How To Dismount And Mount lawn Mower Tire With Hand Tools

Рет қаралды 657,375

11 жыл бұрын

www.amazon.com/shop/influence... www.handymanpf.com
Check out the newer video with a HarborFreight Mini Tire Changer
• How to change A Lawn M...
This video explains the process I use to change a lawn mower tire with a couple of pry bars. I am demonstrating on My Cub Cadet RZT 50 front castor tire. It is a struggle to do it this way, I have only done three of these and do not have a systematic way of doing this, YET. I will post other videos of different and more efficient ways of changing these tires. I hope this video helps you out on your task. This video is a tutorial on how I do this task for your viewing pleasure. Thanks for watching and Please comment below.
If the video helped you please hit the like button and always please share.
Please Help support this channel VIA PayPal So I can continue to improve and make quality videos and make product reviews to help save you or someone else time and money. goo.gl/KUwgNi Please help fund for future how to videos and reviews. Every little bit helps. Thank you / handymanpf Handyman Problem Fixer
@handymanproblemfixer #handymanproblemfixer #handyman @handyman

Пікірлер: 285

@sbhassan1 8 жыл бұрын

+handy man agree with you about making do with the tools on hand, when you just got to get it done. I watched your video, with pauses in between to do what you were doing on my own tractor tire, and it got done. Only thing I changed was I used tire spoons instead of crowbars and tire lube instead of motor oil. Thank you for making this video. To all those who disagree, I say watch another video if you want to do it differently, or take it to a tire shop. This method may take a little sweat, but don't give this man grief. His method worked for me.

@4oasislawncare 3 жыл бұрын

I don't understand haters for a man who is only trying to help others. Thanks for your video Handyman

@blair3b 11 жыл бұрын

I really meant not to take offense... live an learn. To be honest, it confirmed for me that it is possible, and I went right out and did it successfully. Admittedly it turned out I could get the wheel and tire together for not much more than only the tire, so I never remounted a tire to the old wheel. I appreciate you took the effort, and it was helpful, but what was most entertaining was that it really looked like me trying it. You're a good guy.

@lauraspeaceful 9 жыл бұрын

Super!!! My husband couldn't have done this repair himself had I not found your video!!! Thank you.

@stephendall2329 3 жыл бұрын

Glad to see someone gets to change a tire that has the same attitude as the one I am fighting. And not a single ‘bleep-bleep’ 🤐

@guaporubio 2 жыл бұрын

Very helpful. Thanks for posting this video. I got the tire off but was struggling to mount the new one. This should help. I'm going to try it now.

@RaOuLwtf 8 жыл бұрын

That ratchet strap trick was very helpful! My snowblower tire popped its bead when I was backing it into the shed and missed the ramp. Using a ratchet strap I was able to get the tire bead re-seated. Thanks for the video.

@handymanPF 8 жыл бұрын

My pleasure, I m glad it helped. Thanks for commenting, I greatly appreciate it. Please like, share, and subscribe. Also like to wish you a happy new year.

@jpratt53 2 жыл бұрын

The kneeling on it and transmission fluid did the trick for me. Thanks

@handymanPF 2 жыл бұрын

I’m glad it helped out. Thanks for watching and commenting. I greatly appreciate it.

@easyrider4649 10 жыл бұрын

Thanks Handyman.. I just replace my tire on my lawn mower. Couldnt have done it without watching your video...

@handymanPF 10 жыл бұрын

Thank you for the great review. Glad it helped out, that is my goal. Thanks for watching.

@hitech98 2 жыл бұрын

awesome video. Not 1 tire store in NOLA mounts lawnmower tires. I used a little soapy water and had both tires mounted in 10 mins. Thank you!

@handymanPF 2 жыл бұрын

No problem, I’m glad you found this video useful regardless of how horribly made it was haha. Thanks for watching and commenting. Please like share and subscribe

@justin14120 5 жыл бұрын

I had one of my workers look up how to fix the lawn mower tire and she watched this video and was able to get the tire back on the rim within minutes. Thanks for the video to help.

@handymanPF 5 жыл бұрын

Thanks for watching and commenting, it is always appreciated. I’m glad it helped out. Please like share and subscribe.

