No video
How To Connect the LaserCube WiFi
Рет қаралды 2,927
Күн бұрынThere are four ways to use the Lasercube Wifi:
Wifi Server
Wifi Client
LAN Server
LAN Client
In this video we show you how to use each mode. The two Wifi modes are wireless and require the antenna to be attached. The LAN modes are wired connections to your network and do not need the antenna to function.
Don't forget to turn the Network setting in LaserOS On for the Lasercube to connect correctly.
If you have any questions, feel free to reach out.
Stay connected with us!
Facebook / xlaserstudio
Instagram / xlaserusa
Twitter / xlaser
TikTok www.tiktok.com...
Music:
Grand Lake by Approaching Nirvana
@ngccharle3317 2 жыл бұрын
I was thinking to use this cub as growing light for plants . I just have question can that laser cube draw line in X axis and Y axis very quickly so the laser point can draw a filled square of light i mean a square which inside a square is light . So when the laser point moves in x axis and same time in y axis it can draw a full square of light . I do not mean hallow square . Is that cube fast enough to do that ?
@Xlaser 2 жыл бұрын
If I understand your question correctly, no it can not draw a filled-in square of light. You are correct that it is a single point moving extremely quickly, but unless the square or shape is very small, it will not be able to do that. Also, laser light is not a substitute for natural daylight. Hope this helped
@MP12481 10 ай бұрын
What’s the password for Lasercube Wi-Fi?
@Xlaser 10 ай бұрын
Hi, the password should be Laser2020 (and can be found in the manual on page 11)
Law Chakra
Рет қаралды 2,2 МЛН