Eventually LL will get over these teething problems but they need to do it quickly, they're making such great products but these sort of problems scare off buyers that are not power users. After having to update my firmware for L2 for my no-mark SL controller with Ene ISP Tool, I was impressed that L3 updated straight to the latest firmware rather than having to manually flash the controller like before avoiding alot of the risk of bricking it but it really should've been implemented that way earlier. I already know a friend who has put LL in the "too hard" basket and gone back to Corsair which is a shame because theres likely alot of other users out there like that but its great to see them slowly getting it together.

@@xZephYx Hello and welcome back. I partially agree with you. Not everyone is tech savy, in that case, it would be best to engage a SI to do the build. If wanting to build a PC, these are the challenges, not everything is perfect. I did have a fair share or problems but had it narrow down and resolved it. going through the pain with Lian Li tech support via email. nevertheless I got my issues fix. Now as what you have mentioned, I totally agree with you. Maybe should release beta testing on the L-Connect 3 to the public, instead of just 30 person. As you can't be sure those 30 person will give feedbacks or providing issues, globally it does. This will help consolidate the errors and to prepare a better application before releasing it.

Hi Kleo i have with my new Uni Fans Sl 120 Rattling noise brand new i Return the fans to the seller. Have you that Problem often or its that a rare case that brand new lian li fans a defective. So i have now L-connect 3 and all my old Sl 120 fans quiet mode. Butt Pvm Funtion its not here by now. thank you

@@Patrick-pv4ud Hello welcome to my chanel, be it SL , AL or SL inf fans, I do not have this issue. I believe is a rare case. all is needed is a replacement, since it's under warranty. as for the PWM on L-Connect 3. make sure the application of L-Connect 3 is reading your CPU or GPU temperature. else it will not work.

@@KleoYan yes it read cpu yeah i get a replacement. But its rare but impossible that brand new fans a defective. Can you make a video when you have a solution or rattle fan noise thanks best regards Kleo

Hi Nox, I am glad you are still supporting me. how are you my friend? By the way am flattered. Thank you for the compliment and I am still trying to perfect my video taking. it still looks horrible compared to other KZfaqrs.

@@KleoYan oh really, I didn't notice that as I care is your content details. That is more important. Keep up the good work Kleo 👍

@@noxmu4715 thank you as always 😊

Hi Rui Sousa, welcome to my channel. If you need other Lian Li ARGB eco system. You can always refer to this playlist, just need to take note of the sub title which has [L-Connect-3] which is the current application kzfaq.info/sun/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm&si=S_hODBlqF98Girtm

Hello Luong Time, welcome to my channel. I am glad you like this content and thank you for your feedback. 😉

@@KleoYan To your point at 7:30, I have 5 fans therefore i am assuming it will need to connect to another port on the controller?

@@luongtime5364yes it is best to have only 4 fans max to a port.

Hello Morganatic Chaos, welcome to my channel and you are most welcome.. all the best with your new build too. 👍

Hello ObscenePizza, welcome to my channel and you are most welcome.

Hi Emil -, welcome back and thank you for your valuable feedback.

Hello birdsoup777, welcome back. So sorry to hear the minor mishaps and thank you for the feedback. This is good piece of info you've shared. Hopefully it will help someone having the same issue as yours.

Hi David sun, thank you for the feedback. You might want to watch the series which have the subtitle [L-Connect-3] kzfaq.info/sun/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm

Hi Conicrick66, welcome back and thank you for the support. yup all thanks to them, infact without them, I would not have done so much content about these uni fans kzfaq.info/sun/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm 😉

Hello Heran Buddhika, welcome back and yup Lian Li did took sometime to refine this product but there are some whom might not like these fans too but I guess is up to individual preferences. Thank you my friend for visiting and to leave your valuable feedback 😉

@@KleoYan BTW do you know any good place to buy Lian Li products in Singapore? I recently moved to Singapore

@@heraNbUdDHikA hi you change either shop at Sim Lim Square and to compare prices on pc part, or hop on to online platform like shopee or Lazada (please check on the credibly of the online shops before purchasing and make sure is of a reputable Singapore shop).

hello IX GOODSPORT XI, welcome to my channel, if you are new to these uni fans and to save all the trouble to troubleshoot. btw am not saying they are difficult to install as majority of them just hurry to install or to plug these fans and they have issues which were fix by some of my troubleshooting guide. Before you plug and install, it will be good if you can watch this video and I hope it will help you out too. kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html .. thank you to have visit and to leave your valuable feedback. All the very best with your build 😉

Hello Dexter Gilapay, welcome to my channel and Happy New Year. Am glad you like my content. If you ever run into issues you can watch this vid too kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html

Hi X-CON-X, welcome to my channel, if you run into issues, there is another video that goes in-depth on how the L-Connect works kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html, all the very best with your build too and thank you to have visit.

Hello Tremor flow, welcome back again and oh no. These fans have attracted you 😱 but it’s of a good cause. They are very well build and with lots of features. Will need to test out their airflow with another video. 😬

I got my infinity's today and I can tell u they move even more air and are quieter than the SL and Al fans The infinitys are awesome

@@JJ-gk5tn nice. Thanks for the feedback buddy 👍

Hi ABHIJIT PN, welcome to my channel and thank you for your valuable feedback,. this playlist might aid you. kzfaq.info/sun/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm&si=VezmbuMTkYJFLyiS

Sonicrick66, welcome back. yup I do agree that EVGA are good motherboards, no doubt about it, but if you are to use the controller and not directly connected to your motherboard argb, that will not be an issue. As the power drawn for the argb are directly from the controller. Unless you got individual package that does not have the controller, then will need to take note of the ampere load, provided on your motherboard argb header.

