iPad mini 2 Digitizer FPC connector replacement. Hot air station and temperature settings

Рет қаралды 65,454

4 жыл бұрын

⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com

Пікірлер: 96

@gfmoore Ай бұрын

I really like the way you didn't disparage the customer for his mistake, you just accepted it, moved on and fixed it for him. Very kind and very nice.

@tonysfun 4 жыл бұрын

You make thinks look so easy, but it requires a lots of skills and patience with experience and constant learning! Thank you for sharing your work with us! Have a great day!

@sharfazhameed6382 3 жыл бұрын

A perfect selfless No1 technician I have ever seen on KZfaq. May God bless you more n more n your defining methods are very easy to grasp by anybody.

@pandrosik 2 жыл бұрын

I realize this is an older video however thank you for describing your heat & air speed settings as you go along. I try to do this as a hobby and I’m always interested in understanding how you approach your work. I know you say your experience is the reason why you charge what you charge regardless of how long it takes you so I appreciate when you share little pieces of your knowledge.

@BroadwayNexp 4 жыл бұрын

I love it when you explain what your doing / why that way / temps your using. Excellent video! But im just wondering, how did the small SMD filters not just fly away? they seem to just fly away with heat and air

@MrDemonKing21 Жыл бұрын

I know this is an older video, but it made me smile when you were talking about the Solder Stations. The difference between a good solder machine and a cheap one, saying if it can sense if the tip is loosing heat to the motherboard or not. I just blurted out "You mean if the solder machine has a good Thermocouple that send signals to the heater control card/chip or a cheap ass Thermocouple." We use Thermocouples in the Hot Runners at work so the Heater Control Panel Array can supply electricity or not to keep the Heater Bands at the right melting point for the plastic resin without burning the resin. This is inside molds that heat plastic resin, inject it into a mold, and make plastic auto parts.

@113odyssey 2 жыл бұрын

You're channel is great man! I've learned so much watching you work

@mounir7056 3 жыл бұрын

The method of explanation is distinct and the language is fluent. I am from Morocco and work in the same field. Good luck.

@franciscoponce7981 2 жыл бұрын

man wow your the only person that described why there was different price points for tools and what the difference is on the internet. i couldnt find this info anywhere when looking to buy tools a few months ago. everything i found was vague like, " its just heats better" or 'heats up faster". as a beginner that didn't make much sense lol now i know

@da_chief 2 жыл бұрын

Better than factory as usual! great job Alex!

@zaksoft7290 4 жыл бұрын

I love you man. I benefited a lot from your videos , i am ZAKI from Algeria...

@NorthridgeFix 4 жыл бұрын

Thanks brother.

@andrasszabo7386 3 жыл бұрын

Keep up the brilliant work by the way :) I always watch your videos whenever I have free time for it. I have learned a lot from it. Too bad that I live in Europe and not in USA, because I'd like to work for you.

@deathtrap1976 4 жыл бұрын

Thanks for the lesson. FPC's are one of most terrifying pieces to handle with.

@donnan9548 2 жыл бұрын

This video is awesome. Thank you for sharing. Your work is spectacular as always.

@syedshoeb5438 4 жыл бұрын

Thank you for telling us the temp & air control,as i allways get confused in setting..kindly share with us what temp and air control to be set for..ic like u2 size or bigerr size ic..nand chip...tin removal temp...regards

@ahmedbenghait343 4 жыл бұрын

Perfect job and thank you for the great information

@muhammadmamduh1654 4 жыл бұрын

I like your work thank you.Greetings from Egypt

@Megadpss 3 жыл бұрын

Greetings from Romania.Very professional explained

@sarahwreisner8718 3 жыл бұрын

I absolutely love your videos.

@ratanrohit6061 4 жыл бұрын

this video you explain perfectly, thank you

@sarahwreisner8718 3 жыл бұрын

Beautiful work.

@shomer2009 4 жыл бұрын

Very professional. Good job

@doobz2oon334 4 жыл бұрын

As always great work :)

@Jatrki 4 жыл бұрын

Nicely done!

