HOW TO CONNECT LINE OUTPUT CONVERTER TO FACTORY SUBS!

Рет қаралды 10,104

4 ай бұрын

In this video I connect a line output converter to my factory sub to connect an aftermarket amplifier and subs. 2006 Acura tl. Factory headunit.
#lineoutputconverter #acuratl #afternarketsubs #aftermarketamp
#loc2sl
Wiring kit, loc, and amp all bought at wall mart

Пікірлер: 26

@catchmp82 4 ай бұрын

Nice build. For the line out. I would advise putting the positive wire to the remote 12volt(blue wire). It will help from draining your battery because it comes on from the radio 12v. That’s how I’d wire it. Be safe and keep up the good content!

@CameronSafack 4 ай бұрын

Thank you for the input bro definitely will do!

@ChrisG-ph7yf 4 ай бұрын

What are you saying? It sounds like you're saying that he should hook the remote wire into the constant power supply for the amp. That would keep the amp on all the time. In this setup, the best thing to do is pull the radio and locate either the factory sub amp turn on wire, or find the radio ignition wire. This is best because if the car had RAP (retained accessory power), you won't lose the sub amp when you turn off the car. If you don't have that, or don't want to pull the radio, the next best option would be to tap into the accessory circuit at the ignition. I never liked using audio detection to power the remote.

@kadynplayzs 4 ай бұрын

yo bro keep uploading and grinding your content is great and will blow up on yt one day trust

@CameronSafack 4 ай бұрын

Nah that’s love g! I appreciate it a lot and will do

@Nvthvn23 4 ай бұрын

Thanks for sharing! Needing to get an LOC now, have been looking for something like this since I got a truck with Sony package last August. Hopefully can pop the P3 back in soon

@CameronSafack 4 ай бұрын

YESSUH! I’m glad I could help you out g!!

@MrLandslide84 4 ай бұрын

This is awesome! I think this will work in my Buick that has a factory amp.

@CameronSafack 4 ай бұрын

Perfect!

@mark4632 4 ай бұрын

Acura tl is sick

@CameronSafack 4 ай бұрын

I appreciate that g!

@tillytuott9221 4 ай бұрын

Nice!

@CameronSafack 4 ай бұрын

THANK YOU

@mr1noticeable 4 күн бұрын

So the remote and ground doesn’t go from the converter to the ground with the amp, but from the converter to the amp ?

@CameronSafack 19 сағат бұрын

Yeah the ground wire that is going into the amp from the converter not directly to the ground location, and the remote from the converter is going to the remote spot on the amp.

@ChrisG-ph7yf 4 ай бұрын

You should install an in line fuse in the LOC power line. The fuse on the amp power wire (I really hope that was installed) is way too big for the LOC power wire to pop with a dead short. A dead short on that wire will turn it into a lightbulb fast.

@CameronSafack 4 ай бұрын

Okay thanks man will look into it.

@ChrisG-ph7yf 4 ай бұрын

I would use a 5 amp fuse @@CameronSafack