@stevehess65 Жыл бұрын

Wow that looked easy 😃

@sandyanderson6313 9 жыл бұрын

2;22 make sure the bead is fully down in the rim gives it more space to flip off, good video!!!!!

@Imnotired 3 жыл бұрын

A ratcheting cargo strap was exactly what I needed. Thanks for the tip.

@kennethwheeler8348 6 жыл бұрын

Big help for some one who has never mounted a tire before. Thanks.

@handymanPF 6 жыл бұрын

+kenneth Wheeler great, I am glad you found it helpful. Thanks for watching and commenting. Please like share and subscribe.

@immrnoidall 10 жыл бұрын

here is the secret USE A COUPLE OF VISE GRIPS ON THE RIM. the tire will always try to slide back on to where you started .clamp the vise grips onto the rim to keep it from doing that.this apply's to getting it back on the rim

@immrnoidall 10 жыл бұрын

don't bother trying this if you got 5-10 bucks ,the tire shop will do it right first time.and in about 10 minutes.

@BigdaddiZ 4 жыл бұрын

Good tip just used it today and the vise grips helped me tremendously

@hitech98 2 жыл бұрын

hey man that's what your knees are for!

@immrnoidall 2 жыл бұрын

@@hitech98Now that I'm almost 60, I found out the garage does it really really cheap. I will never fuck with another tire.

@gomeztimothy11 2 жыл бұрын

Small C clamps work in the manner as well

@philaciousnessicity 9 жыл бұрын

Thanks, bud, I learned quite a bit. It's been 20+ years since I've had to change a tire from the rim.

@midnightrunner684 6 жыл бұрын

That tire kicks ass

@DJtheDad 8 жыл бұрын

I like this video. Very simple, honest & candid. Its exactly how I'd expect it to go in real life.

@handymanPF 8 жыл бұрын

Thanks. This video was an experiment, without any editing. I did it to give everyone a good idea what to expect. I did struggle with this one, as you can see. Also I should of used large screw drivers and not pry bars. Thanks for watching and commenting. Please like, share and subscribe. It is very much appreciated.

@freeze-flame2447 8 жыл бұрын

THANKYOU!!!!!!so much handy man. It saved my dad from turning green and throwing the mower tire like a baseball

@handymanPF 8 жыл бұрын

Haha. No problem , glad it could help. Thanks for the comment. I greatly appreciate it.

@tomnix1941 2 жыл бұрын

Thanks..I am fighting the exact same way you are but the job DOES get done and with simple tools..Great video..

@handymanPF 2 жыл бұрын

Thank you and I greatly appreciate your comment.

@xxPsychorabbitxx 10 жыл бұрын

Wish I had watched this before I tried figuring out taking the tire off myself. Might have saved me some trouble. Getting it back on was impossible though. This video has given me some good tips.

@ubeenlookingforthis 7 жыл бұрын

Thanks Handy Man.... I just watched two vids and they had tires that were so soft and pliable you could roll them on with your hands..... I have been struggling with this F'n tire for a 1/2 an hour and that's why I'm here, not to see a easy one, I want one with hard side walls like you had. I see I need a lot bigger pry bar than the little light assed screw driver I was using.......... I am armed with a couple of short crow bars now and ready to go back and do battle........ Thanks for a realistic vid

@ubeenlookingforthis 7 жыл бұрын

Handy...... The Key was the knee on the tire to keep it from walking off as I pried the other side. Thanks again for working just like we are on a garage floor with a big hammer LOLOLO

@allanjohanson8538 8 жыл бұрын

Dave C: Your advice to keep the opposite side of the tire close to the hub did the trick. Many thanks.

@handymanPF 8 жыл бұрын

Glad it worked out. Thanks for watching and commenting. Please like , share, and subscribe.

@katrinavilleresident1068 8 жыл бұрын

Appreciate the visualization of the process. Like life, everybody has their own opinions. Sure there could have been improvements, but you showed the process and we can add our own twists to the solution. Thank you very much for taking the time to make and post the video.

@handymanPF 8 жыл бұрын

+Katrinaville Resident point well taken and I agree. Not only that I have made an additional video on how to perform the same task, the link is in the description. Thanks for watching, please like, share, and subscribe.

@bruceroberts2269 8 жыл бұрын

That "strap method" is an awesome idea ..... I had been struggling getting air into it ... and could get an air seal ... that strap technique worked !!! THANKS !!!

