Thank you for confirming the sling loop! Very interesting to hear that the real one creaks as well! Pheas

So if i put the ones from browells they will creak? I don't really care, as i just want to put nice feeling ones on.

Plus that type of stock and butt plate are historically correct for the XM16E1 so not a lot of design choice there.

Thank you very much! Pheas

Hiya. Glad you enjoyed the video, if you are in the market for a new nam weapon they are worth the money. If people want the shot gun reviews I am more than happy to pick some up and unbox and review. Any particular ones you are interested in? Pheas

@@PheasAirsoft Oh lucky me :D :D well I had a few in my mind for budget shotgun I would say the EE M401. It is a magazine fed pump action single shot shotgun and you can get it with 3 mags under 13 Euro around 12 pounds . The other budget but quite good looking shotgun would be the EE (again) Tri-shot M56DL pump action boy Or the cyma 350 non metal version . Both of them shot shell, Tri-shot shotguns and both of them are under 50 Euro. There is also the ASG Franchi SAS 12 which is under 40 Euro (shotshell version). These ones might worth a lovely try :D . I hope to see one of these bad boys in the future :D . With some love from Hungary M. Zs. Keep up the lovely work mate !

@@mezeizsolt2147 some good choices on the shotguns there. I would to see a comparison review for the cyma .351 and double eagle m56b, both tri shots, similar builds, similar prices. See which one has the best range and accuracy.

@@PheasAirsoft is this a decent gun to start off with?

@@skullmarrowprozpekt6857 Hello! Its a LONG piece to start with, but it is a decent piece of kit all the same. It will perform well out of the box and be fairly reliable too! There is a lot worse you could have bought for similar or more money. Pheas

They seem to have become VERY hard to get hold of at the moment, Good luck with the search for it! Pheas

@@PheasAirsoft yes, everywhere seems to be sold out.

Hiya. If you have a mix of both types of batteries I would get a multipurpose charger like this one: www.componentshop.co.uk/giant-power-intelligent-balance-charger-g6ac-12-220v.html I've used this one before and it's great, really easy to use and will charge everything you could want for Airsoft. Hope that helps. Pheas

@@PheasAirsoft My lord you know a LOT on this subject!!!

Old but gold. Quite a gun! It's design was far ahead back when it first appeared, and still be somewhat futuristic today... More than half a Century after!!! All this means something!!

This is actually a pretty good representation of the XM16E1 which was the initial US Army version. Lessons learned from it led to the M16A1 with different butt stock with trap door, full fence lower receiver and birdcage flash hider being the most prominent changes.

Hiya, thanks for the suggestion. That's part of the plan as developing the channel. I just need a site or some land willing to let me set up a little range to test things out. Unfortunately people can be very unwilling to help when you tell them it's for realistic toy guns ha ha ha. Pheas

Hiya. If it's not feeding I can't see it being a battery causing it. A 7.4v defo wouldn't cause feeding issues. If the mags all work fine in other guns then you have a couple of options it could be... 1. Hop rubber is damaged / misaligned and that's stopping BBS feeding. 2. The hop unit is damaged / deformed - very unusual for this to happen. 3. The air nozzle and or tappet plate is damaged or not moving far enough back which could cause these sorts of issues. If you are getting some feeding them nothing I would most likely have thought the hop rubber is at fault. Id have to see pics of it to know for certain and videos too to determine properly. Pheas

@@PheasAirsoft thank you so much for reply mate, yeah I got it the other month, spend £300 ish on upgrades and I’ve had a lot of trouble with the feeding, I got some double bell Vietnam mid caps and they feed okay then stop, tried tape on the top rear of the mag and it fit snug with no front or back movement while in the mag well, but it worked for a bit then stopped, even the mag it came with doesnt work 90% of the time, just super frustrating to spend half a grand on a gun and it doesn’t even work!! I’m not sure what to do with it, I might ring when they’re open to see if the tech can have a look at it again because there’s clearly an issue

@@wolowizard4441 if they did the upgrades then defo get then to sort it. One last thing I would check first is see if someone nearby (friend etc) has another other mags to try to see if that helps. Also out of interest from the mags... If they are fully loaded (and wound if higb caps) if you release the tab on top of the feeding tube do they all fly out? Or is it a slow trickle that's very very slow? If it's slow or not moving at all then it could be the mags after all. Also might be out of left field... My mate had a feeding issue with an older cyma... We tried everything. In the end it was because he was using 0.32g BBS without realising 😂😂 and the springs in the mags just couldn't move them properly so cause misfeeding all over the place.. just incase you were using heavy ammo.

