watching this on my laptop, I wonder how my laptop is feeling.

You did pick one of the more complicated models to make this. The whole dv series is a pain comparatively. I probably would have called it quits if I had run into one before getting a few easier ones under my belt. Yet you were quick, (faster than me anyway). I really wish I had run into this video when I first started. Seeing you kinda just breeze through with confidence even when you hit a snag or two would have done me good. Everyone else seems to have practiced or something. After watching a few I thought I was ready. Then I'd get caught up somewhere or find something where it shouldnt be. Anyway I found myself half panicked thinking back on the videos and how they never seemed to run into anything unexpected. I knew I had screwed something up. I realize now that any of that was probably edited out. At least I hope so. I still don't get through one without as smoothly as most other video tutorials. Although I've learned now it's not the end if the world . Just calm down and figure it out. So more and more like your video here. Just wanted to comment and complement you on your video. It's more informative and more realistic than most. And you showed it when you had to go back becouse you missed a screw etc. Also admitting the intimidation factor and that it gets better. like I said wish I woulda ran across this along time ago.

Thank you very much for detailing this and for your organization tip! I was actually using the same type of tray to hold the screws, but I had never thought to label them like that (I always just sorted them by size). I would like to add for newer tinkerers that you do want to be careful what you touch and how. If you aren't careful you can short out parts with static electricty (It's useful to ground yourself frequently when working or wear an anti-static strap, especially in the drier winter months), or even the oils from your fingers can cause damage if left there over time. That's not to say that you should be horribly afraid of it every time you so much as pop a RAM stick out, just that you need to pay attention to what you're doing and avoid carelessly touching things you shouldn't.

WOW, Brian, thanks for this! It was AWESOME to see how quickly you disassembled that laptop! You certainly made the process a whole lot less intimidating! This video is very educational and informative! I look forward to seeing more of your videos! You just earned a new subscriber! :)

Dude, you rock! I have that model, and I watched the vid for that model, but now I'm doing my wife's Gateway, so I watched this. I have tinkered with PCs for years, but always shied away from laptops. No more. I have a lot more confidence going into them now. Love the tackle box screw holder! Keep up the great videos. They're helping a lot of us, especially those of us in Alaska. Thanks again!

2021: 👀 that's huge laptop

great video, im just about in ten mins to do my HP DV6 its got a Turion rm-75 and its HOTTTTTT i mean its like idel 68ish and over 95 at max. thats WITH a laptop cooler! so this helped greatly. the best laptop demo ive seen on the net.

Cheers for this Brian. Followed your excellent instructions and tips (the top one being "be patient"!) and fixed my Toshiba laptop. I like your style lad. No tech bullshit and very straight forward :)

Brian: This was a very helpful video! Thank you much!

Wow, didn't know about the magnetizing a screw driver bit. Thanks for the info and good vid!

@AlaskanPotHead - Hey waaayyy up there in Alaska! I think I am in the exact opposite place in the US! Glad it worked out for you! Thanks for the comment! I have always wanted to travel to Alaska, perhaps Ill run into you there!? LOL.

Trust me dude, some days I almost pull out the hammer. AKA "The Persuader"

Very nice video .Brian could you please make a video for dis-assembly of the lcd and how to disassemble the battery.

Brian, I'll bet you were hell when you were a little kid! Taking everything apart! At about 9 years of age, I remember taking a little tube radio apart (that is, what I could get out- hard wired with discrete parts). That was "a 100 years ago"!! Thanks, great video. I always learn from watching you.

This is so cool! Thanks Brian.

I feel ya. I lost one screw during the reaasemble. Couldn't find it. Wish I had a magnetic screw driver. Good instructional video. Liked & Subscribed.

Very GOOD PRESENTED BRIAN . I VERY MUCH APPRECIATE YOUR SHOW.

Now assemble it. ;D Great video!

I like that method of sorting screws,,,I used to work in a repair shop we fixed all sorts of stuff. I remember fixing VCR's and if you didn't put the screws back in the proper places bad things could happen.

That was remarkable Brian. Amazing in fact. I could never put all those bit and pieces together again LOL!! But then I'm 75 and my memory is 'screwed' if you'll pardon the pun. The demo was excellent. Many thanks ! Just 1 quick Q : is it possible to take the bottom (back) of the laptop off without removing all the smaller panels first ? Thanks and subscribed.