@handymanPF 8 жыл бұрын

Glad it helped. Thanks for commenting, I greatly appreciate it.

@chevyliebling 11 жыл бұрын

Excellent! It worked the first time, many thanks. I used 10W40 motor oil because I didn't have any transmission fluid handy and that worked just fine and I also used a hand air pump, like the kind you use for bicycles. I heard a slow leak of air from the bead so I kept pumping air in faster and faster and POP! it sealed. The strap is what saved the day though.

@jimshirley7613 10 жыл бұрын

This is one of the funniest demos I've ever seen!

@handymanPF 10 жыл бұрын

Thanks. This was an experimental video I did to teach and entertain at the same time to try to keep everyone's attention.

@chcot 11 жыл бұрын

Good job if you ask me! I love to watch a man with tenacity stick with and complete a task.

@richardkocis5273 4 жыл бұрын

very helpful got my 4.10/3.50-4 back on, trany fluid did most of the work Thanks

@handymanPF 4 жыл бұрын

I’m glad it helped. Thanks for watching and commenting. Please like share and subscribe. It helps get these videos out there to help others when you hit that like and subscribe. Thanks again.

@jankiestick69 8 жыл бұрын

New sub! I've changed several tires in the past using roughly the same tools you did, but I never thought of using a strap to mount the bead. I've always struggled with that. Great idea and thanks!!!

@timothygum1588 Жыл бұрын

6th

@tomkatseven 7 жыл бұрын

Good vid,good use of every day tool around the house,cool music. Thanks

@handymanPF 7 жыл бұрын

Thank you very much. I greatly appreciate your comment. Thanks for watching . Please like , share, and subscribe.

@mr.t7714 9 жыл бұрын

Very informative thanks I'm actually taking off a four wheeler tire same dif

@BlackSeranna 8 жыл бұрын

Thanks a lot, I hit my mower on something and the tire came off. I didn't know what I was supposed to do, so you've really helped me.

@handymanPF 8 жыл бұрын

BlackSeranna I am glad it helped. Thanks for the comment and thanks for watching.

@cicad2007 10 жыл бұрын

Nice video. Reminds me of the time I had to change (wrestle with) my tires. One tip: A long, self-tapping bold with washers on top screwed into your work bench will hold the hub steady while you change the tire. Much more convenient! If you're worried about damaging the inside of the axle race, just put a copper or plastic tube around the bolt. An old piece of water hose works fine.

@namvette68 2 жыл бұрын

A 5/8" rod is all you need. a 3/4" if you have the bigger axle. I change tries on a semi faster.

@handymanPF 11 жыл бұрын

Thanks. I m glad it helped out.

@GingerSoCrazy 7 жыл бұрын

worked like a charm thank you

@Drumguitarman 7 жыл бұрын

Nice honest mans video. Well done. Screw negative comments,. but the positive comments, helped me come to a better conclusion. But you lad, got the ball rolling. Again, well done!!!

@handymanPF 7 жыл бұрын

+David Robinson thanks buddy. Thanks for watching and commenting. Please like share and subscribe.

@mariosolari7921 8 жыл бұрын

THANK YOU! worked just like you showed us on the video

@handymanPF 8 жыл бұрын

I m glad it helped. Thanks for watching and thanks for commenting. I greatly appreciate it.

@aNuthaRedneck 9 жыл бұрын

My cousin owned a tire store and was one of the few in the area who would change lawn mower tires. The method he used is much like yours but he made it much easier by putting a rod in a vise to hold the rim steady like an axle while working then he could use leverage against the rod or use two tire tools in opposing directions to hold tire and pull it off the rim. It took him maybe 5 minutes to remove, replace, and put air in a tire.

@handymanPF 9 жыл бұрын

Yeah, that rod in the vise to hold down the tire makes a heck of a difference. I have a video to be released of that similar process. This video is made showing the complete manual process of it, just in case someone doesn't have a vice or any other type of hold down available. Thanks for watching and commenting.

@stevenreeves4766 Жыл бұрын

haha, this made me laugh so hard. if it was that easy we would not be here trying to figure out how to do it. my tires are so much harder on the sidewall they will not come off that easy.

