't mess with the wiring or use the new control box as I probably could have.

@musicsthearts7648 Жыл бұрын

@@TheProvokedPrawn I asked because I have 9 UniFans connected with one controller(with non space left) and I don't know how to connect the Galahad Led connector. Can you help me with?

@TheProvokedPrawn Жыл бұрын

@@musicsthearts7648 connect it to the RGB header on your motherboard?

@musicsthearts7648 Жыл бұрын

The thing the AIO LED cable is made to be insert into the controller box. But there's no space left since the fans with rgb are connected in all 4 modules of the controller.

@frostedflinks 8 ай бұрын

Helpful video! And believe it or not i did connect them wrong 😅

@punchspelledbackwards Жыл бұрын

Hi! i love ur videos, ur voice is so calm. can u add like timestamps in the description? that would be very helpful

@TheProvokedPrawn Жыл бұрын

I want to but it takes so much extra time, time that I could spend making more videos. 😭

@punchspelledbackwards Жыл бұрын

@@TheProvokedPrawn Makes sense

@Absolyst Жыл бұрын

Great vid, very informative. Hoping you or someone else can answer this: if I had the controller hub and wanted to forgo using L-Connect by connecting the PWM and RGB cables to separate controllers instead (in my case, an Aquacomputer Octo and Farbwerk), how exactly does control work for the fans? Would the controllers detect all the fans connected to the hub as one fan and thus mirror settings across all fans? Or will all the fans be recognized individually, allowing for individual speed and RGB control?

@simplydaviddang Жыл бұрын

Thank you so much for this tutorial!

@TheProvokedPrawn Жыл бұрын

You're welcome. Subscribe to show the love.

@imxnarch 4 ай бұрын

Great guide! Does the triple pack of fans come with multiple of the 2in1 power and RGB connections? (the flat connector that connects to the box) So for the 10 fan setup demo'd in the video, I would be able to buy a single triple pack, and 7 single fans, and have all I need to connect them all? Thanks!

@wickedbandanadude 7 ай бұрын

Wonderful explanation. Thanks !

@TheProvokedPrawn 7 ай бұрын

You are welcome! Hope you enjoyed enough to subscribe.

@chris747f 2 ай бұрын

That was an extremely helpful video

@TheProvokedPrawn 2 ай бұрын

Glad it was helpful!

@notmenowhere 4 ай бұрын

Thanks for the video. This is super helpful. Quick question, if I replace an GPU AIO fan with these Liam li fans, where would I connect the fan control? I know just like cpu aio I can connect into the sync slot for rgb control.

@DaveTheRave81 Жыл бұрын

can you use a y-splitter to connect a single fan to a row of 3 so back extract & the 3 fans on the top of the case & then connect it to the control box in the back ???

@hawky2k215 2 ай бұрын

Damn nice fans! I'll be buying them

@MrSamadolfo Жыл бұрын

🙂 neat, thx for explaining the wiring

@CyberWallX Жыл бұрын

Great video man. I love your voice lol Not that cringy typical youtube content creator wannabe news station fake speaking if you know what I mean. Kind of soothing. Noob question: Do all current MBs have that USB header? Probably yes, right?

@TheProvokedPrawn Жыл бұрын

Yes they do. Most have two in my experience

@midegola5623 Жыл бұрын

thanks this video was super useful, im trying to get my hands on 9 120s, and 3 140s, but its like the 140s dont exist i cant find then anywhere

@nmusic4u311 9 ай бұрын

hey, great video. Quick question. How many of this connection cables do you get with this? Enough to connect these 4 groups of fans?

@brodylockwood14 Жыл бұрын

Mate that mini pocket knife is the cutest knife I've seen lol

@TheProvokedPrawn Жыл бұрын

It's a Wish special 😂

@craigrobb3206 Жыл бұрын

Thank you for the great video. Regards the controller in theory if you have OL11 Dynamic XL, same 10x SL Infinity 120 arrangement as your video (3xfan group side, bottom, Galahad 360 top and single rear) both 24 & (3x8 gpu) strimer V2 cables. How do you connect the fans, strimers & Cooler controllers or would one of these triple fan pack controllers manage to link & control everything? Would it be the Galahad in sync 1 and the strimer controller in sync 2? Thanks again

@bentleymurray794 10 ай бұрын

Thanks a lot for this. This is one of the best tutorials I've come across. I have one tiny question. I went out yesterday and the infinity fans and did this setup you have here. Installed the fans and only one set of 3 light up and spin, all the others do not do anything. I tried switching the port on the controller but only the same 3 working. Any ideas what could be happening?

@TheProvokedPrawn 9 ай бұрын

kzfaq.info/get/bejne/rtN8fLhllbuzhn0.html

@arcticridge Жыл бұрын

That knife.. is adorable.