@@KleoYan I will be using Lian Li controller better. it does not interfere with my mobo at all so is good.

@@Uglylizard66 am gald everything work out fine for you. 👍

Hi Julie, welcome back and thanks for your valuble feedback and you do have a point there. it will be nice if they do have the feature on the LEDs that act accordingly to the CPU temperature.

Hello Dimitrios laokeim, welcome to my channel and yup, they are indeed beautiful to look at. A combination of both SL and AL. 😉

Hi SanteeNL, welcome to my channel. Yes they are insanely good hahha. Far more better as compared to the AL and SL, in terms of it’s flexibility on cable connections and functions. These fans are well engineered which I appreciate most.

Hello Down Under Garage, welcome to my channel. Thank you for your feedback, Do pardon me as I have no clue of what you have mentioned, do you mind to pass your valuable feedback to the actual Lian Li tech support here? lian-li.com/faq/ . Once again, thank you to have vist and pardon me of the ignorance.

Hello Haies, welcome to my channel and indeed these inf fans are beautiful😉

Hi ya, I guess is up to personal preference. I myself like the black ones as the effect pops out better.

Hello Adam Cramer. Welcome to my channel. You might want to try the steps below. Best to do from the very basic up. Basic Troubleshooting steps Disclaimer : Though the chances are very low to brick firmware updates on motherboard and to any controllers. I will not be responsible if you have brick your motherboard or controller. 1) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller kzfaq.info/get/bejne/q7OXiLyaxtHUqIE.html 2) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version. 3) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html 4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second 5) While waiting, please do not use KVM switches. Disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard. If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead. 6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller. 7) Plug the power cable and turn on your PC 8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller. 9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16) 10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON. 11) Reboot your system. 12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed. 13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16) 14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again. 15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses) 16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file. Here is another video explaining how L-Connect 3 should be in order to have it work perfectly. kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html

Hello Commitedexile, welcome to my channel. Maybe go through the baby troubleshooting steps from this video kzfaq.info/get/bejne/oOBnlbaDu7qaomg.html might help you. Have to be patience and to narrow down the issue you are facing.

Hi Jan Dremelj, welcome to my channel, I believe this will help you out kzfaq.info/get/bejne/pM2aaNN4tsjYj40.html

Hi IPJR S, welcome back and thank you for your valuable feedback .

Hi THE PanzerBoy, welcome to my channel. Just to check, in windows, on the device management, under Universal Serial Bus Devices, do you see two SL-Inf device listed? if you only have 1, you should check the usb conntection of the SL-INF controller which you can't control. Legend, SL-INF-1 controller and SL-INF-2 controller. 1) Check to ensure both uni controller shows under device manager under Universal Serial Bus Devices 2) If its only showing you one. Lets say SL-INF-1 controller is detected, check and reset SL-INF-2 controller's USB cable or to reseat it to your motherboard USB Header. 3) If no reaction, swap the USB cable of SL-INF-1 and SL-INF-2 controller. this is to narrow down if it's a USB Cable issue. Lets say before swaping, SL-INF-1 is working, after swap, SL-INF-1 controller does not work, instead SL-INF-2 controller works. This tells you that your USB Header are working fine, both controllers are fine but one of your USB Cable faulty. 4) even after swaping at step 3. still SL-INF-2 controller not working. swap the controllers. Lets say SL-INF-1 controller is working well on motherboard USB 2.0 port A, swap the SL-INF-2 Controller to Port A and SL-INF-1 controller to Port B. this way it will narrow down if it's a port issue. Test these out. It can be cable issue, controller issue or even motherboard USB 2.0 Header issue.

Hi Dester, all this while there are no daisy chain cable on uni fans as the fans themselves can chain to one another.

Hello OG GigaChad, welcome to my channel. Nope as it does not have individual control for the side infinity mirror. The L-Connect 3 only able to control the blade or the frame at the top. Unless u set brightness to the frame to zero then only then blade will hade the lights on.

Hello Benny Thomas, welcome to my channel, maybe this might help you kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html

Hello Shinsej Taizen, welcome to my channel, unless your motherboard argb program have that function, else will not be able to. The uni fan family will work with the controller as there are specific burn in chip to follow the instructions from the L-Connect 3 application.

Hi Regil Calmba, welcome to my channel. you can use the spare cables (7pin) which comes with your 3 set pack (there should be total of 4 x 7 pin cables) use that when you daisy chain your single pack fans together.

Hi David Sim, welcome to my channel. If you have purchase the 3fan pack set. It comes with a uni controller. You do not need to connect the argb cable from the controller to the motherboard argb. All is needed is just the sata to your controller and follow by the usb cable between your controller to your motherboard usb 2.0 header. Afterwhich, install the L-Connect-3 application and to make use of it to control the argb effects.

Hello Al ex, welcome to my channel. Yes it does fit.

Hello Rusty Waldron, welcome to my channel. If your motherboard does not have those argb or rgb header. You can plug only the usb and sata to your uni controller. Make use of L-connect application to control the argb effects.