@spkendrick 6 жыл бұрын

I needed this video

@thejasonkellett 6 жыл бұрын

Lawnmower tires....the unexpected battle!

@paulmiller4902 10 жыл бұрын

Me. Thanks for the tips it did help if I can i found one the hard way. I was unable to get a rear tire inflated with a strap like u used in the center I put a strap near outer edge of inside part of tire it really worked well, considering I wasted about a hour using one strap in middle check it out.

@houndsmanone4563 5 жыл бұрын

Nice job. Enjoyed the video.

@handymanPF 5 жыл бұрын

Thanks, I greatly appreciate your comment. I’m glad you liked it. Thanks for watching. Please like share and subscribe

@houndsmanone4563 5 жыл бұрын

@@handymanPF I just did subscribed and hit the bell too.

@handymanPF 5 жыл бұрын

Thanks. And great , I really appreciate it very much. 👍👍👍

@cornwasher 5 жыл бұрын

Your experience mirrors mine with small tires. I just gave up and took to Les Schawb and they did it for free....

@handymanPF 5 жыл бұрын

I would have to disagree. I am not one to give up. I have always been a go getter and always look to improve and find solutions for problems. Thanks for watching and commenting. Please like share and subscribe.

@BrooklynAvenue 9 жыл бұрын

This was smart! Thank you!

@handymanPF 9 жыл бұрын

Glad it helped. Thank you for the comment.

@ralphstadler429 5 жыл бұрын

Using little C clamps or vise grips helps a lot

@alfnee1244 9 жыл бұрын

awesome! the strap was what I need to do on my tyre...thanks

@handymanPF 9 жыл бұрын

Thanks for the comment. Glad it helped.

@paulk8444 8 жыл бұрын

I appreciate the simplicity of using every day tools we almost all have in garage and strap was a great idea and choice of either oil or dish soap as I used soap but oil will help lube the tire and keep an old one on better then soap drying up and then same problem. hardest part for me was getting tire off the tractor as previous person did nit use antisieze on shaft o it got stuck and pain to remove to then get to point of removing tire. Thanks for helpful tricks

@handymanPF 8 жыл бұрын

+paul kusbach I am glad you liked it. Thanks for commenting. Please like, share and subscribe.

@QQTrick1QQ 7 жыл бұрын

That ratchet strap also works great for holding the tire to the rim mounting the second side, get a piece of the tire under the lip of the rim then run the tail of the strap through the axle hole then around the tire into the ratchet tightening the rim to the tire this way you wont have to chase the tire, rope also works for this if you don't want your strap greasy.

@duanefroman6591 9 жыл бұрын

Good job man

@RussLSmith 11 жыл бұрын

You walk it off with 2 flat blade screw drivers I watched several videos because I have fought with mower tires in the past and realized there had to be an easier way. I easily removed 3 tires using regular screwdrivers, after struggling with large pry bars and broke the steel bead on a 6" front tire fighting with it. I mounted the rotten tires using tubes and they work fine. One had a hole in the sidewall from dry-rot, but it holds 14 psi and I'm mowing.

@duncang55 6 жыл бұрын

Boo to all the negative comments. While I see some of their points, the ones about "not using what you have lying around" or "take it to the shop" probably live in the burbs and can just hop in their little sedans to the tire store. Some of us live far enough out that, under the circumstances, it's not trivial to just "run to the tire store". If one doesn't happen to have a tire changer, you make do with what you have. Stop being so self-righteous. It's an honest video about how I totally expect this gig to go. (I have a couple 14" trailer tires to do). Thanks for the vid, man!

@handymanPF 6 жыл бұрын

+duncang55 thanks bud. I greatly appreciate you taking the time to write this comment. Thanks for watching. Please like share and subscribe.

@helenward3108 9 жыл бұрын

Thanks very useful demo

@handymanPF 9 жыл бұрын

Helen Ward Glad it helped and Thanks for the comment. I have another video similar to this one with a much easier process kzfaq.info/get/bejne/f5qDdtFk1djUfGw.html

@godisplay 8 жыл бұрын

Good job. I don't know why some jerks are criticizing you. If they have a better way, they should post their own videos.

