How to diagnose and change an anti-roll bar drop link.

Рет қаралды 58,027

2 жыл бұрын

In this video, we look at how to diagnose worn out drop links on your anti-roll bars. or sway bars. And we look at how to replace them. In this instance, John demonstrates on his 2007 Nissan Elgrand E51 but diagosis and replacement are almost identical on any car. Drop links are sometimes referred to as tie bars or dumbbells
We also discuss how the anti-roll bar works.
If you are interested in any of the tools or products that I use in my videos then check out To the Garage's NEW Amazon Store.
www.amazon.co.uk/shop/tothega...
Please subscribe and click the notification bell. If you wish to support our channel, why not buy a sticker or other item of our merchandise. This link takes you to the 'To the Garage' shop. www.tothegarage.co.uk/shop
“When you click on some of the links provided in this description, or on the website, and then decide to go on and make a purchase, this can result in this channel earning a small commission when you make qualifying purchases. Programs and affiliations include, but are not limited to, the "eBay Partner Network.” and the "Amazon affiliate network" Using these links does not increase the price that you pay in any way.
Thank you for supporting To the Garage.”
Intro, Outro and bed, theme music were written by Craig Blundell. They are his copyright and provided to ‘To the Garage’ for its exclusive use. They may not be copied or used outside of ‘To the Garage’ KZfaq channel without his written permission.

Пікірлер: 88

@charlesmarinier5255 9 ай бұрын

The only video I have seen that shows what a worn sway bar link looks like. Well done.

@ToTheGarage 9 ай бұрын

Thanks Charles👍

@dm1mccormick 5 ай бұрын

Great video and really excellent explanation of how the anti roll bar actually works. Only point I would add is when I first did this job and tried to undo the old link the nut and bolt just kept turning together. I hadn't realised there was a hex shaped hole in the centre of the bolt end that you needed to hold steady with a hex bit to stop it turning as you undid the nut. Wish my car had those handy tabs as makes this job a lot less fiddly.

@UdoIBress 2 жыл бұрын

I often have this problem. We still have some very bad roads here. So very often this repair is needed. But it's easy work. Thanks for showing us the VID.

@ToTheGarage 2 жыл бұрын

Thanks Udo. Yes our pot hole situation is also very bad. so drop links suffer a lot of punishment

@JohnLyon-wb5dz Жыл бұрын

Great video. Just ordered drop links for my 20 year old Mitsubishi galant. Looking forward to them arriving and doing the job. Great video. Thanks

@Yo2condoit 2 жыл бұрын

Impressed with faultless camerawork.

@ToTheGarage 2 жыл бұрын

Too kind👍

@joneslive586 Жыл бұрын

Excellent explanations!! Thank you, great teacher ! 👍

@ToTheGarage Жыл бұрын

Thank you! 😃

@Smith6265 10 ай бұрын

@@ToTheGarage Hello ,My drop links at the back have totally worn out but every time I go over a bump it sounds like it’s coming from the front. Is that normal?

@tirins 28 күн бұрын

Oh, I enjoyed the antiroll bar function explanation. Very well explained indeed, pace was excellent!

@ToTheGarage 23 күн бұрын

Thanks👍

@stevepateman Жыл бұрын

superb video. this bloke is a genius.

@TheZebbtab Жыл бұрын

Brilliant instruction and explanation. Thank you 🙏

@ToTheGarage Жыл бұрын

Thanks

@1justgo 5 ай бұрын

Great video with so much detail.

@ToTheGarage 5 ай бұрын

Thank you

@sherazali1066 Жыл бұрын

Finally I understand how they work🎉

@ToTheGarage Жыл бұрын

Glad it helped👍

@shaun.l4448 Жыл бұрын

What a top video...Great Man

@ip7590 11 ай бұрын

Great video

@kenmannagh7788 3 ай бұрын

One word ..EXCELLENT 🎉😊

@ToTheGarage 3 ай бұрын

Thank you so much 😀

@kthomas8968 2 ай бұрын

Brilliant video, thank you

@ToTheGarage 2 ай бұрын

Glad you enjoyed it

@StephenBishopNOMAD 2 ай бұрын

Excellent video ive got a 1997 E50 with the same knocking so i will check them I'm an old school mechanic so should be easy enough.

