Your first Christmas Ornament on your laser with LightBurn

Рет қаралды 9,097

2 жыл бұрын

In this video I show you a simple way to design a Christmas ornament with circles, snow flakes. You will lear the circular array tool and many more. Fun project for the beginner.

Пікірлер: 35

@bayfild Жыл бұрын

Like the way you show how to make a box for beginners

@computercreationz Жыл бұрын

There allot of fun!

@teque-awanderer1341 Жыл бұрын

Thank you!! You have a nice voice and you don't have music blasting over it which I really appreciate! And your instructions are easy to follow!

@computercreationz Жыл бұрын

Thank you so much!

@joshuas5504 2 жыл бұрын

Just wanted to say thank you for all the insight you share on this channel. You are helping so many people.

@computercreationz 2 жыл бұрын

You are so welcome, thank you for your kind words I appreciate it!

@ervinwhite8604 Жыл бұрын

Just started using Lightburn. Thanks for the video it is great.

@computercreationz Жыл бұрын

it’s great software. thanks for the comment

@xmrgwxw3474 2 жыл бұрын

Thanks so much. I really enjoy your easy going style. Every video is full of useful and interesting information. I must admit your videos inspired me to build my own 100w laser. Best wishes and keep up the great work.

@computercreationz 2 жыл бұрын

You are so welcome!

@jasongibson1823 2 жыл бұрын

Great video as always! Learning all I can before my ThunderLaser 35/100 shows up.

@computercreationz 2 жыл бұрын

Congrats on the laser I love mine! Thank you for your comments!

@anthonymyers-35 2 жыл бұрын

Really enjoy your help!

@computercreationz 2 жыл бұрын

I appreciate your comment.

@lucyluera3775 2 жыл бұрын

Thanks!

@computercreationz 2 жыл бұрын

Thank you so much for your donation, I really appreciate it!

@wendyrossman3756 2 жыл бұрын

Thank you so much for the walk through on steps. So helpful. Question where do you source your unison from?

@computercreationz 2 жыл бұрын

unisub is sourced from Jds, conde, Jpplus it’s not easy to find right now. the other alternative is dry erase board that is black on one side whit on the other

@stevewright2175 10 ай бұрын

Very instructional video, I have only just started but first question if you please where did you get the snowflake in Lightburn.

@computercreationz 10 ай бұрын

a number of different design elements I drew and purchased from Etsy

@WooderBoyProductions Жыл бұрын

Do you have the file for this project anywhere?

@computercreationz Жыл бұрын

I don’t these where custom designed for a client.

@ravistb09 2 жыл бұрын

How well does your laser handle the unisub hardboard for sublimation? I've been using a laser at a makerspace while toying with the idea of buying one for myself, but the one I've been using takes multiple passes to get the unisub hardboard cut. Not sure if it's the laser just being older or if the unisub is just hard to cut.

@computercreationz 2 жыл бұрын

My Thunder Nova 35-100 watt laser cuts the 1/8” unisub hardboard single or double sided like hot knife through butter in one pass. Even my 60 watt worked fine on this material. It will take less than 1 minute to cut out ornaments shapes like this.

@travisbenson8657 2 жыл бұрын

@@computercreationz Hey there! I finally got my 51/100 today and have been playing with settings and such today. Do you mind sharing what your settings are for your 35/100 for cutting unisub?

@computercreationz 2 жыл бұрын

@@travisbenson8657 22 mm/s and 80% power with external air at 35psi at the nosel.

@travisbenson8657 2 жыл бұрын

@@computercreationz Thank you so much. Its a chore trying to figure out where to start with settings. I'm coming from using a Full Spectrum laser at the local makerspace, and am just shooting in the dark with most settings.