@TheProvokedPrawn Жыл бұрын

No one is getting shanked by it. That's for sure.

@almouallimifamily339 2 ай бұрын

Best guide and explanation ever

@TheProvokedPrawn 2 ай бұрын

Glad you think so! Hope you enjoyed enough to subscribe 🦐

@almouallimifamily339 2 ай бұрын

Sure thing, I just realized I didn't but when I came back to vid cuz i wanted to ask u, i have galahad 2 trinity radiator and UNI SL fan and TL LCD fan, the question is can i use the controller of the uni sl fans with the tl lcd ?

@brol1k 2 ай бұрын

Thank you for this. I have 3 sets of fans like in this video, except my AIO cooler is the Galahad II LCD. I have the case fans on the SL controller, the AIO & it’s 3 fans on the AIO controller but the rgbs aren’t syncing with the other fans. In the L connect app it’s on its own and have to configure it separately from the case fans. Anyway to sync them all together?

@michaelgurov4196 Жыл бұрын

Hey! Thank for the video, as I see you are using ROG STRIX motherboard in the last part, so the LL hub will let you control these fans in the Armory Crate and will detect as separate chassis fans (groups) ? At the moment I have AL model of fans, and I had them plugged to the PWM motherboard header directly, as the motherboard could not detect them in the bios.

@brianjohnston2168 Жыл бұрын

Very informative video thank you, question, if I only wish to use the fans through L Connect and not the motherboard, do I still need to connect the ARGB cable? Or can I just connect the two cables that come with the fan into the hub? Thanks.

@TheProvokedPrawn Жыл бұрын

If you're just using L Connect then you just need to connect the power and USB connections.

@MrDimkur Жыл бұрын

Awesome video, detailed and high quality! But since I'm not the brightest and may have missed this part, I'd just like to confirm: 1.A single pack fan, will work just off of the motherboard connectors and does not need the controller? 2.Can the RGB and fan speed be controlled via the motherboard headers and software, or do I need to install Lian Li's proprietary software?

@TheProvokedPrawn Жыл бұрын

Correct

@TheEightTofu Жыл бұрын

@@TheProvokedPrawn the single can just be plug in cpu fan header? im planning to use it as a cpu fan

@user-vo2wc4qk5b 5 ай бұрын

Hey, great video , but can I connect 3 × triple pack fans = 9 fans if I only have 1 argb headers on my motherboard. PLEASE REPLY

@JF42506 Жыл бұрын

Thanks for the video Prawn! I have 2 groups of 4 and after I downloaded L connect 3 the top fan in both strings quit lightning up, the fans still work and I can change the speed, but no RGB and just in the one fan on each..?

@krischanhapunkt2598 12 күн бұрын

This helps me alot

@JustLostTheGame Жыл бұрын

Hey mate, awesome video, really helpful! Is it possible to use the controller without the Micro USB cable? I have all fans plugged in, 3 groups of 3, one solo for exhaust, into the controller ports, the PWM and ARGB connectors plugged into my board, and ignored the Micro USB cable because I didn't want to use LConnect. However, when I turned on my system, no RGB came through for the fans, but they were all spinning. Is that the reason why, not using the Micro USB? Thanks in advance!!

@jamesbradford3111 27 күн бұрын

Awesome video!

@TheProvokedPrawn 27 күн бұрын

Glad you enjoyed it. Hope you appreciated enough to subscribe 🦐

@davejnrhenare Жыл бұрын

Awesome video thank you 🙏

@TheProvokedPrawn Жыл бұрын

You're welcome Dave. Hope you enjoyed enough to sub!

@dampo2754 Жыл бұрын

Ty, now I know how to setup my 9x fans yyo my 011 d EVO Chassie 😍

@TheProvokedPrawn Жыл бұрын

I aim to please. Hope you enjoyed enough to sub.

@Garfield_2.0 9 ай бұрын

Hey there! Thanks for the vid Iit will definitely help me a lot when I eventually build my pc. My question is is it possible to connect 9 fans like 3 3pack with 3 fans as an aio, 3 (connected together) as intake and the last 3 is separated into 1-2 fans. Is that possible to power since I will have 1 120 size fan space on the rear and 2 120 in the bottom. Is that possible? Case is hyte y60 researched how mount 3 fans on the side so there will be 3 on the side 3 on top with radiator(aio) and 2 in the basement 1 in rear

@EG-O 9 ай бұрын

nice i bought 10 of these fans for my build just now, they will arrive tomorrow. :) I was wondering how am i gonna connect all 10 fans, but it seems like one controller is all i need. as 3 fans will be at the bottom, 3 on the side, 3 on the top and one on the back. Thanks for the help

@TheProvokedPrawn 9 ай бұрын

👍👍

@AzaGames Жыл бұрын

I want to thank you for this video as I built my PC today and the inf-fans do not spin and gave me a big headache, if it wasn't for this video I would still struggle with cables to figure out why the fans don't work. Lian Li's guide did not help at all.