@stoicmindset306 4 жыл бұрын

Amazing work always sir, Beats me how that plastic part of the connect didn't melt even one bit

@Mocredible Жыл бұрын

That’s what I wondered.

@richardsamanthajones5476 3 жыл бұрын

Your videos relax me thx you.

@karotesla 2 жыл бұрын

Thanks a lot. Today I replaced a FPC conector and your video helped me to achive it 😃👍

@jacobludden6615 3 жыл бұрын

Thank you for the video. I have a risky FPC connector repair in que and I am wondering what you used for the heat shield and if something similar is sold on your site?

@mr.haseebkp2782 3 жыл бұрын

Amazing work

@angelizqn 3 жыл бұрын

Very well explained.

@simo4825 4 жыл бұрын

Great job bro

@Keythong 4 жыл бұрын

This sort of job should only be attempted by experienced professionals like you sir.

@NorthridgeFix 4 жыл бұрын

I appreciate the good words

@frizzlefry1921 4 жыл бұрын

Learn how not to destroy connectors and soldering on junk first. Either way things will happen, toshiba laptops had a zif socket on the board you looked at the tab and it shattered! After all their trying to maximize profit, but Ive never seen a jack that mangled and not tore off the board!

@edgar9651 4 жыл бұрын

Thanks for the temperature info. You and others use a solder and not solder paste. Why not solder paste? I thought that is what should be used with hot air.

@sifiishaque7583 3 жыл бұрын

When you soldered new FPC connector, i saw some liquid flux got inside the connector, it wont affect when you put lcd connector back on as it becomes solid underneath?

@andrasszabo7386 3 жыл бұрын

I have recently bought a Hakko 852d and 851 (built together in one custom case)dual station with iron and hot air,but not with a ventillator in the handle. Instead, it has a big air compressor in the base. I wonder if it is good or not? Is it accurate in temperature metering? And is it reliable enough for long-term use? I am asking this here because you have probably seen/tried more of this stuff in your life than I ever will. I also have a 220v 75W Weller station but that is just a soldering iron with solder sucker tip and no hot air stuff came with it.

@joeysupra311 4 жыл бұрын

do you have a list of all the equipment you use? i am learning and would like to buy all your equipment if its available on your website, thanks!

@zandagrouzdon5044 3 жыл бұрын

How do you stick display to the body ? With liquid adhesive ? Or with that double side adhesive tape like ( super thin)

@rayeeskhan127 4 жыл бұрын

Hello sir. I am for india and I watch your every video your work is too good sir

@NorthridgeFix 4 жыл бұрын

Thank you Ray

@Dr.muthanna 4 жыл бұрын

Perfect job

@NorthridgeFix 4 жыл бұрын

Thank you brother

@akrammoftah1910 3 жыл бұрын

شغلك احترافي ماشاء الله

@sddkldz683 3 жыл бұрын

What kind flux cleaner are you using?

@jigarkothari1425 4 жыл бұрын

Take care you and your family 🙂🙂🙂

@NorthridgeFix 4 жыл бұрын

Same to you brother

@jigarkothari1425 4 жыл бұрын

@@NorthridgeFix bro we love you

@donnierobertson3088 4 жыл бұрын

Great job again like always

@dragonnorway Жыл бұрын

Replaced a moto one scren fpc connector for my wife, it is way harder than you make it look, and as you say, a good soldering iron is alpha omega, as with all repairs is low melt solder!!

@Tommymang 3 жыл бұрын

What’s the temperature of the soldering iron please?

@user-lr7rt3jq1f 4 жыл бұрын

شكرا

@bharatkumarone 3 жыл бұрын

Sir i need tools like you have. please can we suggest for buy in india

@bmwmpower1491 2 жыл бұрын

Good Job! Please Info about Soldering Flux, Temperature of Soldering Iron, and Hot Air Gun Please.

@NorthridgeFix 2 жыл бұрын

Temp 430c northridgefix.com/product-category/soldering-equipment/ and flux northridgefix.com/product/amtech-nc-559-v2-tf-flux-10g-syringe-plunger-2-needle-sizes/

@Southridgerepairs 2 жыл бұрын

Do you run your hot air on 220V or 110V? Any advice where to find the hot air station? I only see fakes for sale

@audrimars 4 жыл бұрын

good work

@NorthridgeFix 4 жыл бұрын

Thanks brother

@carltonbless5992 2 жыл бұрын

Kindly send me the link to purchase these connectors.

