How to Design Christmas Ornaments in Lightburn

Рет қаралды 34,952

2 жыл бұрын

How to Design Christmas Ornaments in Lightburn. In the episode, we are designing ornaments in Lightburn and cutting them with the Ortur Laser Master 2 Pro. Lightburn is an excellent tool for your laser. And designing Christmas ornaments is a great way to learn the ins and outs of how to.
Download Lightburn (free 30 day trial):
lightburnsoftware.com/
Louisiana Hobby Guy:
/ thelouisianahobbyguy
Check out the NEW WEBSITE: www.builddadbuild.com/
MERCH!! (help the channel out by picking something up for yourself!): build-dad-build.creator-sprin...
DISCORD: / discord
PATREON: / builddadbuild
DISCLAIMER:
Working with Fire, lasers, Electricity and Power Tools is extremely dangerous. Please use caution if you are attempting anything in these videos.
Also, please drink responsibly.
_____________________________________________________
USED IN THIS VIDEO (affiliate links):
Wide Masking Tape:
amzn.to/31dLkXN
Ortur Laser Master 2 Pro:
www.madethebest.com?aff=53
Link to all my tools:
www.builddadbuild.com/toolshome
_____________________________________________________
Don’t forget to Like, Comment & Subscribe:
/ builddadbuild
_____________________________________________________
ADD ME ON:
Subscribe: / builddadbuild
Patreon - / builddadbuild
Discord: / discord
Instagram: / builddadbuild
Facebook: builditburnit
Twitter: / builddadbuild
Pinterest: / builddadbuild
TikTok: / builddadbuild
_____________________________________________________
MUSIC:
Chtulthu
#builddadbuild #youtuber #contentcreator #houston #texas #maker #woodworking #makersgonnamake #makersmovement #diy #madebyhand

Пікірлер: 57

@tajclimbing Жыл бұрын

Hello, my name is Tajuddin. I have benefited a lot from these videos that you publish. Thank you. It even opened a new door for me to earn a living.

@BuildDadBuild Жыл бұрын

Awesome!

@TheLouisianaHobbyGuy 2 жыл бұрын

*Thanks for the shout out and the link Dad!* Great video!

@BuildDadBuild 2 жыл бұрын

Any time! Love your videos! Cheers

@TheLouisianaHobbyGuy 2 жыл бұрын

@@BuildDadBuild Thank you Sir!

@richwhilecooper Жыл бұрын

In fact not only did I make them I am selling them like crazy, sold a whole bunch of sets of 5 of various designs for £10 a set. People just love them and my coasters with various dogs engraved on them. 3 weeks after getting my laser I have sold £100s of stuff to family and friends and neighbours. Took the dogs for a walk, I got 3 orders. Always carry samples, always be selling!!

@richwhilecooper Жыл бұрын

Thanks for this video, I did this in a few minutes having never used lightburn before. Looking foward to testing it out when I get my laser in a couple of weeks!

@gracieannweim5812 7 ай бұрын

Hi I love the way you teach, finally I found someone who rocks.

@BuildDadBuild 7 ай бұрын

Thanks homie!

@joelepack938 Жыл бұрын

Yup. very well done video. I made a nice Christmas ornament. Thank you.

@MegaDwsmith 2 жыл бұрын

Awesome Vid!! and Hobby Guy is a great go to for Lightburn

@BuildDadBuild 2 жыл бұрын

Great resource!

@wocketman1629 Жыл бұрын

Great video. Helps me with my designs!

@vincentlekei1969 6 ай бұрын

Awesomeness well I’m going to try this out thanks man 😮

@moisescontreras1168 2 жыл бұрын

Like all ur videos amazing great work Nick thank u very helpful 🍻👍🏽

@BuildDadBuild 2 жыл бұрын

Thanks Mo! Cheers

@nabrup3 2 жыл бұрын

Fantastic!

@BuildDadBuild 2 жыл бұрын

Thank you! Cheers!

@Aspire2Cycle 2 жыл бұрын

Just got my "baby" GrillBlazer today! Thanks to you Nick, I saved 25%! Can't wait to light this baby up 🔥

@BuildDadBuild 2 жыл бұрын

Sweet! You'll dig it!!

@bryanvan1929 2 жыл бұрын

You can paint the text before you peel the mask, it turns out great

@BuildDadBuild 2 жыл бұрын

Awesome

@MichaelDavidHiltner Жыл бұрын

Had some friends over last night, and I made a couple personalized Tree Ornaments for the Kinder! The whole family was blown away at how professional they turned out! P.S. still have yet to figure out that shift+frame issue... LOL... Least of my worries! As long as what comes off the laser bed is Beautiful!