@handymanPF 8 жыл бұрын

Thank you. I don't know either why they do, but I don't let it bother me. Sometimes I think they do it to start an argument or are just unhappy with their life. I don't know really. But I do greatly appreciate your comment. Thanks for watching. Please like, share, and subscribe.

@Anonymous-nc3vd 4 жыл бұрын

You must know him...

@mountainhollow 9 жыл бұрын

That was great.

@chrisrichardson4899 7 жыл бұрын

Thanks, went to use my lawn mower and one tire was flat and off the bead, was having a hard time getting it to take air, your trick solved it

@handymanPF 7 жыл бұрын

+Chris Richardson I'm glad it was useful. I appreciate your commenting. Thanks for watching and commenting. Please like share and subscribe

@CRDODGE47 7 жыл бұрын

a large c clamp for breaking the bead also keeps tire in center of rim as you take tires spoon and screw driver to pry off the tire

@jeffreed8425 4 жыл бұрын

I'm doing this for my old man right now. It seems like a great idea. I will give it one more go. It would seem that I am too aggressive and impatient.

@dwb1982a 7 жыл бұрын

thx sir !!i got lots of help from you video ,thx very much !!!!!!!!!!!!!

@handymanPF 7 жыл бұрын

+文文 great. I m glad you found this video helpful. Thanks for watching and commenting. Please like, share, and subscribe.

@ggsmith099 8 жыл бұрын

almost know how to do it but you didn't give up way to go !

@handymanPF 8 жыл бұрын

Good job. Glad you could do it.

@gomeztimothy11 2 жыл бұрын

For additional ease use anything small enough in diameter to insert into/through the hub( pipe, treaded rod with nut and washer) preferably on a vice, for leverage and ease, to rotate around the tire bead using a long bar, tire spoon, or screwdriver, mimicking an actual tire removal tool/machine. A tire iron with a hole, or square slot in the middle and a spade end works nice. The wrench end which is smooth and round and the same motion aids in mounting the tire.

@MrTravis769 8 жыл бұрын

you have a lot to learn about removing a lawnmower tire it took you 10 times what it would have taken me

@handymanPF 8 жыл бұрын

Check out an updated video I have done. You can find a link that I posted the comment section, I do it in about 5 minutes. I wander about everyone who states that they can do it better then I can, then why watch the video if you already know how. I post these videos to help people who don't know how and show them how I do things so that they have a reference point. Regardless thanks for watching and commenting.

@butterflywing61 6 жыл бұрын

great thnx for the help

@handymanPF 6 жыл бұрын

I’m glad you found it helpful. Thanks for watching and commenting. Please like share and subscribe.

@claudb1029 6 жыл бұрын

Also, the wheels on my hand truck are the type used on very old cars-a slit rim. To remove the tire and tube there are four bolts that you might mistake for wheel mounting lugs. When you take out the four bolts the wheel splits into a left and a right side. Done-the tire and the tube are no longer on the rim.

@davec5435 9 жыл бұрын

The TRICK is to push the opposite edge of the tire down to the narrowest part of the rim, i.e. the hub, and NOT to leave it up against the rim where its widest. That way you'll get all the room you need and enough slack to slip the last edge over the rim

@AHill-oi9ct 4 жыл бұрын

Wasn't so bad. I managed it with a big screwdriver, a wrecking bar (as my uncle calls it), a big open ended wrench, and some vice grips. Only have good use of one arm, so there were knees and anything else I could use involved. Glad there's no video record of it. It was ugly

@c182SkylaneRG 4 жыл бұрын

If I don't have transmission fluid on hand, what would be the next best substitute? I'm trying to reinflate a tractor tire that deflated over the winter, so I'm trying to inflate it in place with a bicycle pump (speaking of making due with what you've got :) ). Your video is the first one that mentioned a liquid lube/sealant to keep the air in until the tire's inflated, so that's a very good tidbit. I've got motor oil, dish soap, hand soap, and various lotions... Thank you!

@handymanPF 4 жыл бұрын

You can try a soapy water solution .

@erikcotten910 5 жыл бұрын

two important things should be considered to make sure that this goes better: First you should probably replace the rubber valve stem any time you change a tire. They are typically old and brittle and will be your next failure. Second, if you remove the inner part of the valve stem when you are inflating the tire, you will get a lot more volume and will decrease the need for the strap process. Once you get the bead seated, you can reinstall the valve stem innerds and inflate to the proper PSI/BAR.