@@KleoYan It does have I think 1 or 2 RGB headers, just not ARGB

@@rewalston hi. You should not use those, Infact you can’t plug the 3pin argb connector to it. Plus those rgb header on your motherboard are 12volts and not 5volts. As mentioned plug only the usb cable and the sata cable to the contoller and make use of the L-Connect 3 app. You will be fine 😉

hellow The_pinkfreak231, welcome to my channel. I do not encounter the issue you have. you might want to unplug and replug it back. make sure you power it down before you do that.

Hi Akumu, welcome to my channel. Yes I am able to use the single pack with the triple pack controller. all is needed is to use the triple pack cables and to apply on the single pack fan.

@@KleoYan thank you for the answer!

@@akumu7140 you are most welcome 😉

Hello wastedspace, welcome to my channel. how many controller are you using and are you using any KVM switches, like monitor kvm? if you are, that might be the issue of the freeze, sames goes to too many USB devices plug in your system or too many controller but not using proper powered usb hub spliter. you might want to watch this which gives you some idea why your system is freezing. kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html

Hi Железный, welcome to my channell, yes you can do that. here is an illustration of what I did. kzfaq.info/get/bejne/q7OXiLyaxtHUqIGi.htmlf this kzfaq.info/get/bejne/l5yljKpyyMi9j4U.html

Hi Carlupi CLIPS, welcome to my channel. You do not need to plug the argb cable, make use of the controller to set the argb effects will do.

@@KleoYan oooh you save my life, thanks so much for answer. !!

@@carlupiclips2567 you are most welcome and all the best with your build too.

Hello Chill Frosty, welcome to my channel. You might want to go through this vid kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html please take the time as there are important points which I have highlighted. Do pardon me as many have asked the similar question so I did that for most to follow. Thank you.

@@KleoYan thank you

@@chillxfrosty no problem. Now I might not response to you fast. You can always email me at godzylatech@gmail.com and I will try to aid you out.

I had the same issue, the connection tion where it meets the fans needs to be turned around, slide the connection back out, rotate it 180 degrees and reconnect, then take the top cover off and put the canle the direction you want.

@@scotthamshere6189 Hi, welcome to my channel and thank you for your feedback.

hi@virul_ftw1398, welcome to my channel and you might want to watch this to have a proper understanding. you can skip according to timestamp too. kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html

@@KleoYan Thank you! I will give it a try

@@Virul_FTW ok. All the very best 😉

Hello iNZeL, welcome to my channel. Mirror end is where the air goes in and the logo side is where the air goes out.

Hi Nucl3ar, welcome back, if you are having the 3 pack set on both your SL-Infinity. this is how I will plug if you want to controll separately of the fan load and argb effects. 1) 3 x SL Inf fans to controller (example port 1) 2) 3 x SL Inf fans to controller (exmaple port 2) 3) plug the sata source from your psu to the sata cable which connects to the controller (this is where the power is supplied to both fan load and argb lightings) 4) as usual, plug the usb cable between the motherboard and the controller 5) plug only the PWM cable between the controller and your motherboard fan header 6) you do not need to plug the argb cable between then controller and your motherboard argb header. In L-Connect 3 app, under Fan / Pump dashboard, enable sync with motherboard (Then you will be able to control your fans rpm, using your motherboard utlity) As for the argb, use the L-Connect 3 app to control the effects you wanted.

@@KleoYan Perfect exactly how I thought it should work again I can't thank you enough for what you do for the community! Only sad thing I got 10 x 140mm LL Infinity's and didn't realize the Corsair 7000d case has a front fan cage/shroud that covers the side mirrors of the fans.

Hi David, welcome to my channel, the uni controller accpet a 7 pin connection from the fan which includes both PWM and ARGB cable. if you set bypass to motherboard, you lose control over the argb, unless you find a way to remove the fan connection from the 7 pin and to self crimp the fan cables to a 4pin pwm connector, then that's possible. even if you purchase the individual package, you can plug the fans directly to your commander core XT but you can't plug the argb connect to the uni controller as it's using a 3pin JST03 connector.

@@KleoYan ah I see! great video great content Thank you

@@David-nm4bx you are most welcome, all the very best with your build too.

Hello Antonio Arango, if you are talking about argb, so long your uni inf fans are plug to the control unit from the controll unit to your NZXT controller, it's fine.

hello Why so serious, welcome to my channel. Subjective on this, you see for me the front is drawing or pulling air in and for the back is pushing the air in. Example, a vehicle front is where you pull to move the vehicle (At neutral gearl) and push at the back. you can argue as in the other way round, where by the front (which i mentioned) is exhuasting air which in your way is the back and back (which i mentioned) is pushing air in which your way is the font.

Hello Contaminated, welcome to my channel. you are absolutely correct by doing so, as the argb load of these fans are high but it's safe to connect the way you did. that's really good. once again thank you for your visit and to share your method on connecting these fans directly to your motherboard. 👍

Hi Vincent welcome to my channel and yup they are beautiful. 😬

Hello anooymous84, welcome to my channel, you can dont use the controller and replace the SL120 V2 fans to your EK Elite, plug the fans as per normal to the uni controller and use L-Connect 3 application to control both Fans RPM and ARGB. as for the EK pump, plug it to the motherboard pump header and for the argb 3pin connector, you can plug to your motherboard argb 3pin 5v argb header, use your mothernoard argb software to control the argb effects of your EK pump.

@@KleoYan thanks for the quick reply! all ur videos are really infomative!

@@anooymous84 you are most welcome and all the best with your build 😉

Hi joey nigri, welcome to my channel, when you say it does not work, as I am unsure the steps you did. maybe watch this and it might fix your issue. kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html

@@KleoYan i'll try to make a video explaining my issue , thank you again for helping . I try to reach to lian li but they ask me question like did you plug it to your usb or something else . It's not a lot of help sadly..