@@PheasAirsoft it could possibly be the mags, when I take out any of the mags, 4 bbs fall out of the gun so they’re exiting the mag but then piling up in there, I’ve turned the un upside down and still doesn’t fire after that! They fly out when I manually empty the mag! I did also look and the little tab that holds the bbs in until the mag is inserted is slightly smaller on the double bell Vietnam mags so I did think that perhaps the hop up unit wasn’t pulling that back filly when the mag was inserted but the mag the gun came with is also not feeding! Ahhh okay, I’m using .28 but the guy said not to use anything lighter than .3 because if something he did with the gun but I used .3 and they still didn’t feed but I wonder if it’s because I need to use heavier, no idea - I’ll just have to call and see about it being sent back! Thanks for you help mate

Hello, it should do yes! Pheas

ME TOO!! an SA58 (like the JG one) but with more options for stocks etc would be outstanding!

Hello! What weight of bb do you use in it? I usually run 0,.25g bbs and find it needs no where near the full amount of hop on to give it a good flight. You could look at swapping out the hop rubber to be one with more adjustment earlier (like the Maple Leaf MR rubber with Omega tensioner) Hope that helps. Pheas

@@PheasAirsoft I use 0.25, but I close the hop up to the maximum to get to 50 meters ... it starts working at 3/4 of a turn as if there was a vacuum, I thought it was defective but I have also read about other people with my same problem, so it makes me think that the rifle comes out of the factory just like that. You're the first one for now to tell me it works well for him. I will change the hop up later, for the moment I use it like this, since it reaches 50 meters safely.

Hello! Thats an amazing compliment for me that my video has influenced you to buy it! Blows my mind. The handguards can be a touch wobbly, I would take them out initially and check the ring at the back (infront of the magwell) is tightl, then maybe put a layer of duct tape into the recess to give it more friction, should tighten it up for you. Pheas

@@PheasAirsoft Thank you for a good quality video! I suppose for the price i can live with it! But theres actually not alot of videos on youtube where they shpw how to fix wobble in handguards, maybe it is a video for you to do! I looked at your dissasembly video aswell, and i think i know where the tape needs to be placed. Do you think the handguards will become looser with time or is it just the way they were made that makes it wobble slightly?

@@GeneralGiffel Glad the disassembly video could be helpful to you! I think they will stay at the wobblyness they are now, its down to sizing tolerances not being the best that creates the wobble. If I get one of them back in for anything I will be sure to do a video about the handguard and how to tighten it up. Pheas

Hello! It can use 11.1v lipos. I am aware that the first stocks of these didn't like 11.1v lipos as the MOSFET would burn out. Buy later stocks of them were ok and ran fine. Pheas

Hello! The 9.6v will depend on the charger output and the mah of the battery. if the battery is 1600 mah and the charger outputs 500mah then (From empty) the battery would be 1600 / 500 = 3 with 1 left over, so just over 3 hours to fully charge. Lipos use special chargers which tell you when they are full (always charge at max 1amp, otherwise they will shorten their useful lifespan to you) Pheas

@@PheasAirsoft Thank you!

Hiya, the range is a work in progress and hoping to have my own bit of land for a proper testing range before too long, but appreciate the feedback. The creek is a great place to play (plenty of hills!) But it's got a good set of regulars and the Marshalls are a great bunch. Really enjoyed myself! Pheas

The creek is excellent, very demanding getting up the hills if you're out of shape like me but thats not gonna stop me going back for more this month

Thanks guy's I'll check it out soon 👍

Hello! This version of the cyma and the JG... The CYma has the metal body and the mosfet and generally better quality control so things are a little better, the JG tend to have a polymer body (but check specifics with the retailer) and the parts tend to not quite be as good with quality control. The Cyma generally performas a little better and is a little better built inside than the JG. If I had the choice... Cyma, thats not to say the JG isnt good / worth the money, just the Cyma pips it. Pheas

Thank you ! Have a nice day

Hello! I can't find the exact one, but this is the newest / closest one to it.www.patrolbase.co.uk/nuprol-11-1v-2600mah-20c-nunchuck-lipo-battery Hope that helps! Pheas

did you also bought the gun in the same website?

@@remusio You can get the gun from this website, but I bought it from Taiwangun.com Pheas

Unfortunately not. You have to undo the screw to open it up, but with the massive capacity of the stock it's not something you would need to do often if you run a big capacity battery. Pheas

Hiya, it comes with the short one in the box. Hope that helps! Pheas

Hello! It will put some wear and tear on it a little faster than a 7.4v but they are built better now than they ever have before! MIGHT need a new piston at some point! Pheas

Hello! they are based off TM and Classic army designs, so just a general google around for "M16vn butt stock" or "M16vn handguards" should bring up some parts for you! Pheas

Hiya. Unfortunately not. They are only posting to the EU. Pheas

You can get a CYMA M16A1 gel blaster over here, they're getting hard to find now though.

Airsoft is illegal in Oz anyway.

Hiya! I have not heard anything different about any newer batches of these mofets, so I would expect that there is likely to be some form of issue where the mosfet will burn out on an 11.1v and you will need to replace it with something else. Pheas

@@PheasAirsoft sorry to bother you again mate, do you think Cyma’s Thompson is better than this M16? Cheers.

