Learn to decide the orientation of Columns in a column layout | Structural planning | Civil Tutor

  Рет қаралды 33,354

Civil Tutor

Civil Tutor

Жыл бұрын

columns in a building usually have a rectangular cross section. To ensure effective load transfer, the columns need to be wider than the beams they support. However, some situations demand a greater cross section of the column to obtain a desired load carrying capacity and since the width of the column is restricted, it becomes difficult to achieve the required cross section.
In such cases, the required cross section can be achieved by increasing the depth of the column.
This may create problems when orienting the columns and to avoid this, I have discussed various points in this video which shall be noted.
Watch the complete video and Learn to decide the orientation of Columns in a column layout
Join our online courses here
fnrjb.courses.store/?filterId...
Complete Building Design combo course (Hindi + English)
fnrjb.courses.store/130675
Advanced Quantity Surveying + Bar Bending Schedule (Hindi / English)
fnrjb.courses.store/264604
Site Engineer Course
fnrjb.courses.store/137112
Quantity Surveying Course in Hindi
fnrjb.courses.store/52692
Professional Drawing reading course
fnrjb.courses.store/137097
Staad.Pro + RCDC Building Design & Detailing Course (English + Hindi)
fnrjb.courses.store/197012
Download our app here 👇🏽
clpsheldon.page.link/x3kb
Compiled PDFs👇
store.civiltutorofficial.com
Must-have books for civil engineers 👇🏽
The A to Z of Practical Building Construction and Its Management
amzn.to/3HKmjm9
Building Planning and Drawing
amzn.to/3sPztdA
Illustrated Design of Reinforced Concrete Buildings ( Design of G+3 Storeyed Buildings + Earthquake Analysis & Design)
amzn.to/3tD9aGq
Advanced Reinforced Concrete Design
amzn.to/3IRZwGn
Limit State Design of Steel Structures
amzn.to/3pIk1O6
Estimating and Costing in Civil Engineering (Theory and Practice)
amzn.to/3IWcwLq
The mic I use👇🏽
amzn.to/35ejhcN
#structuraldesignanddrawing #civiltutor #columndesign
►DISCLAIMER
The information provided in this video is for educational purposes only. The viewer is solely responsible for verifying the information and the use of the information in this video is at the viewer's own risk. The content is not intended to be used for professional or commercial purposes. The application of the information presented in this video on a construction site should be carried out only by a licensed and qualified civil engineer.
This video may contain copyrighted material the use of which has not been specifically authorized by the copyright owner. However, under Copyright Disclaimer under Section 107 of the Copyright Act 1976, allowance is made for fair use for purposes such as criticism, comment, news reporting, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.

Пікірлер: 10
@CivilTutor
@CivilTutor Жыл бұрын
Join our online courses here fnrjb.courses.store/?filterId=33&sortId=7 Complete Building Design combo course (Hindi + English) fnrjb.courses.store/130675 Advanced Quantity Surveying + Bar Bending Schedule (Hindi / English) fnrjb.courses.store/264604 Site Engineer Course fnrjb.courses.store/137112 Quantity Surveying Course in Hindi fnrjb.courses.store/52692 Professional Drawing reading course fnrjb.courses.store/137097 Staad.Pro + RCDC Building Design & Detailing Course (English + Hindi) fnrjb.courses.store/197012 Download our app here 👇🏽 clpsheldon.page.link/x3kb Compiled PDFs👇 store.civiltutorofficial.com
@alekhyan9443
@alekhyan9443 Ай бұрын
Thank you very much sir 🙏🙏🙏
@vayakattuchamy3347
@vayakattuchamy3347 Жыл бұрын
Sir It will easy for us to understand if you mention load applied by the beam 😢
@ashiqulalam8089
@ashiqulalam8089 10 ай бұрын
Sir please mention us the books where it is discussed clearly
@rynie8221
@rynie8221 Жыл бұрын
Wow really amazing sir 🙏🙏😊
@CivilTutor
@CivilTutor Жыл бұрын
Thanks a lot
@chethanmysore9218
@chethanmysore9218 Жыл бұрын
Good morning sir
@sagarmalge9552
@sagarmalge9552 Жыл бұрын
Hi sir... One dought. One of slab he gave conceld beam 12mm 4 bar. But he casted drop beam with out Reinforcement. But on that beam wall not come only live load will come.Slab spacing 8in c/c both side he have column. Is it take load. Or fail. Please help me.
@ashiqulalam8089
@ashiqulalam8089 10 ай бұрын
Please mention us the name of book where it is discussed elaborately
@justaconcrete4789
@justaconcrete4789 5 ай бұрын
I didn't get it, when u mentioned the column that have beams lie in the opposite direction, it means their momen canceled out, thus the momen's resisting by the column is just substraction from the spans. I thought the moment in the support of the beams is even greater. May u explain Sir the concept behind it? It will help me a lot
Playing hide and seek with my dog 🐶
00:25
Zach King
Рет қаралды 35 МЛН
Sigma Kid Hair #funny #sigma #comedy
00:33
CRAZY GREAPA
Рет қаралды 38 МЛН
How To Decide Position and Orientation of Columns in Budling Structure | Columns Position
17:28
Ductile Flexural Failure Video of a Reinforced Concrete Beam
4:14
Rabin Tuladhar
Рет қаралды 42 М.
How to decide Placing of Columns || By CivilGuruji
9:27
Civil Engineers Training Institute
Рет қаралды 292 М.
Maximum distance between two columns | Column size and steel details for G, G+1, G+2, G+3 | column
5:21
How to Decide Column Orientation | What's the Logic Behind Orientation |
24:53
Civil Brains - Civil Engineers Training Empire
Рет қаралды 2 М.
Structural Shapes Ranked and Reviewed - Which one Wins?
15:34
The Engineering Hub
Рет қаралды 680 М.
Playing hide and seek with my dog 🐶
00:25
Zach King
Рет қаралды 35 МЛН