@@joeynigri6207 ok, I will try to help you out. no promises but kindly send your video url to my email, godzylatech@gmail.com . reason is.. if you place any url in comments. your comments will automatically remove by KZfaq.

Hello lililiililil, welcome to my channel. if you are referring to use old controllers like the SL and AL in L-Connect 3 yes. but if you are referring to using the SL Inifinity fans to older controller like SL or AL, no you can't.

Hi Miguel, welcome to my channel, this migth aid you. kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html

@@KleoYan the video didn’t help with what I needed but I definitely appreciate you replying to my question, I actually just unplugged everything and plugged everything back the same way I did it and the L connect software started working again with the fans lol weird. I couldn’t find anything on the problem I was having so I just reconnected everything and it finally worked. Thanks again

@@miguelp619 Oh ok.. at least you got your set working, that''s good

Hi Atanas Beinov, welcome to my channel, yes you will be able to after you've installed the L-Connect 3app, reason that you can't do it at UEFI / Bios, your fans are connected to the uni controller. you will need the L-Connect 3 app to set to sync with motherboard mode, if not you are not able to controller the RPM via your motherboard Bios/UEFI.

@@KleoYan Thanks

@@atanasbeinov1109 you are most welcome, all the best with your build too.😉

Hi Prophet_4u2, welcome to my channel. For this, its not possible on L-Connect 3 app.

@@KleoYanthanks for the answer. This is truly a shame… I have been using the iCue Software and Corsair fans and was considering trying the Lian Li fans but this just „turned me off“ :-(. However, I believe using the L-connect for speed profiles and e.g. Aura Sync should work. Toggle on/off MB lightning sync under Quick/Sync Lightning. Is this assumption correct?

@@Prophet_4u2 yup correct. you can always use by pass mode on L-Connect App to use other ARGB application to control the effects, but the patterns are limited in a way, you can't control individual argb the way you might want it.

HI LJR, welcome to my channel, let me try to answer most of your questions. Q1) when you use the 7-pin splitter to add a back fan to the channel as three others, does the controller recognize it as a 4th fan, or is it basically treated as a "duplicate" (e.g. for something like Runway Sync)? If the former, that's a huge win. If the latter, it's a missed opportunity. A1) nope it will recognizes your rear fan as individual. therefore it breaks the rgb flow. Q2) have you tested out any software to control the fans, either with the controller or from the ARGB header directly (like signalRGB or OpenRGB)? If so, do you have a recommendation on ones that work? I have not tested with other application but I heard they are good. You can give it a try, and if you are connecting it directly to your motherboard, do make sure to check the ampere specification of your motherboard and to do the calculations on how many fans can you daisy chain. 3) how many LEDs total on each fan? Based on the Media Kit provided by Lian Li for my open view. Each SL Infinity 120 features a total of 40 fully addressable LEDs for maximum brightness. Kindly note that if you get an individual pack, it has the cable for connecting it directly to your motherboard argb and fan header. I have spoken of it in this video. Hope all these answer to your questions and all the best with your build.

Hello Davinia Robbins, welcome to my channel. You are absolutely right. infact I highlighted this out as some will just go without knowing. In the past, there are reviewers who show stuns that daisy chain more than 4 fans to a port which I've witness some of those whom I've help, they did the same. well that's in the past. As for now, with the newly designed controller, you can bridge up to 3 sets of 3 fans to a port.

@@KleoYan I think you only need to really connect to a sys fan header if you want the motherboard to monitor the speeds of the fans if using the controller. And to a USB header if using the software that you can download for the controller to control the speeds of the fans. I think it will all run fine without connecting to any motherboard header it will just operate in default settings and speeds.

@@daviniarobbins9298 thank you for your info. Am not sure are you addressing your feedback to me or to viewers. If it’s for me, I do know how these things works. Lian Li UNI Fans SL120 - Dos and Dont's (Part II) [L-Connect] kzfaq.info/get/bejne/h7d4fbiC27HbnI0.html . this older content which I shared with you are of older controllers. The newer controllers allows bridging of 2 sets of 3 fans together to the controller to a port, but still max fans to use are 16 to this controller. As what you have mentioned just to use the pwm connector between the controller to either motherboard fan header. Yes the load is not in the motherboard is on the controller, unless connect directly to the motherboard fan header and use by plugging the pwm you can set by pass to use the motherboard utility or even in UEFI/Bios to control the fans rpm. Alternatively, no need to plug. Just use the controller with the usb plug in.

@@KleoYan No, it is mostly for others who watch your videos. I would not teach you how to suck eggs. I been building my own PCs for the last 25-ish years though I haven't bothered yet with RGB lighting. Then again my current computer is ten years old. I really need to update it but I haven't got the best part of £1500. By the time I will be able to get all the parts together 14th and 15th intel gen will be out. I have a passing interest in computers and keep up to date with all the new developments even though I haven't upgraded in 10 years. Flipping heck some of the parts in my old computer are over 15 years old.

@@daviniarobbins9298 oh my bad. Got you. Sorry for being blunt. Do pardon me. All good. But personally argb is not really my cup of tea. Part of the reason I started this is mainly because, younger pc builders will just keep adding and adding argbs without knowing the limits. Anyway all good. Sorry again for being rude to you.