@TheProvokedPrawn Жыл бұрын

You're welcome. I'm glad to help! Hope you enjoyed enough to subscribe.

@Mike8827 Жыл бұрын

Thanks for the informative vid! I own a Galahad Aio (non Uni fan version ) and want to change the fans that come with it for 3 SL120 infinity fans . How do I connect those 3 fans on the cooler to the Uni Hub? Via one of the 4 fan ports? Or the sync port ?

@zacharychristman1282 Жыл бұрын

they daisy chain so you would have one connector into one of the four fan ports. I just did this myself (make sure the fans are oriented the right way to blow air out of the case haha)

@Oddish08 Жыл бұрын

Just got 10 infinity fans.. miss my corsair fans.. sooo much more adjustability in ICUE!!!!

@kallht2079 8 ай бұрын

Thank you for the video! Just one question, can I also connect 140mm sl infinity fans into the hub. It ought to work, right? :)

@TheProvokedPrawn 8 ай бұрын

Yes

@AlexandervanScherpenseel Жыл бұрын

Thank you for the video! They really look great. I might have missed it, but I'm missing the part of the blow direction of these fans. Looking at your set-up, I'm guessing the infinity circle side is the intake and the sticker side is the outtake? So it's blowing from infinity towards the sticker. No way to swap these I guess?

@TheProvokedPrawn Жыл бұрын

Correct

@johnfraser6013 8 ай бұрын

Thanks ~ relevant info. 👍👍

@sergeykrutiyenko5244 10 ай бұрын

excellent video but in my uni fans lian li sl-inf 120 3 pack i dont have spliter cable only single cable coming ouut of the fans and should go only to the controler. Im trying to use with ryuujin 2 360 but fans must go only to lian li controler

@raisingzPT 4 ай бұрын

I had to order 9x single fans instead of 3 packs due to shipping constraints. How can I solve the issue of not having the controller specific cables now? I'm thinking about ordering the controller separately, but from your video I realized I need a different connector on the fans from the ones that are supplied by the single units (which ends in 1 argb + 1 pwm outputs)

@dhLotan 10 ай бұрын

Does the single fan connect to the controller as well? You showed it had a PWM/ARGB connector and those dont go into the control box you showed. Im hoping the single fan comes with some kind of adapter to let you route a single and groups into one controller.

@MarcoTechExperience Жыл бұрын

Hi. Where are the SYNC effects gone in I-Connect 3? I mean the Meteor Sync or Runaway Sync. Heaving one color startin from the upper left corner and ending on the left bottom corner, and back?

@MonsterCanMike Ай бұрын

Just curious with the single pack connector can you hook that up to the control box as well?

@TheCjividen Жыл бұрын

This video is really helpful but one of the questions that I have is that if you get the three pack how many connecters that plug into the fans do you get in the three pack. Because my next pc build im looking into these ones and im getting 2 140mm and 3 120mm but one of the 3 is going on the back by its self

@zacharychristman1282 Жыл бұрын

I think mine came with three or four connectors in the three pack so you should be fine.

@TheCjividen Жыл бұрын

@@zacharychristman1282 alright thank you for letting me know

@beorn8988 Жыл бұрын

Thank you for the video! :) I have one questions about the fans: is there some plug or sticker in the box to cover the holes from taking out the connecter clips?

@TheProvokedPrawn Жыл бұрын

Sorry I don't understand the question

@beorn8988 Жыл бұрын

@@TheProvokedPrawn I'm sorry. English isn't my native language... :-/ I'll try to explain: @5:30 you're holding up 2 fans. The right one got two removable parts (i thought thats called a clip), that are used to connect two fans. If they are removed, there's a hole left. Is there something in the package/box to cover the holes?

@TheProvokedPrawn Жыл бұрын

@@beorn8988 no, nothing else in the box

@beorn8988 Жыл бұрын

@@TheProvokedPrawn Thanks a lot! :)

@twinstars8812 Жыл бұрын

I have the Air Mini case as well! Trying to setup it up exactly as yours. So it's 5 sets of fans with 2 controllers. All fans are going to the controllers, and controllers to motherboard right? Is it possible to have all 5 sets of fan plugged into 1 controller (using a splitter for 2 of those sets), on Lian Li's manual it seems doable, have you tried? Thanks!!