@@britishbastard6561 You ask as many questions as you need to. From my point of view... the M16 has far more parts available for it, and is far better documented. From having a quick look back at the thompson and its disassembly video I would say that the M16 internally is better built as it is a high end product from cyma where as the thompson seems to be based on the more budget materials used in the cm.500 series. SO I would, if it were me, go for the M16, but damn I do like a thompson! Pheas

@@PheasAirsoft cheers Pheas! Looking forward to your upcoming videos 👍🏼

Hello, internally it should be ok, the 11.1v will add more pressure to the internals, so they will MAYBE fail sooner than using a 7.4v but in general you should be ok. Pheas

I did indeed, but this was ordered a good while ago. TG are not currently posting to the UK... HOWEVER they have confirmed they are due to start again, but are conducting tests to make sure it goes smoothly as they had horrific issues with UPS and brexit etc. .... Just realised you might not be in the UK and just called English Andy.. If you are out side England /Scotland /wales /northern Ireland then you are good to order from them. Pheas

@@PheasAirsoft I’m in Sussex 😎 thank you for all the information

Hiya. Here is the direct link : www.taiwangun.com/en/assault-rifle-aeg/cm-009c-mosfet-edition-cyma?q=cm.009C&campaign-id=14 They are out of stock at the moment. If you are in the UK though I have mine available, if you want to drop me a message. Pheas

Hiya.Those are "common" speeds people ask for. If you ask for a different one in the order commentary then they will get it closer to what you want. Hope that helps. Pheas

@@PheasAirsoft Thanks for the reply. Is that what you did? I am also in UK and looking for M16 to take to sites with a 350 limit.

@@lockydouglas3018 it is indeed. Chose 360 or closest to it at time of ordering and then in the order comments asked them to specifically make sure it's under 350 but as close to it as possible. Worked a treat. Pheas

@@lockydouglas3018 It is. I choose the one most appropriate (closest to what I need) and then ask for it to be whatever I need. Pheas

Hiya! Any typical airsoft M4 mags should fit and feed in it, so just have a look round for airsoft M4 /M16 mags from local retailers and you should be all good! Pheas

Hiya. I am in in the UK. Im in Yorkshire to be exact! Pheas

@@PheasAirsoft Now that I've found a good shop through the net, in UK, I can not buy replicas 'cuase the country is no longer in U.E.!!! Another big dificulty to me ;....((((

@@pedrotome9119 Taiwan gun are in Poland, but if you are in the UK, as with me, I am awaiting to see what happens with the EU and importing stuff for the channel. Fingers crossed it's a good outcome! Pheas

@@PheasAirsoft Hi again! i know that they're in Poland but their prices on transportations are high to me now, and I am in Portugal. I do not play, I only collect what I like and can get. Lots of restrictions here too... And 23% of taxes when everything comes from out of U.E.right after 22€ is impossible to stand. And the Law does not for see that a fallow may simply want to collect and not play... To much weird to me. I'd love to live in France or evn in Spain...

@@pedrotome9119 Thats terrible that you have such high restrictions on importing!! Pheas

Hiya, yea it will! Pheas

Hiya. Here is one now www.taiwangun.com/assault-rifle-aeg/cm-009c-mosfet-edition-cyma?q=Cm.009&campaign-id=14 I will edit the video and drop one in the description now. Thanks let letting me know. Pheas

Hiya. It should take a bayonette on the front lug, but doesn't have an interface for any other attachments unless you add the rail yourself. You could at one point get an adapter to sit in the top of the carry handle site to give you a ris rail for an optic, after that it's slim options (barrel mounted ris attachment I suppose) without changing the front end. It should take an m203 though I would have though. Hope that helps! Pheas

@@PheasAirsoft Thanks mate I will take the cm072 instead then

Can't believe no one is stocking this in the US yet! I would have thought a lot of players would want to snap it up! Pheas

Currently in stock on Evike! Just ordered mine today. There’s a deal going on rn. Paid $199 (shipping included) for it (includes the battery, mag, and charger). The shipping may depend on your location though, I’m from Hawaii so that’s probably why it’s so expensive. Without shipping, it is $148.00

If you want to send me a DM on Instagram or an email to pheasairsoftyt@gmail.com or message the Facebook page I will sort you out. Pheas

Its about $196. Hope that helps! Pheas

@@PheasAirsoft Thank you!

@@bryanlim973 You are very welcome! Pheas

Hiya,. On Taiwan Gun right now they are around £125 before delivery costs. Pheas

@@PheasAirsoft ok thank you

They are excellent, just be careful about using 11.1v lipos. Quite a few people have reported that they have had their mosfets fry by using them, but seems to be more linked to the older ones than any newer ones. Pheas

@@PheasAirsoft thanks for the info, your vids are great to watch

@@nicecupoftea1389 You are very welcome! Glad you like my vids! Always nice to get good feedback! Pheas