That’s my board! Thank you so much Alex not only did you save my board but you saved me thousands in truck repairs that would have been required if I didn’t get it back!! Thank you!

I appreciate you calling out the hot air temps you used in this video. I wish you did that all the time

I love that smile when the repair is successful, love your channel, keep up the great work!

You're techniques is amazing! I was giving up on repairs. I'm not as nearly good as you but I'm certainly better then the others in my town thanks to you!

These connectors are really sensitive to heat! Thanks for sharing the video, it's a good reference for anyone who needs to learn the process (or encouragement to overcome the fear)

You do meticulous and quality work. I'm so glad I found this channel.

Absolutely love your videos, I’m in the U.k Wolverhampton. God bless you guys, doing a great job. Thank you ❤️ Ravi

Its always nice to see your vids, there is always a new information I learn in your vids n very proud of you every time you do some some thing you put the credit as “we did it” even though it’s you actually did but just the humble words n you are such a lofty perch

thx for the tutorial, learned a lot new stuff about FPC connector (de)soldering!

Connectors like FPC connectors are really only available in a couple variants, top contact, bottom contact, dual, and then the pin pitch and mounting style. I'm pretty confident you could measure that connector and find a suitable replacement if a donor board wasn't available.

Nice job, awesome as always. I learned so much from your repair-videos. I dont know why but i love those kind of specific electronic stuff-repairs more than the iphone or ipad repairs, but thats what i like too

Sir that was indeed biggest port I have ever seen to be soldered. Perhaps very few people who can solder it . Indeed u r the master of gems MashaAllah. A diamond and platinum technician I have ever come across. Good luck further sir

For tasks like that you want to use a hot air BGA machine. Where I work I use a Honton HT-R390. Company got it 8 years ago and it does component removals like that with ease. In the 8 years I been using the machine to replace connectors (currently use it to replace lvds connector on Apple motherboards) I have never melted a connector. Sometimes customers want to replace the faulty component themselves thus if we have a scrapped board available, I will use the BGA machine to remove the connector from the scrapped boards. Comes of the pcb perfectly. I used to use a Weller heating plate with a hot air gun to remove components because the small size of the heating plate and the hot air gun was perfect size for a work bench but over time, some of the components I had to remove needed more heat due to the size and the thickness of the pcb which meant I had to go for something a bit bigger. We already had the BGA machine and I wondered if it could remove plastic components without melting them and it can.

Very nice work Alex and thank you for sharing. Hello from Sheffield in the UK 😊

20 min video !! Thank you Alex, allah yahfadhak ❤️

Another great repair, keep up the good work 👍

This man is fantastic explained it nicely, logically thank you sooo much.

delicate work, almost surgeon like, wick pressure? you say barely touching the pads... well done...

Alex, I have a batch of Nintendo 3DS and 3DSXL FPC connectors to repair on my Instagram channel. Before retro hardware got to be too expensive, I acquired the worst basketcase consoles I could find on eBay and set aside the boards I found with bad FPC connectors, as I considered that repair to be for the future when I was more skilled. I have ordered some low melt solder from your website and I think I'm going to give it a go. At least some of the connectors can be had from China now, as donors become brittle with age. The largest connector I've been successful with is four pins but after watching your video I have new confidence. Used working 3DS XL consoles especially are very lucrative right now, so thanks in advance.

The red glue is for securing the heavy connector in the second part of reflow. Heat causes the glue to harden on first pass of oven. When other side of pcb is component placed then reflowed, the glue stops the part falling off. It does little to really secure the part so the side mount points should be re-soldered for strength. So don't re-add glue.

Nice work man. Great ironing.

show off .:) flicking the pad into place . i love your work

يعطيك العافية محبك من سوريا 😘😘

o my God you so good . have these prblm in me . its so satisfaying to worck like that or to watch you doing it . God bless you SIR

Logical order of thinking, always good to ponder prior to action/execution. Kind of like making a shopping list, even if the list isn't used it still has some positive effects.

Smile like a winner, after repair is successful. 😊 Stay blessed and happy.

Amazing patience! I would have chucked it in the bin....

Amazing work 🙏🙏🙏

That really nice work brother.

Türkiye'den selamlar. Mükemmel işçilik

Thank you nice work!

Great job and video like always

Lovely job

You are Professional!

Nice job!

