How To Decide Position and Orientation of Columns in Budling Structure | Columns Position

  Рет қаралды 1,191

Practical Civil Engineer's

Practical Civil Engineer's

17 күн бұрын

Welcome back to Practical Civil Engineer's Channel,
I wish you a good day
If you are a technical person, you must have the knowledge about Column Layout in Building Structure
Deciding the position and orientation of columns in a building structure involves several considerations that are crucial for structural stability, architectural aesthetics, and functional requirements. Here’s a structured approach to making these decisions:
1. Structural Considerations:
Load Distribution: Columns should be positioned to efficiently transfer loads from the roof and upper floors down to the foundation. This typically involves aligning columns along load-bearing walls or structural grids.
Foundation Support: Columns should be positioned directly above or near the foundation footings to ensure proper load transfer and stability.
Column Spacing: The distance between columns (column grid) is determined based on the structural requirements, span of beams, and the weight of the building materials. This spacing should be consistent where possible to simplify construction and ensure uniform load distribution.
Material Constraints: Consideration of the type of material used for columns (steel, reinforced concrete, etc.) and their ability to support loads over spans without excessive deflection or stress.
2. Architectural and Functional Considerations:
Interior Layout: Columns can impact interior space planning. Their placement should allow for functional room layouts and clear circulation paths.
Exterior Aesthetics: Columns may be positioned to enhance the architectural design, creating pleasing proportions and defining the building’s façade.
Views and Natural Light: Column placement can affect the placement of windows and openings, maximizing natural light and views from inside.
3. Building Codes and Regulations:
Local Codes: Compliance with local building codes regarding column spacing, size, and placement is essential for safety and regulatory approval.
Accessibility: Columns should not obstruct accessible routes or spaces required by building codes (e.g., paths of egress).
4. Design and Engineering Collaboration:
Consultation: Architects and structural engineers collaborate to determine the optimal column positions. Structural engineers calculate loads and stresses to ensure columns are adequately sized and placed.
3D Modeling: Using Building Information Modeling (BIM) or similar technologies to visualize and analyze the impact of column placement on the entire building structure.
5. Construction Logistics:
Construction Sequence: Columns are typically erected early in construction to support subsequent construction activities. The sequence of column erection should consider logistics and access for construction equipment.
Steps in Decision Making:
Conceptual Design: During initial design phases, establish preliminary column positions based on functional requirements and architectural vision.
Detailed Design: Refine column positions and orientations based on structural analysis, space planning, and architectural detailing.
Review and Validation: Ensure that final column positions meet all functional, structural, and regulatory requirements through detailed review and validation by architects and engineers.
By carefully considering these factors and involving both architectural and engineering expertise early in the design process, you can ensure that the position and orientation of columns in your building structure are optimized for safety, functionality, and aesthetic appeal.
Hope to help you.
If you see this video helpful, please subscribe, like, share
Thanks you and enjoy your watching!
• How To Calculate Steel...
• Water Tank Size For Re...
• Bar Bending Schedule (...
• Basic Rules for Lappin...
#PracticalKnowledge
#Constructionofbuilding
#Estimation
#ACIStandard
#PracticalCivilEngineers

Пікірлер: 6
@AbdulHameed-im4mx
@AbdulHameed-im4mx 12 күн бұрын
Very informative, keep up the good work.
@CivilEngineers99
@CivilEngineers99 10 күн бұрын
Thanks for watching!
@stalinsubbiah3238
@stalinsubbiah3238 11 күн бұрын
Put video on building roof wiring
@CivilEngineers99
@CivilEngineers99 10 күн бұрын
Okay Dear i will try
@mehtabalikhuhro8382
@mehtabalikhuhro8382 4 күн бұрын
Mjhe sir layout samjh nhn ata h plz detail m video banaye reference kex lete h all to all
@CivilEngineers99
@CivilEngineers99 4 күн бұрын
@mehtabalikhuhro8382 inshallah I will Try as soon as possible
Became invisible for one day!  #funny #wednesday #memes
00:25
Watch Me
Рет қаралды 56 МЛН
마시멜로우로 체감되는 요즘 물가
00:20
진영민yeongmin
Рет қаралды 21 МЛН
Vivaan  Tanya once again pranked Papa 🤣😇🤣
00:10
seema lamba
Рет қаралды 35 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:25
CRAZY GREAPA
Рет қаралды 22 МЛН
Electricity class 10 ,Electricity class 10th notes
1:37
Learn English
Рет қаралды 24
Truss Dimensions
3:10
SBCA Channel
Рет қаралды 10 М.
Structural Engineering Was Hard Until I Learnt This
5:49
BEng Hielscher
Рет қаралды 23 М.
I visited 8 Chinese factories in 8 days... MIND-BLOWING!
50:00
EbikeSchool.com
Рет қаралды 99 М.
How I Would Learn Structural Engineering If I Could Start Over
8:39
BEng Hielscher
Рет қаралды 197 М.
Became invisible for one day!  #funny #wednesday #memes
00:25
Watch Me
Рет қаралды 56 МЛН