@ToTheGarage 2 ай бұрын

Easy job for anyone who knows their way around a toolbox Stephen👍

@samrichards8251 Жыл бұрын

Hi any idea what’s the next most likely culprit for the knocking sound? I replaced these and has helped but still quite a sound in the front. Will try the anti roll bar bush next

@davegrigg5477 2 жыл бұрын

Hi John sorry to go off topic but im currently stripping the rear hubs on my xkr2002 bearing set up is new to me any thoughts?

@wongerwonging8109 Жыл бұрын

Hello great channel, Ive really enjoyed watching all your Elgrand videos as ive recently purchased one, its a 2006 with 50000 miles, Ive found the ride to be very bumpy over pot holes (no knocking tho) so im fitting new rear shocks and front struts, ive replaced the rear shocks and had a little quick test drive, but its seems it hasnt made much difference on the rear, but really do need more of a test drive, just started to replace front struts and cant get either of the drop link nuts undone, top has rounded off already, so looks like im cutting them off, such fun lol. Yours came undone so easy I wasnt expecting this problem, my Elgrand glides over speed bumps very well, its just sharp pot holes causes bumpy ride with no knocking I can hear, how did you find your Elgrand drove regarding pot holes and shock absorbers? p.s I really like your garage, yours is a great channel and I like your style 😀

@TheeMisterspain Жыл бұрын

Probably the best video explanation on droplinks I've seen. My 2016 fiesta st has a knock and I'm changing these first. Ford droplinks are 55 each vs aftermarket ones around 15-20. In your experience is it best to stick with oem? That seems ridiculously pricey for drop links

@ToTheGarage Жыл бұрын

I would go for a known part supplier name/brand but would not feel the need to buy one ion a ford box. These are not complex components. TYpically just two ball joints seperated by the correct length of steel rod

@ukgardener973 5 ай бұрын

Thanks!

@ToTheGarage 5 ай бұрын

You are welcome

@danyo1972 Жыл бұрын

Nice info.

@ToTheGarage Жыл бұрын

Thanks danyo1972

@user-er3uf8ls5n Жыл бұрын

Thanks mate..

@staniley884 Жыл бұрын

I got the same problem and no any mechanic can find the problem for last 2 months ... i will try to change the drop links maybe helps .. finger cross thanks for the video

@titusmakale233 Ай бұрын

Great work . I think it's also known as stabiliser link

@ToTheGarage Ай бұрын

Yes, you are right

@rnjbailey2264 2 жыл бұрын

Lucid explanation, as usual, John! How does this situation compare with the XK8 ?

@ToTheGarage 2 жыл бұрын

VERY similar just with much shorter drop links and one end is just a bolt through a rubber bush rather than a ball joint

@aaronmaloney8 4 ай бұрын

I've just changed the anti roll bar links on my ford transit, took for test drive & one of the ball joints the rubber has come away , faulty part ?

@michellemcalpine4443 5 ай бұрын

Just had these replaced on my Honda CR V. Drop links??? Whhhaaaattchamean😢...this video is excellent! Thanks 😊

@ToTheGarage 5 ай бұрын

You are welcome

@rapinncapin123 Жыл бұрын

Wasup UK, I'm from the US

@rawros123 7 ай бұрын

That's pretty straight forward. Ive just been quoted just under £200 for my kia venga. If i did it myself, id save a fortune as eurocar parts do them for £20.49 each. But how do I lift my car up lol

@michaelpaterson8086 2 ай бұрын

Hi mate, Great video... what would cause a clonking sound when pulling away from a standstill forwards or backwards?

@ToTheGarage 2 ай бұрын

Drive shafts worn on a front wheel drive car or prop shaft joint wear on 4x4 or Rear wheel drive car. Loose wheel nuts. Excessive backlash in the differential. Worn engine mounts. Worn suspension bushes on the driven axle.

@thomasbutler5039 Жыл бұрын

This works a lot better if both front wheels are in the air, so there is no twist in the roll bar while changing the two sides.