Sir u are wonderful. I also have a problem with an pcb. 1 year ago my workstation crashed. After searching for 2 days finaly found out my datastore hdd had given up. I located the problem to the controller of the board. Since then i m looking for someone who can transfer bios chip to a new pcb. I think about ti try it myself afer i seen ure vids. 🖖🇦🇹😗

Great job as always , Who could dislike that, Elekworld? 😁

any question i ever have about soldering or removing something you always have the answer and with great detail. love it. thank you! one question i do have though, say i fucked up the connector trying to remove it...(hint hint lol) where would the model number be? on the bottom? would a connector work of the same type, pin count and distance between pins for a display ribbon cable?

great job.

I was trying that today! If I've seen your video before it would been easier to me LoL

Good job

love u bro u re work....

I think you should raise your prices. Yall definitely deserve it. What u charge for this repair. 175 + Sounds good to me.

good job😊

very nice job love you

Very nice

Awesome how u saved the bad pad. Well done master Alex lol.

Very hard work

You are the King 🤴

i cant wait till you get to my H&S tuner......Roger

good &thanks

Dark Infrared soldering station works great for connectors. It only heats the metal parts and does not burn the plastic.

maşaallah wery nice jop Greetings from crafting the perfect turkey

PCB's are art.

Awesome

Alex, I have learned so much from you and I really appreciate your terrific videos. Could you please mention centigrade or fahrenheit when you mention hot air degrees? I have not yet mastered hot air reflow. Thank you from Hawaii. Aloha

Excellent work on that plastic connector, would have been ruined by most.

3:49 the SOUND of dragging a flux syring on the pins🌝

hi friend...you can use fireproof tape when removing some plastic connectors...i use it and i am not afraid anytime...

Super ..what use fluxside please..

Sri lanka .good job

nice 👍👍👍👍👍👍

How would you compare this to using the chip quik low melting point solder? I love using that stuff for mod jobs

viewer happy too. nicely done. your soldering technique is really awesome. so good so clean.

And once again low melt solder comes in to save the day! Awesome stuff

Electronics repair depends on wisdom, imagination and intelligence

You make it look so easy. I wish I had your agility! I am trying to find a video from your channel that shows how to reconnect a plastic connecter to a board. It looks like it is just set in place with some solder on each side. The board is: rsag7.820.7351/roh and it is the white connecter that goes to the on/off - IR button. Any help would be appreciated or a link to one of your videos. Thank you

Am from India sir

nice video what is the name of thise tip big one

Great job transfering the connector! Alex for the win!

Hello fellow valley guy!

Hi I'm just wondering ! What type of hot air machine you use ?

What type of Solder Wick are you using?

Awesome like always after all I am the 1 one here to like and say best tech ever

سلام تحية لك أخي والله عملك رائع متابعك من الجزائر

Thanks for the videos! What's the microscope you're using?

Which paste did you use?

what was the temp you used and the flow rate?

Love to see your work

Wow

Alex, I'm dealing with the same thing with a 40 pin connector for an edp cable but Im completely missing most of the pads on the board I need to solder on. Help!

I have a ribbon cable that shows wear at the contact points. Also, the clips that hold the ribbon cable locked in has the 2 locking tabs broken off. To fix ribbon cable, I could cut off a strip to shorten it which would change the contact points. But I would have problem holding it in place. I tried cleaning contacts with alcohol and then pushed back into slot. I then applied hot glue on back side of cable to hold in place. This worked for a couple of weeks but I think I have bad connections again. I even thought about replacing connector on board, but not sure what to get. Only know that my cable is 15 pin. This is on a stove/range. The other ends of the ribbon are attached to splitters which go to various buttons on the face of stove. What should this cost to repair?

It's like when you work on a Pioneer or Kenwood stereo, if you LOOK at the traces they peel off! LOL

Can you tell me what r those red glue on the connector I need to buy one??

Sir can you fix the special d-link router?

Where did you learn how to do all of this stuff?

"we did it" - what a relief

What you think about the IPhone 12 that isnt even repairable with original Apple Parts?

Soooo easy

This guy is the definition of Inception!

👍👍👍

Assalaam thanks for your soldering tricks I have learnt a lot from your videos... My cheap hot air station is working good should I get an advanced hot air station or should I continue with the cheaper one... Hoping a reply from you

Hi, Alex i have a Samsung Galaxy Tab E 8.0 inches tablet. My digitizer screen FPC connector on the motherboard the latch and the plastic is damaged/broken. I have a donor motherboard and two new FPC connectors also that you can use if repair goes wrong. Can you repair it.

How do u remove the screen from that strip and reconnect

Greetings from Turkey

Good job Sir

Why you not use solder paste

How many pin it have

Bro is it same ps3 fat conector or diffrent

Why do you need to prep the board on which you want to put the connector? And why do you prep it by putting on solder and then taking it off again with a wick?