@cssq. 3 күн бұрын

Hey mate with lian li infinity fans if so tryna figure out if it would be compatible with the king 95 pro case in this configuration the 4 front fans would be 140mm reverse blade fans (so intake) the bottom 3 fans would be 120mm reverse blade fans (so intake) the top 3 120mm fans on the aio would be exhaust then the one on the back of the case is a exhaust curious if they could use the built in fan hub on the case or all would work with the included lian li fan hub in the 3 pack thanks heaps for letting me know

@kennylorentzon 9 ай бұрын

Great video! Thanks.

@TheProvokedPrawn 9 ай бұрын

Glad to help. Hope you enjoyed enough to subscribe 🦐

@kennylorentzon 9 ай бұрын

Sure did! :) @@TheProvokedPrawn

@siegeyhuge Жыл бұрын

Hey bud - thankyou for this video, awesome stuff -subbed!! Does anyone know how to connect these to an AIO? I have the three pack/ a bunch of individual fans - hoping I can get them onto my AIO without caussing grief (aka want the AIO to control the fan speed)

@walterwilmoth8390 2 ай бұрын

I just commented on the other video about the different contrillers So i can use the triple pack controller with the lcd aio ?

@G.L.R.K 8 ай бұрын

Can these be used in a way, that one is exhaust and two are intakes?

@MrWiki_ 7 ай бұрын

i only watch 45 seconds of the video and i just had to comment, i want this little pocket knife lol that in itself made me like the video

@valdooo._2xx Жыл бұрын

Great video! Can you power these fans with a 12v rgb header I’m planning on building my first pc and don’t know much

@TheProvokedPrawn Жыл бұрын

No.

@valdooo._2xx Жыл бұрын

@@TheProvokedPrawn ok thanks

@nickbirt2860 Жыл бұрын

Great Video, thanks so much! Quick question....If im doing a new build (Dynamic o11 XL Case) and using 9 fans (3 x Multi packs) with 3 on a Kraken AIO top mounted, 3 side and 3 bottom mounted, will the fact they dont spin until the software is installed cause me an issue with cooling (CPU) whilst getting windows set up and then installing the L-Connect 3 software? Thanks

@TheProvokedPrawn Жыл бұрын

You'll be ok, I had to do the same. You should have enough ambient cooling as long as you aren't trying to game before you install the software.

@nickbirt2860 Жыл бұрын

@@TheProvokedPrawn Perfect! Thanks so much for the info and quick reply 👍

@DieAbfackler Жыл бұрын

Great video it helped alot. I got a question, maybe you could help me out. I recently (2 days ago) bought the Uni fans SL 3 pack (not infinity) and now i am thinking pf adding 2 Uni fans SL INFINITY, but i want to by them as 2 singlepacks. I dont think that i can connect the 2 Infinity fans to the provided L-connect controller from the 3 pack SL ones because the kables are proprietary, can I? So if I cant connect the Infinity fans to the L-Connect controller i would have install them directly to my Motherboard, will i then be able to use the L-Connect Software for the Infinity fans? I am new to the rgb game. Thanks in advance!

@kenny9088 Жыл бұрын

No. In order to use l connect to control any fans, the fans need to be plugged into the controller box. If you plug in any fans to the MB then you have to enable the option to control with mb on the l connect software

@DeinielMas10 Жыл бұрын

How do you synchronize the RGB of one Infinity fan (connected to CPU fan header) to 3 other groups connected to the L controller? I am thinking of using one Infinity fan connected to the CPU fan header and 4 other Infinity fans connected to the controller (connected to the system fan header). But what do you do with the RGB connector of the CPU fan to sync with the fans connected to the controller?

@tomb6641 Жыл бұрын

if you just use the sys fan headers and not the RGB ones, will the fans still function as normal, just without the RGB?

@hardcoregary8427 Жыл бұрын

Thanks for clarifying the fans not spinning on start up. I thought I bent a pin or something.

@TheProvokedPrawn Жыл бұрын

It was a panic for me too 🤣 apparently it's because of the fact the fans can go to zero rpm and so that's what they default to

@NerdTouchingGrass Жыл бұрын

these are crazy fans but idk if i can get behind fans that cost more then the case you put them in even with a fairly high end case.

@simpledanman Жыл бұрын

But can I plug the fans together, then plug the single wire into an ARGB hub and gain the same level of control? Or do I need to separate each fan and wire them to the hub individually?

@fansgamer1581 29 күн бұрын

Thank you so moch every things is clear and good. And I have a qusthion, I have o11 evo dynmic case, and I want to pay 3 packs of fans and one single fan pack, But I want to use one Lconnect controler, if I cant; I want to use just 2 Lconnect controlers, and I have a Motherboard RGB backplate and I want to can control the fans and a Motherboard RGB backplate, how can I do it? please.