@I_SuperHiro_I 2 жыл бұрын

How does the manufacturer solder the connector on without melting it?

@Senior. 3 жыл бұрын

*Hi.* Do You know where to buy rear camera connector FPC 37pin (20+17 pins)??? Do you have to sell?? Looking for it over a year :( Or I will buy damaged Xiaomi Mi5 motherboard with good connector!!

@syaifulsarnawi9607 4 жыл бұрын

good equipments help to get optimum or perfect result

@NorthridgeFix 4 жыл бұрын

100%

@omarbakr7445 4 жыл бұрын

الله ينور عليك👍

@NorthridgeFix 4 жыл бұрын

على راسي

@oshacochan2702 2 жыл бұрын

i have quarter here wowww how big it looks under the microscope :)

@electionelectronic9864 4 жыл бұрын

Hello sir I am Indian watching video nice work thank you

@electionelectronic9864 4 жыл бұрын

Hello sir circuit diagram website

@paulzac5481 4 жыл бұрын

@@electionelectronic9864 just use google search for schemaics

@Wingedmechanic 2 жыл бұрын

Wonder how the plastic holds on while the lead melts under it.

@KimoKimochii 2 жыл бұрын

celsius or fahrenheit?

@techengineers4579 4 жыл бұрын

Hi sir... Can u send the thermal camera buy link

@NorthridgeFix 4 жыл бұрын

rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dflir%2Be60%2Bthermal%2Bcamera%26_sacat%3D0%26LH_TitleDesc%3D0%26_osacat%3D0%26_odkw%3Dflir%2Be60%2B&campid=5338440312&toolid=20008

@renebea9 Жыл бұрын

why the new connector doesn't melt the plastic? the old one does.

@jigarkothari1425 4 жыл бұрын

You are awesome... how is going corona there... I m worried about you mate

@NorthridgeFix 4 жыл бұрын

I'm keeping distance and not allowing customers inside the shop. Also wearing gloves at all times and disinfecting everything that i get my hands on.

@jigarkothari1425 4 жыл бұрын

You are the best bro we all love to see your videos ..you are the master of fixing any motherboard. Happy weekend...ebjoy🙂🙂🙂

@THEMK0070 4 жыл бұрын

Where can we get schematics for apple devices and do you know how to unlock icloud?

@NorthridgeFix 4 жыл бұрын

@George Roper 100%. You can find everything on google. Just search

@bharatkumarone 3 жыл бұрын

can we work with you in India.

@hambaberdosa6474 9 ай бұрын

very exspensive weller..........

@katjamorgen8334 4 жыл бұрын

hello please can you help me iphone x stuck at 3 percentage .. I need your answer as soon as possible

@katjamorgen8334 4 жыл бұрын

or fake charging

@NorthridgeFix 4 жыл бұрын

@@katjamorgen8334How will i know without testing ? Allot of things can cause stuck percentage,

@katjamorgen8334 4 жыл бұрын

oh yes you are right, but i just wanted you to help me ,"with the known causes". Charging ic and so on

@palmeidal Жыл бұрын

400c?

@jagadeeshapatil75 2 жыл бұрын

alex old connector burnt but managed to put best quality connector without flying neighbour components. 😏

@raulmorel1 4 жыл бұрын

first best tool is the brain then other

@jionithin1157 2 жыл бұрын

@jesusyuca1483 2 жыл бұрын

Next time try lowering air speed. You got away with it because you are very skilled. However you are not doing anybody favors telling them to use high air flow. It’s way to easy to screw up.

@MP-yt4cx 4 жыл бұрын

I assume this is a plastic connector how come it not melt plastic at 400 degree?

@NorthridgeFix 4 жыл бұрын

The connector can handle heat but has a breaking point. Knowing your hot air station and how far you have to be from the connector and when to pull out, only comes with hands on practice.