@ToTheGarage Жыл бұрын

A good tip Thomas

@Punisher9419 2 жыл бұрын

I have a clunk on my XKR, I had the front drop links repalced so those are good. I think it comes from the rear end, not sure if it's shock foam mounts or rear sway bar drop links.

@ToTheGarage 2 жыл бұрын

Could be either but the lower shock mounting eyes have a reputation for becoming quite noisy as they age.

@xkr-mat 2 жыл бұрын

I also had a clunk on my jaguar xkr but was coming from the front. I just replaced the upper strut mounts and lower suspension bush and it was fine. However a few days later the noise comes back again from the other side. I'd recommend if it's the front or rear I'd have them done in pairs so it'll save you a trip to a garage again if you can afford. Can be done by yourself but depends on what you want to do with it

@Punisher9419 2 жыл бұрын

@@xkr-mat I do plan on doing an entire suspension refresh in a few years. Just replace everything that is a wear item.

@freddytait7726 Жыл бұрын

Rear anti roll bar brackets that fit hangers to bar

@freddytait7726 Жыл бұрын

I am looking for brackets

@AlamAhmad-ur8sq Жыл бұрын

I got my Toyota aygo do last year and now they gone again ?

@mikmik7033 Жыл бұрын

Excellent video what material is better Epdm rubber or pu

@ToTheGarage Жыл бұрын

EPDM rubber better for ride comfort and low road noise PU better for handling / accuracy of movement. I think i would go EPDM for anything road focused

@seanwallace1972 2 ай бұрын

That’s a great car lift you have can I ask where it was from please great vidoe

@ToTheGarage 2 ай бұрын

Made by Strongman. The model is Clifton

@stephencooke3721 2 жыл бұрын

Hi John, how can I contact you with to see whether you can help me with my electrical problems eg all the dash lights on even with no key in the ignition!

@ToTheGarage 2 жыл бұрын

Hi Stephen. Sounds like a relay has got stuck. I would just pull relays one at a time until I find the one that makes the lights go out. I would then swap it for another of the same spec. If the problem is gone then it was just a faulty relay. john@tothegarage.co.uk

@kgeddes7356 Жыл бұрын

Fantastic video! I had my Elgrand drop links replaced 12 000 miles/12 months ago and I am experiencing the same clonking sound again. Is it normal for them to wear out so soon? Thank you…

@ToTheGarage Жыл бұрын

They do wear them out quicker than most vehicles as the anti roll bar is VERY stiff to give such a tall vehicle such decent handling. And hence more force and wear on the drop links

@kgeddes7356 Жыл бұрын

@@ToTheGarage thank you

@user-uu6ju9lb1s 9 ай бұрын

I took of the nut on the top. Thenut on the bottom just keeps going around and it won't come apart of the top as it seems crooked

@sampagett5735 Жыл бұрын

Brill video

@ToTheGarage Жыл бұрын

Thanks

@ancientdiscoverys 2 ай бұрын

I have a metallic dangling noise that randomly happens when the road is uneven or on a small incline..has nothing to do with how fast I go . Any ideas guys !

@ToTheGarage 2 ай бұрын

I would guess that one of the heatsheilds has come loose. If you can provoke it into hapening while stationary by blipping the throttle then its likely that the core of your Catalytic converter has started to braeak down.

@ancientdiscoverys 2 ай бұрын

@@ToTheGarage ...got under the car shook everything.. nothing's loose. No noise..I tried stepping in the gas hard while In park and everything is fine..I'm stumped

@ramzscy 2 ай бұрын

Very informative. Do you accept car repair or its only your hobby?

@ToTheGarage 2 ай бұрын

Hi @ramzscy . No I just play with my cars and those of my friends and family. I Have a REAL job that is very demanding and would prevent me from being able to stick to any timeline promises for REAL customers😁.

@justice4g 2 жыл бұрын

I guess you can't check for movement without disconnecting them?

@ToTheGarage 2 жыл бұрын

OU would be incredibly lucky to detect movement without disconnecting at least one of the 4 ball joints. The car will typically always be fractionally out of level and therefore the joints will all be loaded up. So undo one and see what you can feel