Very useful video Brian. Thank you.

Best tutorial, these awesome tips from a veteran helped me a lot (I mean A LOT). I repaired my overheating laptop (without any disassembly manual) I thought this was impossible, never have been I so wrong.. :) thanks Brian.

I wish I could do this ...but after watching your video two to three more times, I feel like I can. Great video by the way.

Thanks bryan for the tutorials..

Awesome! Glad it worked out!

I like it how u show to take it apart thanks that helps a lot!!

Well done, I was very pleased to watch your video. It will sure help to disassembly my DV6000. thnx, Metin.

Very good video and very helpful as well....I will continue to view other videos that you make in this area. Thanks for posting....

Thanks for this, really helpful and informative video !.

a really good video, very informative, and useful to me, thanks.

This helped me so much!!! Oh my god thank you!!!!

Thank you Brian for the job well done. But I noticed that you have touched the electronic circuits on the motherboard and the other electronic chips with your bare hands; however I learned in the past that this could result in a short circuit that might damage these electronic parts. Am I right or wrong?!

Interesting video. Thanks a lot, Brian. HOW ABOUT DISMANTLING A MOTHERBOARD, including all the transistors?

This was such a good Video great job. I need to put a mother board into my Alienware laptop any advice for dell products?

Great video sir. Sir, can you make dismantle video on HCL ME LAPTOP series because those laptops are out of the series and many computer mechanics are refusing to dismantle it. Thankyou.

very helpful , 😊 pls do laptop servicing tutorial for beginners .

Great tutorial! I have one of these laptops which I bought in 2008 and its still alive and kicking, though now it gets pretty damn hot in normal conditions, temps for the cpu hover close to 70c while under normal use. I'm thinking maybe its time to clean and reapply some thermal paste to the cpu? The thing must be all dried and cracked up so maybe its not making proper contact with the heatsink and just spreading the heat everywhere, I checked the fan and it doesn't seem clogged up with dust so thermal paste is my best guess. Do you think this is my best bet or just buy a new fan?

you sir deserve more subs.

Just stopped by to say Much Respect! Excellent computer repair videos. I bragged on you in one of my recent solutions. (Whoopee! I know. Just makes you sleep better at night, knowing that, huh? lol!)

Looking good!

nice video..hope you upload more videos on laptop repair...

Thanks for making this :3

Thanks for this video dude.

thank you for this video.It's made very careful

Thanks for the video

This helped me Replace a hard disk on a Hasee Laptop. So yeah Thanks!

Great video

Wow thanks sir this video is very well

managed to fix it.. thanks

great brian ty

Thank you so much

aesome video! very helpfull

@MrJojogreg - Will do, I am trying to do a couple a week! Thanks for commenting!

Thank you!

Nice vid Ty

PRO can really do it in 20 minutes with explaining which tools to use. I have a video on my channel that takes apart laptop in about 12 minutes. Good job man!

In my country you can only buy a good laptop so I bought an good laptop and your video helped me disassemble it and make a pc out of it☺

I just tried it but after I assembled it There were few pieces and few nails left. I think the PC has more nails for secondary use. But what happens to the remaining.

très bien fait bien expliquer nette je donne 10/10 et je dis merci

same cables connectors can be very sencitive :( can you show something about them? (i'm trying learn how disassemble a laptop. and these video is the best, because it's the laptop model that can give us so much work with it) thanks for all... realy thanks for sharing your tecnics and more (i'm portuguese)

Thanks my g

Best video, I'm on job training xD haha

hi, please help. I did this and broke the connector ofthe long yellowish plastic wrapped wire. possible if someone tell me the order of the ends (left to right) of how it goes into the connector? thanks.

Yeah, they don't make it easy to get to those do they! Worth it though!

Awesome

Another pro tip put a magnet in each of those container slots.

Thanks ! You help people all around the world : I'm from France ;) Do people give their old PCs for free or dead PCs for free do you think ? I thought about collecting some old PCs and make some new ones to sell.. Is it a good idea ? (I am still minor..)

My grandfather /still/ has the exact same laptop...I need to fix the optical drive.

I have looked everywhere for the right size phillips head screwdriver for laptops and can't seem to figure out which is the best size and finding a magnetized one is even harder any advise on where to get tools thank you.