@sixptstar Жыл бұрын

Great video. I've made quite a few ornaments now. Lots of fun. Not sure if it is just me, but I kinda feel like my xtool does a better job with Lightburn.

@ChadSmithakaCCG 2 жыл бұрын

Who knew they made 12" masking tape!? :O That is awesome. Thanks for the video.

@BuildDadBuild 2 жыл бұрын

Right? LOL Cheers

@earthlifeus1656 2 жыл бұрын

Transfer tape comes even wider, used for vinyl lettering

@jm1964jmir Жыл бұрын

estupendo video, si señor, muy bien explicado, paso a paso como se deben de explicar los videos. un abrazo desde españa

@BuildDadBuild Жыл бұрын

Gracias

@earthlifeus1656 2 жыл бұрын

Sometimes dampening the transfer tape with a sponge will help it lift off easier

@TheRoadRoamer Жыл бұрын

There's always many ways to do things but while watching I was wondering why not use the offset too to get your concentric pair of circles? Just curious.

@Jsmilam Жыл бұрын

🎉 Cheers I was wondering can this be done on an Xtool D1 pro 10w always love your content. Keep creating

@BuildDadBuild Жыл бұрын

Sure!

@dbredeson77 2 жыл бұрын

Great video. What was the thickness on the walnut you cut?

@BuildDadBuild 2 жыл бұрын

Thank you. It's 3mm Cheers!

@wadetomczyk8043 2 жыл бұрын

Noice!

@BuildDadBuild 2 жыл бұрын

👍

@Jaydawg1250 9 ай бұрын

Do you think a better laser might do a better job with the details to not have to use an exacto for the snowflakes? That seems rather tedious. Could it also be the wood with the laser? I’m in the investigation stage on looking for a laser and been watching the xTool D1 Pro as well as Omtech and others. Not criticizing your cutter or file. It’s quite impressive but just curious if other cutters might better get through the snowflake.

@MichaelDavidHiltner Жыл бұрын

I have a question about your comment about the SHIFT key while Framing your project work area. Does it fire your laser (light) at the percentage that is selected in your project (75% for your Ornament Cuts), or does it default to a very low value, just to trigger the laser light (say less than 5%)? Thanks for your video! Once I get this answered, you'll have shared 3 NEW things that I never knew about for my laser or lightburn! I've never seen the laser light up when I have done a Frame of my projects. Will b e nice to see that happen.

@BuildDadBuild Жыл бұрын

Once you enable the "fire laser" button it allows you to pick a low power. I usually use 3%

@billhartman150 Жыл бұрын

I have found, if you go at a lower speed and less power for more passes, you don't get as much charring.

@goshamei Жыл бұрын

Thanks for this one, what do you use for masking th wood?

@BuildDadBuild Жыл бұрын

12” masking tape

@goshamei Жыл бұрын

@@BuildDadBuild thanks, I am a newbie on this, but is watching you "carefully" from Norway. Sometimes I don't have the same equipment as you have in the US, so I google to see what it contains (like spray paint), and then I go ahead testing 🙂 And never mind swearing, you sounds just like me when running the laser 😀

@housemancreationsco 2 жыл бұрын

How thick was the walnut?

@BuildDadBuild 2 жыл бұрын

3mm walnut plywood Cheers!

@deonettag4559 7 ай бұрын

Where do you buy the masking tape? My 16 year old son just got a laser cutting machine and he doesn’t like the burn marks you get on the surface of the wood.

@BuildDadBuild 7 ай бұрын

amazon!

@tonycoffman7264 Жыл бұрын

Yes I have managed to get all the way up to the snowflakes but I can not get them to boolean I have watched your every move for 3 hrs with no luck can you tell me what I'm doing wrong Thanks

@BuildDadBuild Жыл бұрын

Email me nick@builddadbuild.com

@mattchis 2 жыл бұрын

Where do you source your walnut ply?

@BuildDadBuild 2 жыл бұрын

I don't normally use ply. I like hardwood better. More consistent. Here's where I order from: ocoochhardwoods.com/ Cheers!

@mattchis 2 жыл бұрын

@@BuildDadBuild Thank you! Your Videos are amazing!

@mtanner47 Жыл бұрын

So when I create the name box where I am going to put the name, it disappears when I try to weld the shapes together. Not sure what I am doing wrong..

@BuildDadBuild Жыл бұрын

Email me nick@builddadbuild.com