Hello Boogie Mane. welcome back, I dont think you can as you can't plug the pump header to the SL-Infinity controller. even if you have the SL or AL controller, I would advise you to plug your pump header to it. what if the controller mulfunction? your pump will stop to work.

Hello swift, welcome to my channel. If you are only using the L-Connect 3 app to control both fan rpm and argb effects, you don’t need to. Just plug the usb cable between the uni controller and to your motherboard usb 2.0 header will do.

@@KleoYan thank you, I plan on running 10 of these fans. x3 on the top, x3 on the bottom, & x4 on the side of my case. Will one controller be enough to power all of them?

@@swifted yes it’s enough. The uni contoller each port is up to max 4 fans.

Hi Dennis V B, welcome to my channel. I have pin up a troubleshooting guide which you might want to follow. anyway i will list it for you, also at the meantime before you troubleshoot, you might want to fully understand how L-Connect 3 works kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html I do understand it's frustrating but once you get it right, you will be enjoying using L-Connect 3. Basic Troubleshooting steps Disclaimer : Though the chances are very low to brick firmware updates on motherboard and to any controllers. I will not be responsible if you have brick your motherboard or controller. 1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version. 2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html 3) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller kzfaq.info/get/bejne/q7OXiLyaxtHUqIE.html 4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second 5) While waiting, please do not use KVM switches. Disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard. If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead. 6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller. 7) Plug the power cable and turn on your PC 8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller. 9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16) 10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON. 11) Reboot your system. 12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed. 13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16) 14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again. 15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses) 16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.

hello Refinald Brown, welcome to my channel. if you intend to control the two uni controller, you will need two USB port on your motherboard. if not you will need to get a internal usb hub. Also if you intend to control your fans via the motherboard argb and pwm (rpm) you can too but with different header on your motherboard. as in argb and fan header.

@@KleoYan I do plan on getting an internal usb hub and will also most likely be controlling the fans with the lconnect software. Do you still think I will be able to manage 18 fans after doing that though?

@@reginaldbrown7879 yes you will be able to as the power source is from your psu to you uni controller and then to those fans. It’s more than enough to supply those fans. Just make sure the usb internal is powered by a sata cable an not just a usb splitter. All the best with your build 😉

Hello Eduardo Bologna. If your controller does not have the sync 2 and sync 4 port. That is the older version which are the SL120.

Hi lain, welcome to my channel. If it’s of the standard version of the SL Inf, the face where is shows the mirror effect is drawing air in (example the mirror effect is facing you. The air will not blow to your face) Now if it’s of the reverse version. It will be pulling air in. Which the air will blow to your face.

@@KleoYan Do I need the lian li controller to connect and control the fan or can I connect it directly to the board without needing that controller?

@@lain1178 you can do either both. For controller you need to get a triple back. For direct connection to the motherboard, you will need to get the single pack. Reason for this the cable in the single pack will allow you to do so but for triple pack, you can’t do direct connection to your motherboard fan headers nor the ARGB 3pin 5volt headers

@@KleoYan I want to put 3 fans but separately, one in the rear, and the other two on the right side of the motherboard. Even with that distribution, I can't connect them directly to the board or to some universal fan hub?

@@lain1178 why not? You can get 3 x individual pack. Daisy chain 2 fans. Where the end goes to your motherboard 1. Your fan header and 2. ARGB header , then your rear fan again plug to your motherboard another fan header and another ARGB header.

Welcome to my channel Alex Wong, yup it will be nice to have the SL Inifinty 140. I believe there will be in near future. Once again thank you to have visit my channel and to leave your valuable feedback.

Hi redady, welcome to my channel. Let me see what I can find out about your controller and allow me to get back to you later. I am off to bed as it’s my bed time 12:30am here. Will talk to you later. Once again thank you to have visit.

@@KleoYan thank you for your quick response. kzfaq.info/get/bejne/kKqcgLyo2r2-c5c.html shop.aquacomputer.de/product_info.php?products_id=3832 there is also the Farbwerk 360 controller, it is good but it does not manage the speed of the fans.. it is made for A-RGB.. shop.aquacomputer.de/product_info.php?products_id=3798

@@redady4855 Thanks for the info, I have gone through your controllers. those controllers be it fan or argb, you can't daisy chain, even if you find a converter ( you can get this converters and select green www.ebay.com/itm/255209413090 ) . I don't think is a good idea to use AL on your controllers with them daisy chain. If you want to take the risk then go ahead. cos the load is at 8A and I am unsure how this 8A is distributed to each port.

Hi Rodnie Torres, welcome to my channel. They are of different entities. If you plug to the controller. It has power supplied via the psu sata cable to the controller, even if you plus to your motherboard fan header. Unless you are getting individual pack, then you will need to take note of your motherboard ampere. For fan load on the motherboard fan header. Stick to max 3 fans per fan header. As for argb so long is max at 4 fans.

@@KleoYan ok thanks a lot. I was really confused on this but I understand now. I love your videos they are very informative.

@@rodnietorres3082 you are most welcome. Glad you enjoyed the content and all the best with your build too.

Hi Sebastian Alejandro, welcome to my channel. by default, it's not possible even if you get a single pack where you have the 4pin PWM cables as your argb, you will need a coverter to plug to the inf controller / hub (which is 7 pin connector). It will only be possible if you mod your cables.

Hi Day if peace, welcome to my change and yes, it’s all good of what you’ve mentioned. All the best with your build 😉

@@KleoYan thank you so much your Channel Is so helpful .