Can i ask a question, about touching the Hard Drive or the RAM, is it safe for not damaging the RAM or Hard Drive by touching its contacts? i mean the PCB-like body of the device, thanks because my Teacher said not to touch the contacts/PCB of the RAM or Hard Disk, but i saw you touch em.

Do magnets come in handy LOL Intimidation tends to fade....Great stuff Just want to say, wow a tutorial that you can actually HEAR what the guy is saying...go figure. I need those little black tools- spudger. Should of 5 fingered from last job ;)

I took the exact same laptap apart you took apart, had to bring it in to get the shit refloated, damn thing heated up and never started until i got it refloated.

How do you fix a HP g7-1017cl? It is not at all the same especially the keyboard, it is one molded unit. There is not a top part to take off and the metal around the cd tray is not a philips, it looks like round holes!

I have a USB Port thats real loose And a Monitor light out. it hit floor. Is worth sendin thru repair shop? Or? I appreciate it much Thx

I just want my laptop's PLL. That's it. But nooo, it's nowhere to be found on the internet, so it looks like I'm gonna have to do the big job... DIY Tech , PLEASE tell me you happen to know the PLL for a Sony Vaio VGN FZ240E?

and the cabels you drag out can i replace them without its too hard

I got an old HP Presario and i gonna build it to an awsome gaming machine do you think thats possible???

I've tried dismantling mine, but there's one screw that's stripped and will not come out. I could just force the thing off but would probably end up breaking things in the process.

I am building a gaming computer, I am currently using a Toshiba Satellite C655, would i be able to use the RAM chip and hard drive?... I know a laptops ram chips are small but i checked the mother board and it has slots for it, any thoughts?

fine

I bought my HP Pavilion dv6-6047 cl entertainment PC in Nov. 2011 the fan started to make noise in May. 24 2014. I am retired tool and die Maker i have 26 Yrs of hands on experience i like to do my own work. i would like to replace the fan with factory orginal parts.HP.Brion you do very good work do you have any advice does anybody have advice God Bless..................

How to Disassemble any Laptop in Under 20 minutes: Acquire a hammer.

Mine doesn't have any panels on the bottom just screws so I am quite confused on how to dissemble it. It's a HP - 15.6" Touch-Screen Laptop - Intel Core i5.

Could I disassemble my laptop for its hard drive and DVD ROM and reuse them with another motherboard? I am going to build a gaming PC and are trying to save money on parts. :)

What part do i need to disconnect the monitor/lcd from the laptop completly so i could use my tv through hdmi as a monitor? I need to go into safe mode to remove a virus my laptop is an hp protectsmart. Plsss i need help right now!!!

Hey My laptop charging socket moved backwards can you please help

HP Laptops are the worst laptops for taking apart everything Sooooooooo time consuming and intimidating. The easy ones I find for dismantling are the Dells. Great video tutorial as always matey

I have Done this model about a 100 times

All I want to do is get the bracket aligned back where it should go. Everything still works reasonably well except the black on the screen is now a red-purple color instead. Things keep pointing to me having to dismantle the whole darned thing just to get it lined back up. (My laptop is HP Pavillion DV7. something)

I don’t think anyone will see this but my laptop cover is broke on the corner and I wanted to know if anyone here thinks it would be a good idea to reproduce that corner or the entire cover in glass fiber or resin, or maybe in 3D printing as well but that would be a bit overkill. I can’t find the cover literally anywhere. I don’t live in US so I can’t get it on eBay or Craigslist. I’ve been searching for months and no one in my country sells it, and my mom doesn’t let me buy things from outside. So what do you guys think?

I just need to clean my fan would I have to do all this?

Pls help.i have here nextbook laptop but dont have brand name and model, I dont see any words written outside or any corner pls help. Where can i find the brand and model cause its not there. Pls

i want a job in laptop so how can i dismental or assemble any laptop easily

these screws near the cpu that you used the pliers to remove....oh god they fucked me up when i tried to open up mine

Prying is the scariest part...

@chushui - LOL! We can rebuild him!

My HP DV6000 doesn't start at all even with the battery in, but the blue light where the power cord is plugged into flashes every 2 seconds, what could be the problem??

how i can learn to do that

wow

A magnetized tip huh