@jimmyschmidt14 4 ай бұрын

@sandyanderson6313 9 жыл бұрын

We would love the old tire for our go karts HA HA ,,

@Pcr810 8 жыл бұрын

Well done. I had no idea how to seat a tire after it looses its bead. Most guys doing video talk more that show actual work. You got right to it. Thanks for doing this video!

@handymanPF 8 жыл бұрын

+Scott W I'm glad you liked it and found it helpful. I greatly appreciate your comment. Please like, share, and subscribe.

@x-man5056 5 жыл бұрын

It's a little like making sausage. Sometimes it makes you wince but the end result is what counts.

@handymanPF 5 жыл бұрын

Yes, haha. This was an experimental video with very little edits. I made it a couple years ago. Thanks for watching and commenting. Please like share and subscribe.

@nicolezucchi6216 8 жыл бұрын

great music!

@handymanPF 8 жыл бұрын

Thank you. I appreciate your comment very much, I made the short music piece myself.

@1990pommie 8 жыл бұрын

good reminder. quite diff from when I used to use spoons and forks to remove tyres from my bicycle. only down side my mobility scooter has inner tube. other than that this clip helps

@handymanPF 8 жыл бұрын

Great. Thanks for watching and thanks for the comment.

@claudb1029 6 жыл бұрын

SUGGESTION-rather than using screwdrivers, i would use the handle of an adjustable wrench or a pair of pliers. Far more rounded and les likely to put a hole in the NEW tube. Also, I would run my hand around inside the tire. Something punctured the old tube a nail, glass etc-it likely is stuill their reday to puncture your new tube. Also, I would apply baby powder to both the tire inside and the new tube. It acts as a lubricant and makes it far easier for the new tube to slide into position.

@Scotty32355 9 жыл бұрын

Soapy water or grease on bead helps

@terrysingleton1018 7 жыл бұрын

Putting soapy water over the bead of the tire helps it over the rim.

@OSOGRIZZLEY5879 10 жыл бұрын

sweet

@nathenielclark3542 7 жыл бұрын

dude your f#cking awesome

@handymanPF 7 жыл бұрын

+Natheniel Clark haha , thanks

@1fanger 10 жыл бұрын

You need 2 or 3 large screw drivers, long nose Vise Grips. a squirt bottle w/ 50/50 mix Simple Green and water and an assortment of wood blocks- 4x4`s work good for me.. Most times, if you buy quality tires you don`t need a tie down but, it is good to have. Don`t forget to clean the rim bead.

@MajorHorstPower 9 жыл бұрын

It's good to pull the valve out of the stem before filling it with air the first time. Helps to pop the beads onto the rim.

@maynard666 10 жыл бұрын

Try dish soap instead of oil or transmission fluid. It's not as messy and may make the tires easier to inflate.

@martinschaffmeir7729 6 жыл бұрын

The hardest thing I've ever done was a putting on a high speed 4.80/4.00 -8 tire 4 plies. They come off ok but I takes two guys to get them back on with out some kind of tire machine

@handymanPF 10 жыл бұрын

I dont like to use dish soap because it crystallizes, the tire shops use a wax type soap which doesnt make metal rust or aluminum oxidize. I have used dish soap and it is less messy but i have ran into problem with it in the long run occasionally. Thanks for watching and comments are always welcomed on my page.

@gocolts82 9 жыл бұрын

I'm frugal but for only 5 bucks a tire I'd pay to have it done quick and correct at a tire center.

@handymanPF 9 жыл бұрын

Herb Stimple This video you just watched is without any special tools, just pry bars, but big screw drivers work best. But dont get me wrong there was nothing wrong with the tire after installation. But if you can get someone to install one for 5 bucks, great.But if you want to do it an easier way check out this video kzfaq.info/get/bejne/f5qDdtFk1djUfGw.html . Thanks for your comment and thanks for watching.

@brucewiles4130 8 жыл бұрын

sir,,,next time as you install tire use a 8 or 10 inch vice grip lightly clamp the rim and the tire want walk with you.

@jerrytrue4730 10 жыл бұрын

Dude try using flat head screwdrivers also they work alot easier.

