Kim, I so appreciate all your videos on the Janome machines! It has been so helpful with my 9400, which I love.
@conqueringmountscrapmorewi25093 жыл бұрын
Such a great sewing machine! Thank you for posting!
@Chatterboxquilts3 жыл бұрын
You are so welcome!
@jennifergoodwin86803 жыл бұрын
Thanks Kim. This is definitely useful information. I love the look of a well done blanket stitch.
@Chatterboxquilts3 жыл бұрын
You are so welcome!
@krisgraef32303 жыл бұрын
Extremely helpful, as I just bought my M7 2wks ago. It is fun learning the new tricks. Thank you!
@Chatterboxquilts3 жыл бұрын
Glad it was helpful!
@doreensherk2873 жыл бұрын
Good info, thank you
@Chatterboxquilts3 жыл бұрын
Glad it was helpful!
@kathybristow43512 жыл бұрын
Thank you for the helpful instructions.. they are so helpful. Question: why is the stitch lock button always on?
@Chatterboxquilts2 жыл бұрын
While the button is lit, it is not always activated - you have to press it and it will flash to show you that it will stick several locking stitches. There are some stitches that automatically start with a locking stitch so perhaps this is why it is "on".
@cindybundrick34692 жыл бұрын
Very helpful! Can’t get the foot to go down and stitch.
@jeanperren60946 ай бұрын
Does what you have shown us on the M7 differ much if the machine used is the MC9400? Do the same principles apply? I am using the blanket stitch to appliqué and I was researching how to improve my results as I’m not confident with the process. Thanks for reading my question.
@Chatterboxquilts6 ай бұрын
It is similar as there is also a blanket stitch on many of the Janome sewing machines.
@HunterDeuling3 жыл бұрын
Question: what if you want your stitches to form on the left to the right? Is this allowed
@Chatterboxquilts3 жыл бұрын
You could try mirroring the stitches to see if this would work. I've never tried to do this but now will have to investigate further...
@lindaalley54113 жыл бұрын
I have a question. When I use a different color thread in the bobbin that thread shows on the front of my project. What am I doing wrong?
@Chatterboxquilts3 жыл бұрын
It's difficult to to not have any bobbin thread showing on the front of your project but you can minimize this by adjusting your top tension. Check out my video on fixing thread tension for information on this at kzfaq.info/get/bejne/fqiSnLdy1N_bmY0.html