@@whatthefact2423 you are most welcome and just incase if you are having issues on installing the L-Connect 3 application, this might help you out kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html

Hi Tz2001, welcome to my channel as these uni fan heavily depends on their uni controller, you can't just switch and uninstall the L-Connect 3 app. so sorry about this.

Hi BrutalDabs, welcome to my channel. that will be awesome if they do. I suggest if you can raise your suggestion at Lian Li Reddit at www.reddit.com/r/lianli/ . Thank you to have visit and to leave your feedback.

Hi Varo Go, welcome to my channel. Both AL and infinity is almost identical. But I choose the AL V2 for the infinity. It look sleek on the ARGB effects. Not overdose over the infinity.

@@KleoYan Thank you very much for the answer, Kleo. In terms of noise and performance, are they similar?

@@Varowo If you are using these fans as case fans. both noise are almost identical. If you use it on AIOs then the ALV2 will be abit louder. This is due to the ALV2 are 28mm thick as compared to the SL Inf with is at 25mm thick.

@KleoYan yeah, ill go full sl-inf/al v2 build hehe. It's helped me a lot. Thank you!

@@Varowo you are most welcome and all the best with your build.

Hello Carlos Bermudez Diaz, welcome to my channel. the choice is yours, you can either bypass L-Connect 3 and make use of your motherboard fan controller to control the fan speed or to use L-Connect 3 to control the fan speed. I personally will use motherboard PWM to control radiator fans and the rest, I will just use L-Connect 3 to controll the rpm of the fans.

@@KleoYan what I did was to connect the 3 radiator fans (TOP) to the cpu fan header and the rest 7 to the hub and from the hub to sys fan 2, everything is OK instead my pc is shutting down when I play fornite for some reason, after I reset there's no issue

@@ValtrX Hi, welcome back, what about if you play other games, does that do the same too? I would advise you to monitor the CPU temperature while playing fornite. I doubt are the fans that is causing the problem. It might be driver issue, it might be physical hardware issue. maybe can you list down your system specs and OS used in your system. thank you!

Hello Kevin Lim, welcome to my channel, you can do with a converter and to plug your strimer V1 controller to the Sync 2 or 4 in the SL inf controller. but you wont be able to make use of the strimer plus effects from the L-Connect 3. if you want that, you should get the Strimer plus controller v2.

Just built my PC and I tried using a converter from Strimer V1 to Sync2/4 in the SL Inf Uni. Just to share the result incase some will also have the same question, there were 2 LEDs in the 8pin(gpu side) that is just randomly flickering. Didn't made time to fix lol. Much better to use the L Connect 3 controller to avoid hassle.

@@kevinlim3891 Hi, thank you for the feedback. hmm.. yup it's better to have the V2 controller, at least you get to use the full argb function..

Hello Adrian Guiao, welcome to my channel. Yes you will be able to connect all to the controller as the 3 pack set should have four cables that has a 7pin plug. Therefore each cable you can daisy chained up to 4 fans and to be plug to port 1 2 3 and 4.

@@KleoYan thank you for the reply brother. So the 3 pack comes with extra 7 pins

@@dopeboiiage yes, the three pack have total of 4 7pin cables which you can daisy chain four fans to 1 cable. so that is total of 12 fans to your controller which are to be plug to port 1 to 4. no issue.

Hi [SHIRO-NEKO]TM, welcome to my channel. on the word custom, double click on it. you can rename custom to your desire profile name.

@@KleoYan Thanks Yan, and Do you know anyway to add more anchor points for fan speed curve ?

@@noi747 the anchor points are fix. You can’t add more.

@@KleoYan ❤️

@@noi747 you are most welcome and all the best with your configuration.

Hello Evil Bane, welcome to my channel, after viewing your MSI Meg S360, it has a LCD display on it. you cannot plug that to the SL120 infinity uni contoller. you will need to connected them seperately. SL120 Inifinity contoller to one of the usb motherboard header and the MSI S360 to another usb motherboard header.. Then you will need to make use to two different argb apps. L-Connect 3 for the SL120 Inifinity fan and for your MSI Meg S360 with it's own arb application.

@@KleoYan Thanks much!!!

@@puddleduckist you are most welcome and pardon me for the late reply. All the best with your build.

Hello Tony Tran, welcome to my channel. If you are using the SL inf 120 single Pack, you don’t have to get the lian li argb kit. You can plug to sync 2 or 4 without issues.

@@KleoYan Strange. I was reading online that the ARGB cable that the single pack comes with won't plug into the sync 2 and sync 4 so you need the ARGB kit to convert it. Lian Li also just confirmed this as well.

@@bigdoublet Hi Pardon me.. my bad. I got mixed up. yes you will need the argb kit.. so sorry.

Hi Rafael A Rodriguez Estronza, welcome to my channel. I have no idea the actual name for it as you can't get this cable individually. It comes with the 3 fan pack set.

But I ask for the RGB Splitter. That one not come with the fans.

Hello J J, those are for you to tape at both sides of the fans to protect from scratches.

Hello Iron Condor Simulations, if you purchase a single unit. The cable that comes with it, allows you to connect directly to the motherboard. Both fans and argb, but for the argb, you can only use the motherboard argb utility. If you want to use the L-Connect 3 app. The Inf Uni controller is needed and this unit is only when you purchase a 3set pack.

@@KleoYan thanks! Will the single fan purchase be able to connect to the L Connect 4 controller that is included with the three pack? I see the cable for the single pack only has ARGB and power.

