How To Create A GREAT Tone!

How To Create A GREAT Tone! | Quad Cortex

Рет қаралды 3,261

2 ай бұрын

#neuraldsp #quadcortex #neuralquadcortex
Line 6 Marketplace Presets: bit.ly/line6marketplace-sadites
Helix Ultimate Complete Presets Vol. 1-7: bit.ly/3xuAD30 (NEW)
Helix Ultimate Complete Presets Vol. 1-6: bit.ly/3IRjVwz
Tonex Tone Models: bit.ly/tonexpresets
Tonex ToneNet Tone Models: bit.ly/3JosdwY
Quad Cortex Presets & Captures: bit.ly/4dFDG92
Kemper Rigs/Profiles: bit.ly/3shWRTe
IK Multimedia Affiliate Links:
Tonex One Pedal: bit.ly/4b2x1n4
Tonex Pedal: bit.ly/40XKEj7
IK Multimedia Amplitube 5: bit.ly/3y02IfR
IK Multimedia Tonex: bit.ly/3Srb0pc
Join this channel to get access to perks:
kzfaq.info/love/vhdK4-QIzo76Y_RIbxZctgjoin
After posting my first introduction to the Quad Cortex video, I had a lot of requests for more videos showing how I would go about creating presets and tones using the QC. In this video I take an in depth look at my approach to using it and also have a free template up on Cortex Cloud for those who want to experiment with it. You can follow me there at: jsadites . I also have all my available presets and Neural Captures available at my website at the link below. I really hope you enjoy the video and the presets.
Quad Cortex Presets & Captures: bit.ly/4dFDG92
Quad Cortex - Boo-Dah DC Ultimate Preset and Captures: bit.ly/44J63Py
Quad Cortex - Brit Plex Ultimate Preset: bit.ly/3wtat07
As always, thanks so much for watching...
Please visit my sponsors:
Line 6: www.line6.com
Vigier Guitars: www.vigierguitars.com
Toontrack: www.toontrack.com
Mission Engineering: www.missionengineering.com
Morningstar FX: www.morningstarfx.com
Temple Audio: www.templeaudio.com
0:00 - Introduction
1:36 - Cortex Cloud
2:04 - Cortex Control
3:04 - Compression
5:29 - Low and High Cut
6:25 - Reverb
7:20 - Delay
9:40 - Low and High Shelf EQ
13:14 - Amp and Cab
15:02 - Before and After
16:19 - Neural Captures
17:44 - Conclusion
18:55 - Quad Cortex - Brit Plex Ultimate Preset In The Mix

Пікірлер: 25

@stephenmestrada 2 ай бұрын

Make a video about effects loops and setting the levels properly and where in the chain it should go! Btw great video! Thanks for sharing this freely with everyone.

@JimsMusicJourney 2 ай бұрын

Always appreciated your videos when I was a Helix user. Looking forward to more QC videos.

@JasonSadites 2 ай бұрын

Thank you and really glad you enjoy! Much more to come 🙂

@shibatabread Ай бұрын

I got a QC a few days before a gig and didn’t have much time to learn how to use it but this preset helped carry me through the whole gig! I barely tweaked with any of the settings but got tons of compliments on my tone. Thanks for making such a helpful vid!

@JasonSadites Ай бұрын

That is amazing news and so glad it was helpful and worked so well for you 😊

@isaacwilliams153 2 ай бұрын

YESSSSS I Freaking loved your helix videos. Haven’t watched in a while, cause I sold my helix for a QC. Glad to be back!

@shellsjoint 2 ай бұрын

Jason, I’m your biggest fan!! This is such a great video and it really explains a lot of stuff for us. Thank you. I love my QC!! It’s the new Helix! lol..

@JasonSadites 2 ай бұрын

Hey Sheldon, thanks so much for the kind words and really glad you enjoyed :-) Hope you and the family are doing well!

@petereverett4286 Ай бұрын

Thanks Jason. I’m new to QC and was recommended to you my a fellow QC user and the template is going to be super helpful as a jump off point. Great and clear presentation style and now about to watch your other vids. Thanks again from the UK.

@JasonSadites Ай бұрын

My pleasure and glad you enjoyed :-) Hope the videos are helpful!

@user-df4gg1yx6f Ай бұрын

Hi Jason, thanks for another great video! I'd love to get your take on handling presets with more complex routing. For example, I use my QC alongside a Powerstage 200 on a pedalboard to feed my 2x12, but I also run XLR outs with a cab block to front of house for monitors/PA mix. I'm curious to see how you might handle something like that! (I'm also interested in how you might gain-stage within such a preset to avoid clipping the power amp while keeping as loud/clear a signal as possible for FOH.) Hopefully this is something you'd be interested in exploring. 😁

@AndyDacoulis 2 ай бұрын

Great tips here! Thank you!

@JasonSadites 2 ай бұрын

Thanks so much Andy :-)

@JenniferBatten1 2 ай бұрын

Thanks!

@JasonSadites 2 ай бұрын

Thank you so much Jennifer :-) I hope touring is going well!!

@umidkwattoput 2 ай бұрын

Can't wait for your high gain model amps on the QC! I enjoyed the PV model preset you had for the helix!

@JasonSadites 2 ай бұрын

Definitely looking forward to digging into some of those 🤘 Glad you enjoyed the PV tones for Helix 🙂

@peteglase 2 ай бұрын

9:03 - this also demonstrates how the comp at the end helps bring out the "rolled off" volume (at the guitar) without the big drop off in the overall mix.

@connorbouta9402 2 ай бұрын

Can you make a video about the I/O menu and using the QC with external effects. I’ve been trying to integrate my pedal board into my QC presets but I’ve noticed that I loose signal when the signal comes back in from the board. I’ve been trying to make my presets as loud as I can with out clipping but If I do that I have no headroom to do anything like boosting with any of my physical pedals.

@Fenderlin6 2 ай бұрын

I have a question, How can i raise the output without have it clipping? For example, my Helix and my Fractal FM3 i have my overall volume at 12 clock wise and that tje way i use it Live but for some reason my Quad to compensate the same volume i have to raise it almost 80%, can you help me with that

@vedder10 2 ай бұрын

I know this is not about the ToneX but I've noticed that tons of people have requested a tuner for the ToneX pedal. I may be extremely late to discovering this but if you hold down the "C" stomp switch you see that it has a very effective tuner built in.

@JasonSadites 2 ай бұрын

Yes that feature was added in a recent update :-)

@ax3l_d994 2 ай бұрын

Sorry bro to hijack this video with a tonex question, yuo said we should put the input trim at 0. Is it the same for humbuckers and single coils? Great videos, keep them coming

@JasonSadites 2 ай бұрын

No worries at all! I never change my input trim when changing guitars. My Tonex captures are designed to sound exactly as I captured them with Tonex Pedal input trim is set to -3.0 dB or on Tonex software with your recording interface instrument input set to 11 dBu of headroom. Hope that helps :-)