@handymanPF 10 жыл бұрын

Already has been mentioned bud. Thanks, this video was to teach and entertain at the same time.

@meddig 10 жыл бұрын

Uhhh..wow

@GG-hx8ek 9 жыл бұрын

Nice...

@StanfordMack-le6cg 9 ай бұрын

What size is my lawn mower? Are numbers on mower inches?

@rickyhildebrand114 7 жыл бұрын

A little lubricant (Soapy water) go's a long way....lol.. That space in the middle of the rim is called "The Drop In"

@markspain1365 8 жыл бұрын

I would love to know what size that tire is. I have a 11x4.10-5 tire I am trying to get off the rim and I have tried screw drives, tire irons and pry bars and nothing seems to give me a break. I have used oil and dish soap, still no joy. Short of cutting the tire off, I've given up on it. I have a zero turn mower with a caster tire with no tread; could this be different than the type of tire you have? Obviously it is but general make up, mine seems very rigid and not very playable. Thoughts?

@handymanPF 8 жыл бұрын

The tire might be foam filled and need to be cut off. I don't really know unless I see it. Sometimes people get them foam filled so they don't have to put air in them and they last a long time. I hope this helps. Thanks for watching please like, share, and subscribe.

@handymanPF 8 жыл бұрын

Btw, I don't remember the tire size that was done here.

@howieloso 7 жыл бұрын

would soaking tire in hot water help with putting on new tire...soften rubber?

@handymanPF 7 жыл бұрын

+Howie Loso it would have to be really hot. You could just leave it in the blazing sun, this time of year. But if you get it warm enough , it will work much easier. Hope this helps. Thanks for watching. Please like, share, and subscribe.

@TexasHarleyBoy65 6 жыл бұрын

1 ticket for the Struggle Bus, please.....

@adnelg319 9 жыл бұрын

Hi, I’m doing a project for my engineering class and was wondering if anyone could please answer a few questions for our survey. Do you live in or have you considered living in a house with multiple floors? If you were to move, how many boxes do you think you could carry at a time? Do you own a hand truck or a dolly? If yes, can you easily maneuver these up a flight of stairs? Would you be willing to pay more for a dolly that moves more easily up and down stairs than a regular dolly?

@handymanPF 11 жыл бұрын

It was my first time doing a tire that size. Plus this video was an experiment of recording the whole process, I did not edit this video because i had a request on an earlier project to record the whole situation and problems that i ran into. But I do plan on remaking this video. I m also going to leave this video up for the attention it draws. Regardless, thanks for watching.

@randysmith6385 10 жыл бұрын

Ok video ,getting tire on couldn't happen for me so Olof to tire shop

@turnerbend 8 жыл бұрын

I think it is safe to say that Handyman don't know what he's doing

@realruggeddiy 6 жыл бұрын

This is what I looked like tonight, except it took way longer and I was swearing. Not fun!

@DennisCLatham 6 жыл бұрын

BWHAHHHAHAAH !!! This is just the way - NOT TO DO IT ... LOL

@TheBeast1911 5 жыл бұрын

I tried putting the tire back on after patching it, gave up drank a few beers now in here. I swear car tires are easy compaired to these small Tractor tires

@tomstewart1218 2 жыл бұрын

Need to fast foward a little. Took a simple task and turned it into a 20 minute project.

@chisholmranch1 8 жыл бұрын

You made it too easy.

@phillipdavis5241 6 жыл бұрын

Changing a tire on a mower is easy, all you need is 360 crowbars

@thedo0k 9 жыл бұрын

"Proceed with finesse". Then maul the shit out of it! Lol. Joking. Nice vid

@handymanPF 9 жыл бұрын

That's right. Lol thanks for watching and commenting.

@handymanPF 11 жыл бұрын

What would you rather me do to make this video less painful for you???? I try record the whole task so people can see what i am doing and what i am going though without cutting anything out, so they get a good idea what they are facing and find a better way to go about it. If you have a better way, we would all be glad for you to post a video response on how you do it, I would be more than glad to accept it.Regardless Thanks for watching and also thanks for your opinion.

@greghostetler8613 5 жыл бұрын

13 minutes seemed like a long time until I did it myself. Thank you for posting this and not editing it to make it look effortless. A time for a brief celebration when mine finally beaded up! Much respect Handy Man!