@@IronCondorSimulations if you did purchase the 3set pack that comes with the controller, there are 4 cables that has 7pin connector. You won’t be using all four, you will be daisy chaining the fans and to use only 1 cable. You left with 3 cables. So if you purchased individual pack. You can forgo the cable that comes with it. Instead use one of the cables from the 3set pack, then you can connect your single pack fan to the inf uni controller, then you can make use of the L-Connect to controller the argb effects. I hope I am not confusing you.

hello Azmalguthek, welcome to my channel. It really depends on you. for me if total of 6.and to save cost, I will go for a 3 pack and 3 x individual pack. If have dont really have restriction on budget, then get a 2 x 3pack, reason being, it will be good as you have two controller. Incase one is down, you have another while you can sent the faulty unit for RMA with Lian Li, the choice is yours.

@@KleoYan Thank you. I will order the two x three pack in order to have a spare controller, as I am not overly worried about saving the $10. Liked and subscribed!

@@azmalguthek4502 you are most welcome and thank you to have subscribe and all the best with your build.

Hello Math, welcome to my channel. It greatly depends on you. Both will work, the only difference is, with a 3 pack set, you have the controller which make use of L-Connect 3 app. If individual, you will need to hook those fans to your motherboard and to control by your motherboard argb app.

hi, welcome back, if it's strimer plus v1, yes you can.. but for strimer plus V2, you can too but it defeat the purpose as the L-Connect 3 app has more argb effects to play with, thats why the Strimer Plus V2 has a new controller that enable you to plug the USB cable between the controller to your motherboard. example here of the Strimer Plus V2 kzfaq.info/get/bejne/q71-jbJjrbzLqHk.html

Hi Gumme LE Grand, welcome to my channel. you need not have to worry about the power to your fans. just make sure that 1) all sata source are plug to your uni controller 2) do not exceed more than 4 fans to each port. (Port 1, 2, 3 and 4, max fan is up to 4). you will be fine and if you intend to use L-Connect 3 to control the argb effects, you dont need to plug the argb cable from the uni controller to your motherboard argb header, unless you want to use your motherboard argb effect. same apply to the PWM cable.

@@KleoYanthank you for responding this fast, so if i get it right i just have to make sure the sata cable and usb are connected to the motherboard and i'm good to go? (if i want to use the controller for the arg)

@@GummeLeGrand hi, you are most welcome. What I meant is. Make sure the uni controller is powered by the sata cable. Maybe watch this and take note of what I have mentioned in this video kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html

@@KleoYan i watched the video, thank you for your help, it was very clear

@@GummeLeGrand you are most welcome. all the best with your build too! 😊

Hello Paul, welcome to my channel. I believed there are feedback given to Lian Li and they should be working on it.

Hi Chuck Norris, welcome to my channel. If you have gotten all 13 SL Inifinity fans without the SL Infinity uni controller which are included in a 3 pack set. It will be an issue where you are not able to use the L-Connect 3 app. As for the fan hub you are refering to, I am not sure which hub you've gotten and I have no clue if there is a separate SL Infinity uni controller sold out there, plus if there is a separate unit, I have no idea what's provided in this unit. Let me know which fan hub did you get, if not I am not able to suggest or to help you with. thank you!

@@KleoYan Found that aliexpress has uni hub seperately sold woth all cables that comes with 3x pack but I tried to bypass that and find an aftermarket hub which is razer argb hub. Reason behind this is signalrgb program which allows custom effects and a lot of customization but lian li firmware is really messy so its not supported. Also it offers lower cpu usage and multiple devices sync

@@ChuckNorris-ei2mk Hi, let me have sometime to answer you as currently busy. sorry to keep you waiting.

hello lolo lolaso, welcome to my channel and thank you for the feedback. unfortunately no, as each uni fan argb effect paterns depend on their individual controller which I've explained here. kzfaq.info/get/bejne/ec2mqLh3yszKaIk.html. Once again thank you to have visit and to leave your valuable feedback. All the best with your build.

Hello KDF Teddy, welcome to my channel. Yup you can do that as in to have one controller in a 3 Pack and the rest to get individual. For some, just incase, they might get 2 set of 3packs, just to have an additional controller, just incase if 1 is faulty, there is a spare.

Thanks for the Idea you earned my sub! I'll buy 2 (3packs) and the rest is individually

@@kdfteddy2677 you are most welcome and all the best with your build.

Hi Nader-sama, welcome to my channel. I will just use only the L-Connect 3 app from Lian Li if you are using these uni fans.

Hello Crapu, welcome to my channel. Yes you can do that, no issue. Max fans for one port of the uni controller is up to 4 fans. Also you only need to plug the 2 sata power source from your psu to the uni controller and the usb cable between the motherboard to the uni controller.

@@KleoYan thank u so much for the response i will definetly watch ur vids they are realy helpfull

@@davidd_009 you are most welcome and all the best with your uni fans too.

@@KleoYan thank u

@@davidd_009 most welcome 😉

Hi Faris, welcome to my channel. Just like to ask, which motherboard are you using and also on L-Connect 3 app. did you you enable to load at startup and to minimize it to system tray?

@@KleoYan I have x570s msi mpg and yes I did, its usually always enabled and hidden under system tray

@@faris9327 I see. did you happened to install MSI Dragon Center? maybe you can try uninstall both L-Connect 3 app and the MSI Dragon center first.. use revo unistaller to uninstall both application and to remove the registry and unwanted first. once that's done, reboot your system.. Intall only the L-Connect 3 app and do a simple setting to test it out first. if that stays then if you require MSI Dragon Center, install that.

