Would depend. Using #1 southern pine. Or # 2 pine like from Menards. # 3 concrete piers in a cardboard Sonen tube or #4 Diamond piers at $144.00 a piece. Wood would be $6000.00 to $11000. Including hardware. Diamond, or Handi piers anoit $144.00 per unit. Just put a deck in for a.43x23 pool. 8foot all the way around for one.

Thank you for reaching out to us. Different municipalities have different regulations regarding electrical wiring and lighting around pools and spas. The allowable distances may be both vertically and horizontally, depending upon the municipality. You would need to consult with your municipality in building department for the regulations in their area. We are unable to assist beyond referring you to your municipality. If you have further questions please let us know and will will help if we are able. Trex Customer Care 1-800-289-8739

Hello Todd, We would recommend reaching out to a local pool retailer to assist with cover application recommendations. If you have any other questions, please give us a call at 1.800.289.8739.- Thank you, Trex Customer Care

Hello Matt, the color used in this video is Coastal Bluff. If you have any other question , please feel free to give us a call at 1.800.289.8739. -Thank you, Trex Customer Care

The cost of a Trex deck typically runs from $9 to $16 per square foot. Of course, that depends on where you're buying it, and how much you’re purchasing. Pressure-treated lumber prices will vary depending on your local market. Please reach out to a Trex dealer in your area for pricing information. You can also give us a call at 800.289.8739 if you have additional questions. Happy building! - Trex Customer Care Team

The deck goes under the pool....the pool cover goes over the pool

Thank you! We are glad you enjoy it. - Trex customer care

Hi Angel! The post was cut so that the beam coming into the post was at a 12 degree angle to the other post. The beam material was set on top of the posts and marked to determine where the post needed to be cut. This ended up being a 12 degree angle in this instance. A circular saw was then used and set at an angle, cut down the line. Then the cut was finished with a jig saw as the circular saw did not cut deep enough. The angle cut was repeated on the other side of the post so that the two beams met in the middle of the post. - Trex Customer Care

I have reached out to see if I can get access to those blue prints for you. If you would like to send us a private message with you contact information we will gladly share that information with you if we are able to get it.

@@TheTrexCo not sure if I can send a private message on KZfaq but if you have an email that I can send my info to, I would definitely be interested ion those plans for this deck.

Absolutely. You can Email customersupport@trex.com.

Hi Alisha. Using a speed square, on the corner of the post, find the angle and divide by two to get the angle for each member at that intersection (if unfamiliar with the many uses of a speed square there are some great videos on the subject on KZfaq). Another method is to set the beams on top of the post and scribe/transfer the inside and outside edges of the beam onto the post. Place a block of wood over the intersection of the beams so that it’s square with the back of the post and mark the beam on both sides of the block. That’s your angle to cut the beam ends. Once you’ve cut the beams, set them back onto the post and trace the beams in your desired location. This will be where you’ll notch the post. Kindly, Trex Customer Care

Yeah, that is a bit out there, I am in progress of a $2k deck for a $488 Walmart special 18' pool. I can't afford all the bells this video shows such as the sides, the beautiful hand rails and deck post covers but the trex flooring is a must have feature to keep the feet safe from regular wood decking wear and weather breakdowns.

yeah, I spent two years overseas with the military and found with no codes the work is funny too as well as dangerous and full of sh$2t.

sounds like Homer Simpson built the deck for them, and Homer was not a registered contractor.

What’s wrong with that