@@KleoYan okay thanks alot! I currently dont have msi center, because its bloatware for me, but ill try uninstalling and reinstall

@@faris9327 ok dokie.. all the best 😉

Hi Giorgio Frosi, welcome to my channel. The side where you see the 4 frame sticking diagonally to the fan. This is where air is pushing else for the side without the 4 diagonal frame is pulling air.

@@KleoYan thank you for tips

@@gioski89 You are most welcome and all the best with your build too. 😉

Hi Lance Snead, welcome to my channel. If you are using the uni controller to plug your fans, you do not have to worry as the power drawn of your fans are from the controller. Unless you do not use the controller but to plug your fans directly to the motherboard. In your case, I believe you are using the controller which draws power directly from your PSU and not from your motherboard fan header.

@@KleoYan That is correct, I'm using the controller. Makes sense now. Thank you!

@@lancegsnead you are most welcome and all the best with your build.

HI aiden_86, welcome to my channel, as for the SL Inf 140mm, this you might want to ask at lian li reddit www.reddit.com/r/lianli/ as I have no answer for you.

Hello NoOne, welcome to my channel. Yes you can but make sure the argb do not exceed 1.8a

@@KleoYan Thank you for the response. Is that 1.8a for each port or for both port? By the way, how do I compute for the total ampere of the led lights?

@@noone5014 hi do pardon me. Each port is at 2.5a as how to compute. You will need to see the specification of the argb strips or such. They will have specs on them.

HI Boogie Mane, welcome to my channel, yes you will. need to bypass, but you might face an issue with the argb settings or you can purchase individual pack where you can connect the fan header of these fans to your 3rd party controller but you again you will face argb issues where you dont have a controller to control the effect. unless you plug it to your motherboard argb and to use the motherboard argb to control the effect. please becareful if you do this. there is a limit on the ampere. if overloaded, your mobo argb header might melt or damage.

@@KleoYan What if I use an Aquaero 6LT for the pump, fan and argb control?

Or have LC3 control the argb

@@JunglistPrefection hi I am not sure if the load capacity of that controller. All I can fell u is that each uni fan is with a 0.65a to 0.67a on argb and 0.18a to 0.22a fan load. As for strimer plus v2 that’s about 1.35a to 1.65a or more, depending on dual 8 pin or triple 8pin. So sorry can’t answe ur question.

@@JunglistPrefection that’s the tricky part as the cables on a 3 pack set is of a 7 pin plug. Unless you know how to do crimping to separate the fan load (4pins) and argb load (3pin)

Hi serendipity, welcome back. Yes you can do that, so long they are of the same uni fan family. But I would advise only to mount the SL140 argb connector to your uni controller and leaving the fan load directly connected to the motherboard cpu_fan header. As your SL140 are for your radiator. Let your motherboard control the rpms. Another reason for this is, in the event if your uni controller is not functioning. Only the argbs are affected and not the fan rpm, so this will ensure that your SL140 is still spinning and keeping your processor cool. Please take note not to daisy more than 4 SL fans to one output of the uni controller. This is to prevent overload.

@@KleoYan thanks for the advice! So you are saying, even if I may not connect infinity fans directly to the uni controller, I still can customize their lighting effects through l-connect, right? Or would it be more convenient to get extra controller connected to infinity fans so that their lighting and functioning are separate from those of regular 140 unis/radiator fans?

@@serendipity2656 huh I thought u are talking about the original SL120 and SL140? Anyway both SL120 / SL140 and the SL 120 infinity will need their uni controllers. Else L-Connect 3 application will not work.

@@KleoYan I was talking "SL infinity 120" as case fans & "original SL 140" as radiator fans (since theres no 140 infinity fan haha) So even if radiator fans and case fans may be different in model, both can still coexist on a same PC and be customized with lighting on their own, so long as they are connected to separate controllers, right?

@@serendipity2656 oh.. ok my bad.. if thats the case. you can still make use of the sync 2 or sync 4 port of the SL Infinity controller for the SL140 fans.. only thing you need to take note is that.. SL140 cannot be individually controlled.. it will follow either port 2 or port 4 respectively.. you can find details at lian li website lian-li.com/product/uni-fan-sl-infinity/ look under SIMPLE CONNECTION WITH CONTROLLER where it says SM TYPE PORT Compatible with the Galahad AIO pump ARGB cable…etc. Each port supports a 5W maximum output. SYNC 4 port syncs to the lighting effect of port 4 and SYNC 2 port syncs to the lighting effect of port 2

Hi David Teo, welcome back. Pardon me, I don’t understand your first question, mind to elaborate more? The plastic protector is meant to stick on both sides of the fan where the mirror effect is. It’s to prevent scratches. Sorry that I miss out on that.

@@KleoYan In the individual SL INF fan package, the fan connector/cable was similar to SL and AL series (with separate PWM and ARBG connectors). I am asking if this fan connector/cable also be use for a cluster of SL infinity fans instead of the new 7 pin cable?

@@en0n Oh. The individual pack even if u cluster 3 to on, that cable you can’t use it on the uni controller.

Hello derrick cheng, welcome back. You can do either.

@@KleoYan hi kleo, apologies for the late reply, missed your message notifications, thanks a lot for ur advice, appreciate it!

@@derrickcheng2834 you are most welcome.. all the best with your build.